Why is it that the microphone can hear itself and the software does not detect it?

First of all, take a look at your microphone connection? You can try both the front and the back, in addition, whether there is a problem with the other party's audio.

How to solve the problem of not detecting the microphone Hello dear, one: The microphone signal line is not inserted into the computer interface Many friends use the computer, like to plug in only the audio cable, so we can listen**, you can watch movies**, etc., but chat with each other**, the microphone is no sound, so it is generated, you can hear each other, the other party can not hear you speak. Two:

If the microphone is not turned on in the audio settings, the microphone function is generally turned on by default, but it is also possible that the user has set it or accidentally turned off the microphone, in which case it is not possible to use the microphone to overcome the stuffy wind. Solution: If you troubleshoot one, then check whether Wei turns on the microphone function, find the sound icon in the lower right corner of the computer desktop - right-click on it and select "Adjust Audio Properties" to enter the audio settings interface, adjust the audio properties, switch to the voice option, check whether there is a sound device and recording equipment, and check whether the corresponding sound is adjusted to the lowest, if there is no device, Ant Grip Guess should select the setting from the drop-down options, and increase the volume to the maximum.

How to solve the problem of not detecting the microphone, first see if the microphone cable is plugged in, the normal is to plug in the pink port. Then see if the microphone is muted. Right-click the small speaker in the lower right corner of the computer --- open the volume control, vertical --- options---properties---bottom) microphone volume (front" "If it still doesn't solve the problem, then test whether the microphone is normal.

Follow the steps below: Start --- program--- Accessories --- Entertainment --- Recorder, turn on the recorder, speak to the microphone, and click the red record button at the same time to see if you can record the sound (whether the green bar of the sound wave flashes up and down), if it is recorded, it means that the microphone is intact, if it can't be recorded, the sound card may be set incorrectly or the microphone connection is not right or the switch of the hidden liquid microphone is not turned on. I hope it can help you.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

The microphone may not be detected by the computer, and it may be that it is not properly connected or set up.

The microphone is connected to the pink jack, first of all, don't connect the wrong hole, if you connect it wrong, there will be no sound.

If the front microphone interface is not good, it should be that the microphone interface in front of the case is not connected correctly or not plugged in properly, try to plug it in and unplug it again, and use the back interface if it is okay.

If you can't do both, you can re-drive the device or uninstall the driver of the sound card and reinstall it.

You can also adjust the settings of the small speaker in the lower right corner Right-click Recording device Double-click the microphone or dot attribute In the level, you can adjust the volume of the microphone and the microphone enhancement (this is appropriately adjusted, turn it up, some computers will have current sound) Select noise suppression and echo cancellation in the enhancement, and select this device in the listening system, you can hear your own voice (this normal use is not selected, some computers will be stuck or noisy).