-
Please check whether the data cable of the hard disk is connected correctly. If the data cable is damaged or poorly connected, it can cause the hard drive to not work properly. In order to avoid loss of important data from hard drive, you may need to use professional hard drive repair software or data recovery software to solve the problem.
The specific steps are as follows:
Please note that the location of the software installation and the location of the deleted files cannot be the same to avoid overwriting the lost files.
Step 1: First of all, you need to open the data recovery software and select the recovery mode.
Step 2: Next, select the object to be scanned, such as a USB flash drive, and click on the "Start Scan" button.
<>Step 4: Finally, click on the "Recover" option and open the file when it is successful.
Please note that when using a portable hard drive, it is recommended to back up important data regularly and avoid unplugging the portable hard drive during data transfer to prevent data loss or corruption.
-
Plug the USB drive into the computer, fix it with the computer's program, and give it a try. A lot of antiviruses should have this feature.
-
First, use the chip wizard or similar software to find the main control model of the USB flash drive. 2. Find the mass production tool corresponding to the USB flash drive according to the main control model. 3. Insert the USB flash drive into the computer and run the mass production tool
-
It can be recovered using a USB flash drive tool.
Take the Chinese cabbage U disk system as an example to illustrate the process:
1. Install the Chinese cabbage U disk system on the computer and open the divination program.
2. Insert the USB flash drive into the computer.
3. Select the USB flash drive in the figure. Select Initialize USB flash drive to recover.
Using the software used to make the CD drive, find the "Return Disk" and other similar functions to recover the USB flash drive.
-
It's so black that I can't even move my mouse.
-
The prompt in the figure is that this has nothing to do with the driver, it is the file folder corruption, the specific reason to be measured, if the other file folder is good, the most likely situation is that the flash particles are caused by bad blocks, objectively speaking, the probability of perfect recovery is not large, but it is definitely possible to recover some file fragments, if the file is very important, it is not recommended to toss it yourself, find a reliable data recovery store to try.
-
If you look at how to fix the driver abnormality, you may need to go to the computer to fix it, and he may remind you that there is an abnormality in your USB flash drive, and then let you fix it.
-
The hardware is damaged or you lock the USB flash drive, which can only be extracted by opening the disk, and there is no other way.
-
Behind the Mpemba phenomenon, a cup of cold water and a cup of hot water are placed in the freezer compartment of the refrigerator at the same time, which glass of water freezes first? "Of course the cold water froze first! I believe that many people will not hesitate to make such an answer.
Unfortunately, this answer is wrong. The mistake was discovered by Mpemba, a junior high school student at Magamba Middle School in Tanzania, Africa. One day in 1963, Mpemba found that the hot milk he kept in the freezer of his refrigerator froze before the cold milk of his classmates.
This puzzled him, so he immediately ran to the teacher and asked for advice. The teacher said easily, "You must be mistaken, Mpamba."
Unconvinced, Mpemba tried again, but the hot milk froze before the cold milk. One day, Dr. Osborn, Head of the Department of Physics at the University of Dar es Salaam, visited Mpemba's school. Mpemba mustered up the courage to ask the doctor his question.
Dr. Osborne replied, "I can't answer your question right away, but I promise to do it myself as soon as I get back to Dar es Salaam." As a result, the doctor's experiment was exactly what Mpemba said.
As a result, this phenomenon is known as the "Mpemba phenomenon". For more than 40 years, the "Mpemba phenomenon" has been recognized as truth to this day. It doesn't end there.
In 2004, Yu Shunxi, a girl from Xiangming Middle School in Shanghai, questioned this phenomenon. Under the guidance of Huang Zengxin, a famous science and technology teacher, Yu Shunxi and two other female students began to study the Mpemba phenomenon. They use sugar, water, milk, starch, ice cream and other ingredients to collect.
-
If the hard drive is broken, there is generally no way to repair it directly, if it can still be recognized, it is also necessary to save the data in time, and if it is still under warranty, take it to the place where it was purchased for warranty.
-
Hello, I have seen your question and am sorting out the answer, please wait a while
1.First of all, you need to open the "This PC" window, and find the disk partition in the tab that is ready to be scanned and repaired. 2.
Then right-click on the partition and select the "Properties" menu item in the pop-up menu. 3.At this time, the properties window of the partition will open, click on the "Tools" tab above.
4.In the tool window that opens, in the tab that comes out we can click on the "Check" button.
-
1.The reason why the USB flash drive cannot be read.
The USB flash drive may be unreadable during use. This situation is usually caused by a corrupted USB flash drive or a problem with the file system. The reason for the damage of the USB flash drive may be wear and tear caused by long-term use, power failure or writing data to the USB flash drive during power failure, etc.
2.Use the Disk Detection and Repair tool.
Before repairing the USB flash drive, we need to use the disk detection and repair tool to diagnose the degree of USB flash drive damage. For Windows systems, you can use the built-in disk detection and repair tool. How:
Right-click on the USB flash drive and select "Properties" - > Tools - >Check".
3.Use the command line to repair the USB flash drive.
If the USB flash drive is still unreadable, we can use a command line repair tool. Specific operation: Open the command prompt (administrator permission), enter "chkdsk f r", which is the drive letter where the USB flash drive is located, and press enter to start the repair.
4.Use the third party tool to repair the USB flash drive.
If none of the above methods can repair the USB flash drive, we can use third-party tools such as Recuva, DiskGenius, etc. These tools can scan the USB flash drive and locate the files. If we don't need important sensitive files, we can choose to format the USB flash drive and rewrite the data.
5.How to avoid USB flash drive damage.
In order to avoid USB flash drive damage, we need to pay attention to the following points:
Do not forcibly unplug the USB flash drive when you pull it out, you should "safely delete" it first.
Do not plug in the USB flash drive for a long time, and try to avoid writing data for a long time.
Do not leave the USB flash drive in a humid or high-temperature environment.
Conclusion. A well-maintained USB flash drive can avoid data loss and corruption. If the USB flash drive cannot be read, you can use the built-in disk detection and repair tool or a third-party tool to fix it.
-
If our USB flash drive is damaged, it will lead to the inability to recognize the USB flash drive device, but many users may not know how to fix the USB flash drive damage, in fact, if it is only the driver is damaged, then Chi Bi only needs to reinstall the driver, let's take a look at it.
How to fix USB flash drive damage:
1. First of all, the USB flash drive is definitely one of the reasons.
2. Go to Computer Management and find "Device Manager" below
3. Universal serial bus controller, if your driver is damaged, then there will be a device with an exclamation mark.
4. Right-click to select it and click "Update Driver Code Notification Program".
5. After opening the dialog box, click "Browse my computer for drivers".
6. Then type "C: Windows System32 DriverStore" in it, remember to check "Include subfolders".
7. Finally, click "Next", and the system will automatically scan and repair the USB flash drive for us.
Conditions for making a driver restorer: A USB flash drive of 4GB or more. >>>More
When using USB flash drive or other disks, a prompt box will appear that the disk is not formatted, and if you format it, the data will be lost. The USB flash drive prompt is not formatted, in fact, the DBR of the disk is damaged, and now it can be repaired with a tool WinHEX without formatting. The reason why the disk is not formatted is because the DBR of the disk is damaged, and each disk will generate a DBR and a backup DBR after formatting, both of which are the same, and can be restored with the backup DBR when the DBR is damaged. >>>More
Maybe you make a modulation error The above picture is coming, I'll help you look at the debugging **Wrong, give you guidance, you just open the settings, don't click on the others.
This one. I'm afraid it's not a big deal. Can it be engraved into a disc?
It can be repaired, but you need your USB flash drive model, and the corresponding mass production tool can be restored to its original capacity by flashing its own firmware. It is also possible to use other software, such as mydisktest >>>More