Build a master of the machine about ATI graphics card firefight

Your machine can't mix firefights. Because the motherboard chipset is Intel's,And the hybrid firefire must buy a separate display with the same chip as the integrated display.。。

It's rubbish. It's all rubbish cards.

You can change the graphics card, it is recommended to choose GTX260+

Don't think that you can't play its performance.

In fact, the performance of U is generally excessive.

The most that the E5200 can be equipped with is the GTX260+.

The price point is around 1000.

If you think it's too expensive, you can choose 4850,800 yuan. 4,830,599 yuan.

These graphics cards are all orders of magnitude stronger than the 4350.

Your machine can't use a hybrid crossfire because your U is an E5200, which means that your motherboard will certainly not be an integrated AMD chipset, so it's impossible to mix a crossfire.

If you want to improve performance, changing the graphics card is the most direct and practical way, replacing a 500 yuan HD4670 or 9600GSO, you can improve the game performance of your machine by 100%.

Crossfire is a rubbish technology.

The power consumption of 1+1 is greater than 2.

Performance of 1+1 less than 2.

No, only AMD's 780G, 790GX chipset motherboards support hybrid crossfire, and only support ultra-low-end graphics cards such as 3450, so dispel the idea. Why don't you change the board?

Must use Vista system,Currently does not support WinXP,You need to put it after booting。

The options in the zhibios settings are set as follows:

1. Advanced chipset features PCIe configuration hybrid crossfire control:auto

2、advanced chipset features/igx configuration/uma frame buffer size：256mb

3、miscellaneous control/init display first：igx

4. Install the graphics card on the PE1 slot of the motherboard, and install the PCIe daughter card on the PE3 slot (otherwise the graphics card can only work in PCIe X8 mode;

6. After installing the graphics card driver, select "Start" in the Catalyst Control Center of the graphics card console.

Extended Content:

Crossfire graphics means that integrated graphics and discrete graphics work together to maximize performance. Therefore, in terms of performance, AMD's unique crossfire technology is better than the graphics card switching technology, and AMD has both graphics card crossfire technology and graphics card switching technology.

1. AMD AP turns on dual graphics card crossfire technology, you need to enable dual memory channels, for example, a single memory will definitely not be satisfied, and dual memory can be formed into dual channels. You can use CPU-Z to tell if the memory has dual-channel mode enabled. As shown in the figure below, the memory is in dual-channel mode.

2. Right-click on the blank space on the desktop and select "AMD Vision Engine Control Center" to open the AMD graphics card console.

3. After entering the interface, click "Preferences" in the upper right corner and select "Advanced View".

4. Click "Performance" on the left side, and then click "AMD Radeon Dual Graphics", you can choose to enable and disable dual graphics card firefight mode as needed. Once you've made your selection, click "Apply" in the lower right corner.

5. The interface of turning on and off the crossfire mode for some models of graphics card drivers is as shown below, and the previous operation steps are the same. Selecting "Enable Crossfire" means turning on Crossfire Mode, and turning it off otherwise. After you select it, click "Apply" in the lower right corner and the settings will take effect.

Crossfire can improve the performance of the original discrete graphics card.

But the performance of your original 6450 is quite poor, and the performance of the low-end card is still a low-end card after the firefight, and it can't catch up with the current mainstream 5-600 yuan or more independent graphics card.

The specific firefight steps are as follows, 3. Then press the DEL button to enter the BIOS. Take ASRock A75 Pro4

For example, when you go to the Northbridge adjustment option, you can see that there is a "Dual Graphics Surround."

view" option, we set it to "enabled", so that we have enabled the dual graphics crossfire feature from the hardware settings. Next, we need to open the dual graphics card from the system's catalyst control center.

Crossfire function, please continue.

4. Boot into the system, first wait for the system to load the driver for the newly installed discrete graphics card (it may need to be restarted), then we right-click on the blank space of the desktop, select the "AMD Vision Engine Control Center" option, and enter the Vision Integrated Drive Control Center.

5. Right-click on the blank space of the desktop, select the "AMD Vision Engine Control Center" option, in the Vision Integrated Drive Control Center, we can find "Perfomance" in the tab on the left'option, click on it, and you can see the "AMD Crossfire" option in the submenu below.

6. After clicking on the "AMD Crossfire" option, in the dialog box that pops up on the right, we need to check "Enable."

CrossFire" option, at this time the screen may have a flickering or a short black screen, wait for a while, APU

The dual-graphics crossfire function has been turned on from the software. It should be noted that it is best to reboot the system at this time to ensure that the dual graphics card crossfire function is 100% successful.

As shown below:

The first step of the firefight: platform formation.

Select a chassis that supports the front interface.

The crossfire platform does not have high requirements for the chassis power supply, the power supply only needs to be rated at 300W, which is fully enough for the platform power supply, and in the selection of models, it is recommended to choose the chassis that supports the front expansion output, and the chassis with the front interface output will be a good choice.

After the platform is assembled, it should be noted that before the crossfire, do not install the independent display, and install the system and driver first under the integrated display (it is recommended to use the latest driver to better play the crossfire effect), and then carry out subsequent operations.

Crossfire Step 2: Installation of the system.

AMD's Hybrid CrossFireX technology, because it is a new technology, only supports the construction of dual-graphics crossfire platforms under Windows 7.

Crossfire Step 3: BIOS Setup.

BIOS language settings.

After the system and driver are installed, reboot the system, enter the BIOS interface, and set up the corresponding settings before the firefight.

Display options. Go to the Graphics Configuration sub-option under Advanced Options for the motherboard BIOS.

igd video

Select the Primary Video Device item and adjust the display mode to IGD Video mode.

Set to force

In order to improve the GPU core performance of the APU, you can also increase the shared video memory. Also under the Graphics Configuration option, turn on the Integrated Graphics option and adjust the option property to Force.

1G shared video memory.

After opening Force, you can see the Shared Video Memory adjustment option, and manually set the 1G Shared Video Memory.

Adjust the memory frequency.

Since the GPU of the APU shows that the cores share memory as video memory, the memory frequency also directly affects the graphics performance of the APU. In order to increase the memory frequency, we can go to the UNIKA OCT page in the BIOS, select the memory clock mode option, and change the automatic allocation of video memory to manual allocation.

Changed to 1866MHz

And in the MemClock Value option that appears later, adjust the memory frequency to 1866MHz. Now that the BIOS is set, press F10 to save the BIOS information and exit the BIOS settings interface.

Crossfire Step 4: The firefight is complete.

After installing the system, driver, and setting up the BIOS, you can plug in the independent graphics card.

After booting into the system, the driver will automatically recognize the dual graphics card, and will prompt whether to select the dual graphics card crossfire output, which is very convenient without the user setting it separately.

In addition, in the formation of a dual-graphics card crossfire platform, the display output is a centralized display output.

Right-click on the blank space of the desktop and select "Copy Display Card Properties".

This brings you to the Display Card Properties.

In Graphics Card Properties, select AMD Radeon Dual Graphics under Performance

Select "Enable AMD Radeon™ Dual Graphics" to enable hybrid crossfire.

This makes it possible to switch with a swappable graphics card.

Click on "Games" in "3D Application Settings (High Performance Graphics Card)" and click on "Add" to put the software you need to open with High Performance.

"Application Profile" appears and tap "OK".

Right-click on an empty space on the desktop and select "Show Card Category."

sex" to enter the "Display Card Properties" version. Right.

In Graphics Card Properties, select AMD Radeon Dual Graphics under Performance

Select "Enable AMD Radeon Dual Graphics" to turn on hybrid firefight.

There are several that can cause:

1. The distance between the two graphics cards is too close, after all, the two graphics cards that make up the crossfire are very close, and it is difficult to dissipate the heat in time.

2. The internal space of the chassis is compressed, and the heat dissipation is slow.

Solution: Add a case fan to speed up the air circulation inside the case, so that the heat can be effectively and quickly discharged, and the temperature will drop quickly.

The temperature of ATI series graphics cards is generally relatively high.

Dual graphics card firefight is originally high power,Very energy-consuming,And the performance is very high,The heat emitted is naturally more,It is recommended that you change to a better case,The power cord in the chassis will greatly affect heat dissipation、Airflow,The case can be installed with 4 fans is the best,2 blow 2 pump,Cool down in time,The fan refers to the chassis,Not the CPU、Graphics card。

First of all, your statement is wrong, it's not a firefight, it's SLI.

The N card you use, SLI is more troublesome, one is that the motherboard must have SLI authorization (can be cracked, to flash BIOS).

The second is that the two graphics cards have to be the same, and even have to be a card of one manufacturer and one model, and the A card firefight is not so strict.

Third, you have to consider the output capacity of the power supply, a 150W level only touch card A 100W level power supply, in consideration of the CPU, the power supply 12V power supply must output at least 330W power consumption, in order to leave a margin, the output capacity of 12V is best on 400W, such a power supply, the total power is estimated to be more than 550W, and the spacing of the PCIe graphics card slot of the motherboard, to avoid one of the 2 graphics cards can not be plugged in.

For your case, the core of the GTS250 and the 9800GT are completely different, so, for sure, it can't be SLI.

However, you can still use 2 graphics cards, with the GTS250 as the main card and the 9800GT as the physical acceleration subcard, which is not the SLI. In this way, in games such as the edge of the mirror, you can see the broken glass effect more refreshingly.

Since only the main card is rendering the picture, and the sub-card is only used for physical acceleration, it will not improve the smoothness in general games, and only in physics-accelerated games that support physx, the 9800GT will work. However, there aren't many physically accelerated gamers, so only the GTS250 is working alone in most games.

First of all, the technology of the dual SIM of the N card is called SLI, the core is different, and it may not be successful. Just turn it on in the driver.

It should be possible to set it up in the BIOS.

You're good. Mingxuan MS-EA770 Pro This board is good, praise it. But the N card is called sli, not a crossfire.

The graphics card firefight requires the same model, the same frequency, or even the same BIOS.

The 9800GT and GTS250 don't have one core. So there is no way to exchange fire.

If you think that the 9800GT is wasted, it is recommended to go out of the high mountain macro hand and upgrade other computer accessories.