-
Does the 17 Logo 408 need to be released after replacing the rear brake pads? Personally, I don't think it should be necessary, because replacing the brake pads in the car is relatively not a big project, as long as the wheels are simply removed, they can be replaced.
-
After replacing this rear brake pad, it is best to release it, so that it will have a certain effect when it is installed as a whole.
-
Look at the mark together, the 408 cm rear brake pad is the electronic division of the key put there? We are the key to their sign of the east wind.
-
After the replacement of the 17th Peugeot 408, do the brake pad electronic cylinders need to be released? This is what is needed, and you can just make it clear to him after he is released.
-
After replacing the brake pads of the 17 Peugeot 408, do the electronic cylinders need to be 40 pcs? 17 Peugeot 408 replacement brake pad cylinders need to be released.
-
After the brake pads of the 17 Peugeot 408 are replaced, the electronic cylinder can release the pressure.
-
First, the seven signs 408 need to be released after replacing the rear brake pads after the electronic wind pump, otherwise it is difficult to handle.
-
17 logos, 408 need to be released after replacing the rear brake pads? 17 logos, 408 replacement rear brake pads after the electronic purchase needs to be released.
-
It must be able to provide stable, sufficient and controllable braking force, and have good hydraulic transmission and heat dissipation capacity to ensure that the force exerted by the driver from the brake pedal can be fully and effectively transmitted to the master cylinder and each sub-cylinder, and avoid hydraulic failure and brake degradation caused by high heat.
Service life. Brake pad replacement depends on how long your gasket has been in your car life. Generally, if you have traveled more than 80,000 kilometers, the brake pads need to be replaced. But if you hear from your wheels.
-
1. Remove the rear wheel, connect the diagnostic instrument, and lift the vehicle;
2. Turn on the ignition switch, release the handbrake (the rear wheel can rotate freely), and enter the test program;
3, enter 53 parking brake system;
4. Enter the basic settings of the 04 system;
5. Enter channel number 007, you can listen to the sound of the motor rotating of the rear wheel, which lasts for about 5 seconds. The two rear parking brake motors are retracted. The top sub-pump can remove the old brake pads;
-
Hello. Those who repair the car will be replaced. There is no difficulty. Let's go to the repair shop and fix it.
We'd love to answer your questions. The support of your argument faction is the driving force for our automobile masters to move forward! [If there is a problem with the car, then Sun asks the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
15 years Dongfeng logo 408 electronic rear brake pad replacement method.
-
The electronic handbrake generally needs to be decoded by the electric finch smile brain to be replaced. I hope it can help you and I wish you a happy life! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes banquet with clock solution. 】
-
Find a professional shop to replace [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Reset with a computer [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Let me tell you, hello brake pads depend on the wear and tear, some people use faster, some people use slower, this suggestion can be replaced according to the thickness, the thickness is less than 16 mm and can be replaced directly.
Thank you for using, I hope mine can help you, if I can help you it would be great, if there is anything you don't understand or don't understand, you can continue to ask, I will definitely try my best to serve you! [If you have a problem with the car, ask the car. 4S professional technician, 10 minutes to solve. 】
May my answer be helpful to you!
-
Hello car owner, you need to check whether the rear brake pads are thin or not, and they do not need to be replaced if they are not thin, which depends on the use of individuals.
-
Hello car owner. Back. It is advisable to check it out.
-
Hello, you need to look at the thickness of the brake pads, which has nothing to do with the number of kilometers.
-
Hello, the brake pads depend on the wear and tear, some people use it faster, some people use it slowly, this suggestion can be replaced according to the thickness, and the thickness is less than the millimeter can be replaced directly.
Thank you for using, I hope my answer can help you, if it can help you it would be great, if there is anything you don't understand or don't understand, you can continue to ask, I will definitely try my best to serve you! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Hello, the brake pads are generally replaced at about 50,000 kilometers, according to personal driving habits, the standard for replacing brake pads is to measure the thickness of the brake pads less than 3 mm, it is recommended to replace. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Generally, if there is a distance of more than 10,000-30,000 kilometers, the brake pads need to be replaced. However, if you hear a grinding sound from the wheels, you should replace the brake pads, regardless of the mileage.
How to see if the brake pads should be changed:
1. Look at the thickness of the brake padsWhen the thickness of the brake pads becomes very thin, the braking performance will drop significantly, affecting driving safety. Generally, the thickness of the new brake pads is about the same, and when the brake pads are worn to the point that they are left, you have to increase the frequency of self-inspection. When the brake pads are worn to only when you must replace them in time, this is the limit of the thinnest replacement of the brake disc, don't drag, accidents occur in minutes.
2. The driving computer prompts the replacement of the brake warning light on the dashboard of the general car, and when the warning light is on, it reminds you to check the brake pads, but the warning light indicates that it has reached the limit of replacement and must be checked immediately. All cars have this warning system, but some directly sense the thickness of the brake pads, and some are completely worn out, and the extreme drop in brake fluid will make the warning lights illuminate.
3. Listen to the sound of the brake disc is mostly iron, especially after parking for a long time, especially in rainy days, it is easy to appear rust, at this time, stepping on the brake will be accompanied by a slight sound, this sound will disappear after driving for a period of time after stepping on the brake. However, if it does not improve after a period of time, the brake pads must be replaced immediately. Because the limit markings on both sides of the brake pads have directly rubbed against the brake disc, it proves that the brake pads have exceeded the limit.
And in this case, the brake pads should be replaced at the same time with the inspection of the brake disc, when this sound often the brake disc has been damaged, even if the new brake pad is replaced, the sound can not be eliminated, and the brake disc needs to be replaced in serious cases.
4. Brake response and stroke When the brake pads become thinner, the brake response of the car will also become sluggish, and we need to step on the brakes deeper and heavier to achieve the previous braking effect. When you find that the braking effect is significantly weakened in the first half of the brake, the brakes become softer, and you can't brake a little, you need to check whether the brake pads need to be replaced.
-
After all, it involves safety issues when going to the auto repair shop, and if you are not sure, you can find a professional, and the installation cost will not be very expensive.
-
Brake pads are not fixed how often to change the statement, it depends on the driving road conditions and driving habits, these habits will affect the use of brake pads, if you can grasp it well, you will find that many times there is no need to step on the brakes, a pair of brake pads are used well, can reach 100,000 kilometers.
So, when you need to replace the brake pads, you can check them regularly through the following items, and if you meet the conditions, you have to replace them immediately.
1. Check the thickness of the brake pads.
Check whether the brake pads are thin, you can use a small flashlight to observe and check, when the inspection finds that the black friction material of the brake pads is almost worn out, and the thickness is less than 5 mm, you should consider replacing it.
2. The sound of brakes.
If in the process of daily driving, the brake hears a harsh metal whistling sound, at this time you should pay attention, this is the alarm iron plate on the brake pad has begun to wear out the brake disc, so there will be this kind of sharp metal sound.
3. Braking strength.
When driving on the road and stepping on the brakes, if you feel very hard, there is always a soft feeling, often need to step on the brakes deeper to achieve the previous braking effect, when taking emergency braking, you will obviously feel that the pedal position is low, then it may be that the brake pads have basically lost friction, at this time must be replaced, otherwise it will cause serious accidents.
In addition, the reduction of braking effect will lead to an increase in brake fluid consumption, so it is important to check the condition of brake fluid when replacing brake pads.
If the brake pad has an induction line, a red word "Please check the brake pad" will appear in the alarm. Then there is an icon, which is a circle, surrounded by several dotted brackets, when the warning light is lit up, it is quite dangerous, because this warning system has a direct sense of the thickness of the brake pads, and some are in the brake pads have been completely worn out, and the brake fluid is therefore extremely reduced, so that the warning lights will be lit.
-
Generally, 8 to 100,000 km replacement.
-
Brake pads need to be checked regularly, not when you feel abnormal;
Generally, the brake pads of the disc brake wear out quickly, basically about 30,000 kilometers to replace, and should be checked once every 10,000 kilometers;
Generally, the brake pads of the drum brake are replaced for 60,000 kilometers, and they are generally checked once every 20,000 kilometers;
The brake fluid and booster oil are replaced every 60,000 kilometers, and the antifreeze is replaced for the first time every 2 years, and then once a year;
As for the engine oil, change it once every 5000 kilometers, this is daily maintenance, and it can't be changed if you don't change it! The oil grid is generally replaced once every 10,000 kilometers, and the oil is changed together, which is better for the maintenance of the car.
First of all, the brake should be high after replacing the brake pads, if the brake is not only not high, but it only works when pressed to the end, it is the problem of the brake master cylinder, and the plunger of the brake master cylinder should be sticky. In this case, it is recommended to replace it together with the brake oil, because after changing the brake pads, the brake master cylinder can not suck the brake oil in the brake oil cup into the brake master cylinder, so when the brake is lifted, the oil in the brake cylinder flows back to the brake master cylinder, forming a gap between the brake disc and the brake pad is too large, so when the brake is stepped on, the brake oil in the brake master cylinder is filling the brake cylinder, filling to the contact between the brake disc and the plate, so the brake is particularly low. Therefore, it is necessary to change the brake oil, one is to ensure the cleanliness of the oil, and the other is to fully clean the brake master cylinder so that the plunger can work more normally. >>>More
The replacement time cycle of brake pads is not fixed, it depends on the road conditions of the vehicle, the frequency and strength of the driver pressing the brake pedal, generally speaking, the life of the brake pads of the front brake is 35,000 kilometers, and the life of the rear brake pads is 6-10w kilometers, so it is recommended to check the front brake pads every 30,000 kilometers. >>>More
Generally, when driving at 4 to 5 km, it is necessary to replace the brake pads. Pay attention to the better way, but also pay attention to the use of some professional props. I removed the brake calipers first, and I also wanted to protect the wheels, and I also paid attention to the kilometers I traveled.
Hello, when changing the brake pads, you first need to use a jack to support the wheel, support the wheel and suspend it, and then remove the tire screws, and then remove the fixing screws of the pump, and then use a special tool to press the piston of the sub-pump to the lowest position, install the new brake pads, and then install the relevant screws.
Hello, depending on the usage of individuals, generally about 40,000.