win7 multiple network in 9 other people s computers,How to clear these?

Win8 Steps to Clean PC Junk:

1. First open "Computer", select the partition where the system is located, and right-click Properties Disk Cleanup;

2. After opening Disk Cleanup, it will automatically scan the files that can be cleaned;

3. After the scan is over, don't clean it up yet, click "Clean System Files";

4. Then it will be scanned again;

5. You can select all of them here, and the "previous windows installation" is the stuff inside;

6. Start cleaning up after confirmation, and wait until the cleaning is over to see if the remaining space of the C drive is vacant a lot. Upgrading from an old version of the system to a new version of the system, whether it is an upgrade installation or a custom installation, as long as the partition is not formatted, there will be a folder.

1. Use the left mouse button to click the network icon on the taskbar to display.

Multiple networks. 2. Solution: Right-click the network connection icon on the taskbar to open the Network and Sharing Center.

3. Hover over the icon under View Active Network, wait until the mouse becomes a gesture, and then click Open Set Network Properties.

4. Set network properties to merge or delete network locations.

5. After opening it, you will find that the previously connected networks are here.

6. Then, click on the unwanted connection, and the merge and delete buttons in the lower left corner will change from gray (unavailable) to usable.

7. Open the network and sharing center again, and it will be normal.

1. Click Start to find "Control Panel" in the menu and click in.

2. Find "Network and Sharing Center" in the pop-up window and click in.

3. Click the "Network" icon in the pop-up window of the Network and Sharing Center.

4. Click the network icon to pop up at the bottom of the setting network properties window, and click "Merge or delete network locations".

5. Find "Network Location" in the window that pops up to merge or delete network locations, select the network you want to merge or delete, and then move the mouse to the bottom and click the merge or delete button.

On the Win7 system tray click on the "Network and Sharing Center" item, and then on the Network and Internet panel, click on the "Change adapter settings" item.

On the displayed Network Connection dialog box, right-click the Local Connection item and select Properties. Then uncheck the "Use the following options for this connection" under the Network tab, leaving only the "QoS Packet Scheduler" entry. Then click the OK button.

The last step is to reconnect the "broadband connection", and you can see that the multiple networks on the win7 system have disappeared.

Click to change the adapter settings (there is that option on the left side of the ** below) and then go inside to delete it, if you can't delete it, it's okay to disable it.

Open the properties of the local connection and uncheck all the checks in front of ipv6 ipv4 Note: The ipv6 ipv4 cancellation here is inside the local connection, not the broadband connection.

Then it's OK and your multiple networks become broadband connections.

Select the Internet Protocol version IPv4 attribute of one of the connections to automatically get the IP address.

(PS: My computer is automatically obtained IP, and the Internet access method is dynamic IP.) At that time, the reason for the "unrecognized network" was that although the IP address was automatically obtained, the number in the default gateway below was not completely cleared, resulting in multiple networks.

Other Internet access methods such as PPPoE or static IP are not suitable for use. ）

The specific steps are as follows for reference:

1.Open the Network and Sharing Center.

2.Click "Change adapter settings" on the left

3.Right-click on "Local Connection" and click on "Properties".

4.Select Agreement Version 4 and click Properties.

5.Check whether there is a number in the "default gateway", if so, clear the number, select automatically obtain the IP, and the multiple networks will be cleared.

In the "Network & Sharing Center" (Control Panel, Network & Internat, Network & Sharing Center, or just click on the computer icon in the bottom right corner), click on "Change adapter settings" on the left and disable all connections that are not connected to the Internet!

Please note: If you are using ADSL, you will only have "Local Connection" and "Broadband Internet".

If you use routing, only "local connection" or "wireless network connection" will be left

In addition, if there is a virtual machine, there must be multiple networks, otherwise the virtual machine cannot be connected to the network (VMware, VPC XPMODE, virtual box and other software), these links may not be available, but there will be a few of them, and the others can be disabled!

Turn off sharing and turn off wireless.

Workaround:

Open the Network and Sharing Center.

Click on "Change adapter settings" on the third line in the upper left corner of the window.

The "Network Connection" dialog box appears, right-click "Local Connection", select "Properties", and under the "Network" tab, remove the "This connection uses the following options" in front of each option, leaving only the "QoS Packet Scheduler" option in front of . Then "OK".

Reconnect the "broadband connection" so that there is no "multi-network".

You have multiple network cards (or Bluetooth-like) on your machine, and those network cards are already wired.

It doesn't matter what it does, it doesn't affect the use of ah.

Haha, I don't understand what the question means.