Which is the best prefabricated special design software?

1) Determine the maximum size and weight of the assembled unit according to the actual conditions of prefabrication, transportation and lifting at the bridge construction site.

2) The division of the block should meet the force requirements, and the assembled joint should be set at the place where the internal force is small.

The prefabricated type is equipped with a professional design and order splitting software - second elephant, it is very convenient to use once, and the biggest advantage is that the amount of single splitting is designed to be the first internal structural parts at the same time.

<> beepc sandwich wall drawing effect.

Recommend beepc, I tried it for a week and the effect was very satisfying, and the service was particularly good, the official group was responsible for explaining the management at any time, and I took the drawings and drew a model out of the picture is the above one**, professional and beautiful!

I have been in contact with the Revit platform a lot, such as red tile, beepc, and Hongye, Hongye focuses on the deepening of mechanical and electrical aspects, while the focus of red tile is on mold turning. In short, the development of Hongye and Hongwa software is not from structural design. Behind the Little Bee software are structural designers guiding the development (I later learned that their boss is a double note), so as a structural designer, I instantly became interested in Little Bee.

Beepc is not bad, you can use it, the software is very landed, the development speed is also very fast, based on the Revit platform, the post-processing model is also more convenient.

ZDPC assembly deepening software, currently the best to use. Fast speed and simple operation.

Damn, I've also used beepc, it's really convenient, it's easy to get started, and the drawing annotation is quite fine.

At present, all kinds of domestic software are useful, Tekla and Revit are more commonly used, and there are some such as PKPM-PC, PlanBar, etc.

Beepc is recommended, and many prefabricated enterprises have purchased it.

At present, I have tried the commonly used ones in China, such as PKPM, BEEPC, and ZDPC, and each has its own merits! If your computer configuration is not high, it is recommended to choose ZDPC, the other two have certain hardware requirements! In particular, beepc will be more stuck when doing larger public construction projects!

Beepc we are also using, really good, at the beginning with CAD, it is simply life-threatening, that is not mental work, fighting is physical strength, and then tried several deepening design software, many software are part of the function OK, the overall application can not meet the needs of the actual project, to put it bluntly, are blowing while selling, there are many problems, not practical. Beepc has been using it for almost a year, and it is indeed possible, and it was recommended by a friend who did deepening at the earliest, and I bought it after trying it. As for the good thing**, it's useless for me to say, and I thought I was trusting if I said too much, anyway, it's a free trial, and you can contact you to apply.

Now we are very short of people in the deepening design industry, and there should be few schools to train special students for deepening design, so our circle is basically the traditional design of the turn, and the school should indeed cultivate some talents in the direction of assembly, the country so vigorously promote the assembly, assembly is the general trend. So this teacher, if you want to take the prefabricated deepening design teaching course, you can also learn about the software I said, of course, like planbar, tekla, pkpm, yjk, etc., you can understand the comparison, we also compared the choice of beepc before, at present, the entire prefabricated deepening design industry is really using special deepening design software, in fact, there are not many, but basically tried to use beepc, and finally do not use cad. At present, most of the CAD is used, on the one hand, it may be that the company is too picky, unwilling to spend money on software, on the other hand, it may be that they don't know about beepc and haven't tried it.

Just a little personal opinion for your reference.

At present, the domestic prefabricated building PC deepening design software mainly includes: TEKLA, PLANBAR, PKPM, YJK, BEEPC, ZDPC, etc. Tekla, PlanBar are foreign software.

PKPM and YJK are well-established building structure software. ZDPC is a late-stage show, with simple operation, super fast speed and super good performance; The BIM model is automatically generated in 1 minute, 1500 detailed drawings and all BOM bills of materials can be exported with one click in 1 minute, and it only takes 3 seconds to detect and avoid the reinforcement collision of the whole building; Well worth a try :.

Brother, try the buzzing beepc, one-click layout numbering drawing, easy to get started, the drawing effect is also good, suitable for projects.

At present, the most practical and easy to use Revit platform should be beepc, and the others are a bit difficult to use

Red tile and beepc can be tried. Hands-on practice is king.

The design software of other people's computers does not need to be modeled, just spend money to buy it, I can help you design it, ug, catia, solidworks.

No need to model will lead to errors in the calculation, the core wall function of the second image software, knowing the size, a set of conventional house types can be drawn in 3-5 minutes, and then you can deepen the design and typeset the calculation.

Now the mainstream is divided into two major platforms, Revit and Tekla, both need plug-in software, Revit platform Beepc is currently doing the most practical project, the others are not good, Tekla platform is not very clear what plug-ins are there, but Tekla is very expensive and still sends a lawyer's letter at every turn, Revit is an Autodesk platform, you know, "support genuine".

beepc is really good,,Very easy to get started,We only bought one account in the factory at the beginning,Now we have bought 6 accounts,I want to buy more。

You can try EasyBOM, extract 100 drawings BOM in 10 seconds, save time and efficiency. Prefabricated building deepening designer is a must-have.

The building adopts a hollow design, and the earthquake resistance of the house is relatively high, and it can even reach 3-5 times that of an ordinary house.

BEEPC is good, there are many domestic enterprise-level users, based on the Revit platform, easy to get started and easy to operate;

beepc's plotting effect.

In the modeling process, the parameters combined with the canvas mode are easy to use, and the picture is exported with one click, and the effect is very professional and beautiful!

The company has been adhering to the concept of "no one has me, no one has me", and strives to be the "global leader in digital construction". It is reported that ZDPC is based on the doctoral team of Zhejiang University and experts from well-known architectural design institutes in China for 10 years of independent research and development of PC deepening design software, the software integrates automatic identification of structural construction drawings, automatic BIM modeling, intelligent modeling, automatic component splitting, intelligent collision detection and avoidance, one-click intelligent drawing export PC deepening drawings and BOM bill of materials and other multi-functional integration, so that the most important part of the prefabricated building PC deepening drawing can be quickly generated.

ZDPC combines artificial intelligence with prefabricated building design to achieve intelligent computing, so that designers can get rid of simple mechanical work, further reduce the error rate in the production and construction process, achieve good economy, and reduce the waste of various resources.

The prefabricated type is equipped with a professional design and order splitting software - second elephant, it is very convenient to use once, and the biggest advantage is that the amount of order splitting is calculated, and the design can be the best internal structural parts at the same time. You can get the dosage with one click.

Two days ago, I saw the new PC software of Explorer Software, the functions are more comprehensive, and the professional understanding of the structure is deep, and I feel good, and I plan to try it first.

Assembly includes the following stages, and you can choose the software according to your application requirements:

1. Design software:

CAD, TENGEN, Revit, Bentley, TEKLA, CATIA, ARCHICAD, PKPM, Explorer, TENGEN, Hongye, Lizheng, etc.

2. Analysis software:

PKPM Structural Analysis, Yingjianke Structural Analysis, Hongye HVAC Analysis, PKPM Energy Saving, Tsinghua Rizhao, Midas.

3. Cost software:

Swell Revit Cost BIM Software, Luban Revit Cost BIM Software, Pinming Revit Cost BIM Software, Glodon Cost BIM Software.

4. Construction software:

bim5d、itwo

5. Operation and maintenance software:

Archibus, Blue Planet.

Prefabricated decoration can be done with archicad.

I am a prefabricated public decoration designer, if it is the BIM software of the prefabricated building structure, I don't know very well, but I still have a little say in the interior decoration, I am now using the second elephant digital decoration software, it is said to be the first BIM software in China to open up the whole process of prefabricated decoration, from my use point of view, it is indeed not a boast. Before using this software, I used a variety of traditional software to co-design, which was time-consuming and error-prone, and Miaoxiang helped me solve these problems very well. The preset components inside allow me to design and calculate materials with one click, and the order is directly split into factory production.

Extraction code: gcqubeepc**tutorial|"Deepening Design of Concrete Components of Prefabricated Buildings" textbook supporting beepc**tutorial|beepc**Recording|47. The wall is freely arranged - the wall is drawn. mp4|46. Wall canvas drawing (below).

mp4|45. Wall canvas drawing (above).mp4|44. Wall mirroring, wall free numbering. mp4|43. Free arrangement of the wall - arrangement of auxiliary components.

mp4|42. Free arrangement of the wall - case (below).mp4|41. Free arrangement of the wall - case (above).mp4|40. Free arrangement of the wall - rapid reinforcement (connecting beams).

mp4|39. Free arrangement of walls - rapid reinforcement (infill walls, outer leaf plates).mp4|38. Free arrangement of the wall - rapid reinforcement (shear wall, edge members).mp4|37. Free arrangement of the wall (reinforcement-arrangement rules).

mp4|36. Free arrangement of the wall (auxiliary function).mp4<>

BEEPC software, in-depth secondary development based on Revit platform, parametric modeling, one-click numbering, one-click drawing, automatic BOM table.

At present, there are two more mainstream deepening software based on the Tekla platform and the Revit platform on the market, based on the Revit more mainstream, there are explorers, beepc, red tiles, etc., and PKPM based on their own platform is not particularly easy to use You can also try it all for yourself

There are quite a lot of software on the market, both abroad and at home, most of them have been understood in order to do projects before, how to say it, each has its own advantages and disadvantages, just take planbar as an example, the function is quite powerful, but ** dead expensive (genuine), small units will be a little difficult to buy, tekla is the same, after all, people's independent platforms are not just prefabricated type; In China, such as PKPM and Yingjianke, there are now prefabricated modules for structural software, which can be seen. Personally, I still recommend beepc software, it's quite fast to learn, mainly because the form of visual modeling is clearer, and the final drawings are also in line with factory production (after the drawings need to be slightly adjusted, but acceptable), after-sales service is also good, and the administrators in the group have replied quite timely. They have a group that you can understand

Finally: Spit about Hongye's Rubik's Cube 2019, it's really not good, 2333...

<> horizontal comparison of several domestic software.

At present, although there are many domestic prefabricated software, it is nothing more than these software that are really accepted by the market and used in actual projects, which can be referred to.

ZDPC assembly deepening software is very fast and relatively simple to operate.

beepc is really good,,Very easy to get started,We only bought one in the factory at the beginning,Now we have bought 6,I want to buy more.

I'll go, I've used this software, it's really good, I learned it after two days of playing. Later, our company leaders bought it. The update is also very fast, they do it very finely, I have used a lot of software, and it is really rare to do it so fine like beepc.

BEEPC, which specializes in the deepening design of concrete prefabricated components, is very quick to get started, and the key cutting table is also accurate.

Commonly used software for structural design are: PRO E, UG, SOLIDWORKS, etc., PROE uses more people, most of the structural design uses PROE, molds use UG, and non-standard machinery uses SOLIDWORKS. It depends on personal usage habits.

ANSYS is recommended

ANSYS software is a large-scale general finite element analysis (FEA) software developed by ANSYS in the United States, which is the fastest growing computer-aided engineering (CAE) software in the world, which can interface with most computer-aided design (CAD) software to achieve data sharing and exchange, such as Creo, Nastran, Alogor, I Deas, AutoCAD, etc. It is a large-scale general finite element analysis software that integrates structure, fluid, electric field, magnetic field and acoustic field analysis. It has a wide range of applications in nuclear industry, railway, petrochemical, aerospace, machinery manufacturing, energy, automobile transportation, national defense and military industry, electronics, civil engineering, shipbuilding, biomedicine, light industry, geology and mining, water conservancy, household appliances and other fields.

Powerful, simple and convenient, ANSYS has become the most popular finite element analysis software in the world, and has been ranked first in FEA evaluations over the years. At present, more than 100 science and engineering colleges in China use ANSYS software for finite element analysis or as standard teaching software.