Can a safety evaluator be affiliated Can a safety engineer be attached?

A safety evaluator is a person who adopts the methods and means of safety system engineering to conduct safety assessment of the risks existing in the production safety of construction projects and production and business operation units.

The main work of the safety assessor is as follows:

1) Conduct on-site investigation and collect relevant information;

2) Identification and analysis of existing dangerous and harmful factors;

3) Conduct qualitative and quantitative evaluation;

4) According to safety production regulations and evaluation results, put forward safety countermeasures to reduce risks;

5) Follow-up service for evaluation results.

Generally, units cannot afford to hire full-time registered safety assessors, and only large companies pay attention to safety production and have the ability to hire them. In addition, large companies generally require full-time safety managers to be registered safety engineers before they can be hired, so there is no need to be affiliated.

If you choose to be affiliated with an enterprise, and a safety accident occurs in an affiliated enterprise, you will first be liable, not only need to bear joint and several liability, but also bear criminal liability in serious cases.

Generally, units cannot afford to hire registered safety engineers, and only large companies pay attention to safety production and have the ability to hire them. However, large companies generally require full-time safety management personnel to be registered safety engineers before they can be hired, so there is no need to be affiliated. However, if you work safely and have a registered safety engineering practice certificate, the annual salary is at least 100,000 yuan; However, according to the relevant regulations, it cannot be affiliated.

At the same time, registered safety engineers are not supported by relevant mandatory policies (relevant legislative protection), so the relevant treatment is also very empty. If there is an accident in the affiliated enterprise, you will first bear the responsibility, not only joint and several liability, but also criminal liability if it is serious.

Of course you can, but it won't cost much.

Generally, it is not possible to be attached normally

Is it your own certificate? What is the major? Do you still have the certificate? This also depends on the major and region.

Yes, what kind of major, the first level is about 70,000 a year.

Yes, but it doesn't have much money, and 10,000 a year is very high, generally 5-6000

YesThe specific exam subjects and industry requirements are as follows:

Registered safety engineer refers to the professional and technical personnel who have passed the professional qualification examination for registered safety engineers and obtained the "Registered Safety Engineer Practice Qualification Certificate of the People's Republic of China".The full name of English is Certified Safety Engineer, abbreviated as CSE.

There are 7 specialties for registered safety engineers. Including: Coal Mine Safety; metal and non-metal mine safety; chemical safety; metal smelting safety; building construction safety; road transport safety; Other safety (excluding fire safety).

1. The practice industry of coal mine safety is the coal industry;

2. The practice industry of metal and non-metal mine safety is metal and non-metal mining industry;

3. The practice of chemical safety is chemical, pharmaceutical and other industries (including the production and storage of hazardous chemicals, oil and gas storage);

4. The practice industry of metal smelting safety is metallurgy and non-ferrous smelting industry;

5. The practice industry of construction safety is the construction industry;

6. The practice industries of road transport safety are road passenger transport, road transport of dangerous goods, road general cargo transport, motor vehicle maintenance and motor vehicle driving training industry;

7. Other safety categories refer to fireworks, civil goods, oil and gas exploitation, electric power and other industries other than the above-mentioned industries.

1) It can be attached, but it is not easy to attach, the responsibility is heavy, and it is usually not daring to be attached.

2) The anchorage fee is generally not high and unstable, ranging from about 200-800 yuan per month.

3) There are four subjects in the exam, which is not very difficult, and the pass rate is about 30-35%.

Hello I am also engaged in safety work, and I am currently taking the safety engineer exam, in my personal experience, now the safety management is becoming more and more strict, the responsibility for safety work is gradually increasing, and various regulations and penalties are also increasing. This certificate is still best in your own hands, and I suggest that this certificate should not be attached well.

If the registered safety engineer is attached, it is generally about 1w a year. It will be easier in the future, after all, the number of exams and policy requirements are increasing, and there will be more and more security people. There are risks, and the affiliation fee is also very low, so don't hang up if you don't lack money!

Common problems in the affiliation of security engineers: 1) ID card replacement problem If we use the old ID card when applying for the exam, then after passing the exam, the ID card is renewed, then we can not succeed in registering with the new ID card, which is necessary to go to the local police station to issue a certificate in order to register smoothly. 2) The certificate cannot be registered a, in addition to the first-class construction, there are other Ministry of Construction certificates registered in other units.

The certificate of the Ministry of Construction must be hung in one unit and cannot be separated. b. If the major is not matched, it must be a science and engineering major to register c. The graduation certificate does not match the ID card, and the name on the graduation certificate must be consistent with the ID card. d. The working years do not meet the requirements E, the documents are not complete F, the labor contract has no validity G, and the contract chapter is not clear 3) The problem of the dismissal certificate There is no strict format for the dismissal certificate, and the general enterprise will handle this, probably indicating that "XX has separated from the labor relationship with the company, and hereby prove" can be, in fact, it is mainly to look at that chapter.

4) How many years does the affiliation agreement usually take place? There is no specific provision for this, the general 1 to 3 years can be, some may feel that ** is rising every year or feel that the registration fee is high, and hope to transfer once a year; Some people may feel that it is troublesome to go around, it is better to sign directly for two or three years, which generally depends on the wishes of the individual and the requirements of the enterprise.

Hello classmates, theoretically speaking, the certificate of registered safety engineer can be attached, but in a practical sense, the social demand is not large, and the largest social demand is the registered builder, because the enterprises engaged in construction are the majority. There are not many companies that need safety production qualifications, because if each enterprise needs it, they have already trained their own employees to learn safety engineers, and there are few or no enterprises looking for affiliation in the society. The Certified Safety Professional exam is a four-subject exam:

Knowledge of safety production law and related laws, knowledge of safety production management, safety production technology, case analysis of safety production accidents. Compared with other registration exams, it is not very difficult, and the pass rate is higher, because the application threshold is not high, and you can apply for the examination with a technical secondary school degree or above.

1. Can the safety officer work certificate be hung?

Safety Officer Qualification Certificate.

Can be hung. Types of affiliation: There are generally two types of affiliation to other companies.

Under normal circumstances, in order to meet the needs of enterprises for the number of full-time personnel, this is a relatively common phenomenon in the market, and there is no risk in this way; The other is the affiliated project, in which case the risk exists. However, in this case, the affiliated enterprise must explain to the licensee, including mutual rights and obligations, remuneration, etc.

Second, the safety officer job responsibilities.

1. Familiar with the production environment and construction technology, fire prevention, theft prevention, injury prevention, poisoning prevention, etc., equipment maintenance management, etc. Assist the project manager to establish a safety production, safety protection, and machinery safety assurance system.

2. Investigate dynamic hidden dangers, and have the obligation to remind and correct all illegal commands, illegal operations and unsafe dynamics.

3. Shoulder the two functions of supervision and publicity and training, publicize and implement the laws and regulations of the state and the competent departments at higher levels on safety production and labor protection, and assist leaders to do a good job in safety production investigation.

5. Remind or dismiss serious violations of safety operation procedures according to the terms of reference and publicity documents.

and unqualified personnel in command of violations.

It should be, but there may not be much of a market. Nor will it be high. Because of this certificate, various companies will let their employees take the test.

Therefore, practitioners are strictly forbidden to be attached, so safety officers cannot be attached, and they must inspect the site.

You have to see what kind of certificate you have, and the safety officer can only be certified in the enterprise, and cannot be affiliated with other units.

Therefore, employees are strictly forbidden to resist, so the safety officer cannot resist and must patrol the site.

Summary. Hello dear, happy to answer your <>

According to the provisions of the "Work Safety Law", the personnel who have obtained the qualification certificate of registered safety engineer shall accept the employment of enterprises or institutions to engage in safety production management and technical services. Therefore, registered safety engineers cannot work in the form of "affiliation", and must be formally employed in enterprises or institutions to engage in work related to safety production management and technical services.

Can a registered safety engineer be attached?

Security Engineer, Can I Attach?

Hello dear, happy to answer your <>

According to the provisions of the "Work Safety Law", the personnel who have obtained the qualification certificate of registered safety engineer shall accept the employment of Bizao enterprises or institutions to engage in safety production management and technical services. Therefore, registered safety engineers are not as good as Xiangneng to work in the form of "affiliation", and must be formally employed in enterprises or institutions to engage in work related to safety production management and technical services.

At the same time, registered safety engineers should also comply with laws, regulations, norms and standards on production safety, perform safety production management duties, and ensure the safety production of enterprises or institutions. If you work in the form of "affiliation", you not only violate the provisions of relevant laws and regulations, but also cannot perform the safety production management responsibilities that you Zheng Haoshi should undertake for the safety engineering of the Shenshu Safety Project, which will bring greater risks to the safety production work of enterprises or Shenlead institutions. <>

Security engineer, how much is the risk?

Hello dear, happy to answer your <>

As a safety tube vibrillation manager of an enterprise or public institution, the safety engineer needs to assume the responsibilities and obligations of safety production management, so there are certain risks. It mainly includes the following aspects: Liability risk:

Safety engineers need to perform duties such as supervision and inspection, safety assessment, accident investigation, etc., and will bear corresponding responsibilities if the accident occurs due to negligence or inadequate management. Safety engineers are exposed to various safety risks in their work, such as hazardous chemicals, aerial work, machinery and equipment, etc., and need to take corresponding measures for safety protection.

There are also occupational risks: safety engineers need to work in environments such as offices and factory sites for a long time, and there are certain occupational health risks, such as noise, dust, radioactivity, etc. Legal Risks:

Safety engineers need to comply with safety production laws and regulations and relevant standards, and will bear corresponding legal responsibilities if they violate laws, regulations or standards. <>

In short, as a professional in the senior section of the safety production management group, the safety engineer needs to conscientiously perform his duties, strengthen safety protection, reduce risks, and ensure the production safety of enterprises or business units. <>

Safety engineer affiliation**: 3667-5000 yuan per year.

As far as the current affiliated fees of registered safety engineers are concerned, their affiliated fees have gradually approached other levels. Such as certified lawyers, certified public accountants, etc. Many people say that 2017 is the spring of registered safety engineers, so 2019 is still the same.

No matter what industry China is in, the importance of safety is obvious to all, and full-time safety grip management personnel must be registered safety engineers, and many enterprises tend to have experienced managers in management. With such a promising outlook for the industry, the demand for certified safety engineers is only going to grow.

In the future, whether in the construction industry or in the machinery industry, the importance of safety will definitely be more and more important, but the corresponding number of people engaged in safety work in the future will be more and more, for such a situation, the number of safety engineers will be more and more, so the future of the safety engineer affiliation cost will definitely appear a calm decline with a thick skin, so now if you have a safety engineer certificate in hand, now it is undoubtedly a very good choice to be affiliated.