Is it appropriate to burn honeycomb coal or coal?

I don't know where you are, I'm from the Northeast, honeycomb coal.

Do you know what it's made of? It is the pulverized coal in the mine and the water, referred to as the slime, and then mixed with a large amount of clay, stirred evenly, and finally sprayed with industrial combustion when the billet is removed, generally a piece, a piece of 2 catties, a ton is 1000 yuan, you use the best furnace (700-1100) yuan, that is, the lowest once into the coal 36 yuan, you order it once at night, how much do you calculate? And that thing, the heat is very slow, it takes about 2 hours to feel the heat in the house, the heat is very low, it is better for you to order it all day, so that it can play a warm role, and the air pressure is low.

It is also easy to be poisoned by gas.

If it's a small stove with 12 pieces, I advise you not to use it. (Note: There is a special sale of slime, only 140-160 yuan a ton) Northeast Jixi.

There are several kinds of coal in the mine, the best 700 yuan tons, almost 500-550 tons, the heat energy is high and fast, too hot can also be mixed with some soil or something, my store last year is the honeycomb coal, I point all day, 72-90 pieces a day, and finally the heating is frozen, (I have to say that it was too cold last winter) this year I changed the heating and stove, are burning raw coal, I calculated, or burning raw coal to save a little money. What I said is not necessarily right, you can calculate it yourself, and if you also light a stove fire, you can use a few shovels of raw coal, use a few pieces of honeycomb coal, and what calorific ...... can you achieveHehehe.

Honeycomb coal is suitable, the furnace should be extinguished once, and the amount of three or four pieces of honeycomb coal should be used to ignite the coal in the furnace with coal, if it is honeycomb coal, at most two pieces, plus a few pieces of wood, if you can, use some oil, so that the speed is saved.

It is more convenient to use honeycomb coal, which is easy to preserve, and the stoves used are also more advanced.

Of course, honeycomb coal borrows resources.

Use a lighter or match to ignite directly on the honeycomb coal, which is convenient and fast.

Honeycomb coal is composed of raw coal, carbonized sawdust, lime, red (yellow) mud, charcoal powder and other mixed base materials and flammable accelerants composed of nitrate and potassium permanganate.

Honeycomb coal can boil 6-8 kg more boiling water than traditional honeycomb coal, blue fire, can be compared with liquefied gas, carbon monoxide and sulfur dioxide gas produced in honeycomb coal can be effectively controlled and converted, so that the discharged gas does not cause air pollution, is not easy to break, easy to transport and store.

1. Honeycomb coal.

Combustion releases carbon monoxide, which can cause carbon monoxide poisoning when the concentration of carbon monoxide rises.

2. Honeycomb coal combustion produces dust and sulfur dioxide.

The injury is the respiratory system.

and the circulatory system.

3. The smoke produced by long-term coal burning is not good for the lungs. Prone to cancer. Excessive psychological stress. Hair can also fall out.

Use a lighter or match in honeycomb coal.

It can be lit directly, and it is convenient and fast to use at any time.

Honeycomb coal is composed of raw coal, carbonized sawdust, lime, red (yellow) mud, charcoal powder and other mixed base materials and nitrate, potassium permanganate.

and so on.

Honeycomb coal can boil 6-8 kg more water than traditional honeycomb coal, blue fire, can be compared with liquid source liquefied gas, carbon monoxide produced in honeycomb coal.

and sulfur dioxide gas are effectively controlled and converted, so that the discharged gas does not cause air pollution, is not easy to break, and is convenient for transportation and storage.

It can be placed on the stovetop to ignite, and then used to ignite the other unlit ones, which is the fastest.

High-efficiency flammable honeycomb coal: production technology: 2 minutes fast on the fire flame up to one foot, the fire is fierce, 12 minutes to boil a pot of water.

The briquettes are flammable, fast, with a match from the mouth of the furnace that is ignited, 2 minutes of flame up to a foot, the temperature of the furnace can reach 680, and can adjust the size of the flame, easy to use, and liquefied gas, with the use of the point.

No need to seal the furnace, smokeless, non-toxic, tasteless, put 2 briquettes at a time can burn for 120 150 minutes. The investment is small and the effect is fast, and it is made of ordinary loose coal and a mixture of several worthless raw materials and two additives.

Honeycomb coal technology for straw production:

It is prepared by combining straw powder and inferior coal as the basic raw material, adding desulfurizer to reduce slaked lime, and then making it by surface treatment with a surface treatment agent made of paraffin wax and heavy oil after forming, which is the forming coal that can make crop straw be fully and effectively utilized.

The above content reference: Encyclopedia - honeycomb coal.

How many hours can honeycomb coal (briquettes) burn in one piece.

Combustion requires a certain environment: combustibles, oxygen, temperature. A single briquette cannot be burned because it cannot maintain temperature.

Briquettes can only burn normally in the stove, and at least two briquettes are needed in the stove, and the general household stove needs to put three briquettes at the same time to boil water for cooking.

The burning time and usage of briquettes are closely related, if you just keep the briquette fire burning, leave only a small hole in the vent of the briquette, a briquette can burn for about 12 hours, and you need to change two pieces of coal a day.

If it is used to boil water for cooking, a briquette can burn for up to 6 hours before and after, and 4 briquettes need to be replaced a day.

Can burned honeycomb coal be planted.

Burned honeycomb coal cannot be planted directly, because burned honeycomb coal is very alkaline, and planting flowers directly will hurt the flowers. However, the treated honeycomb coal can be used to grow flowers, and the treated burned honeycomb coal can be used to grow flowers, which can increase the pH value of the soil for planting flowers, increase the air permeability and drainage of the soil, and reduce the root rot of flowers.

Burnt honeycomb coal flower points.

Burned honeycomb coal is suitable for planting what flowers.

The treated honeycomb coal can be used to grow succulents, carnations, asparagus, red resistant silver palms and other plants.

Burned honeycomb coal flower method.

First, use an awl or iron rod to crack the burned honeycomb coal into pieces. Be careful not to knock too much and smash into cinders the size of lotus seeds. After fighting, use a sieve to sift the cinders and remove the cinder foam that cannot be used too finely.

Finally, soak the cinders in clean water for 3 days. During this period, it is necessary to wash and change the water frequently, and remove the alkalinity of the cinder as much as possible by soaking in water. Rinse with clean water before mixing cinders with the soil.

Precautions for burned honeycomb coal flowers.

When planting flowers with treated burned honeycomb coal, it should be noted that the honeycomb coal should be mixed with the soil in a ratio of 6 to 4, and it should be soaked in water to remove the alkalinity of the honeycomb coal.