How to use Haier Wave Wheel automatic washing machine?

1.Open the faucet valve first, for automatic washing machines, generally with a water level monitoring device, in the absence of water can not be opened, and then connect the washing machine plug to the power supply, the washing machine is best to use a socket with a switch to avoid long-term power on the machine.

2.Put the clothes into the washing machine, pay attention to the total weight should not exceed the weight of the washing machine model, and then turn on the power button of the washing machine, choose different washing methods according to the material of the clothes, and turn the program button.

3.It must be the first choice of the program in the selection of the amount of water, otherwise the amount of water will change, the amount of water adjustment and the program is the same, it is also a cycle selection, after selecting the amount of water and the program, press the start pause button to observe whether it is operating normally.

Put the laundry in the washing machine, put in the laundry detergent, and close the lid. Select a program and press the start button.

How to use Haier Wave Wheel automatic washing machine:

1.Plug in the power plug, put down or connect the drain pipe, turn on the tap of the water, put the laundry, washing powder and additives (softener, bleach, etc.) into the washing machine, and close the cover;

2.Press the power switch, select the water level according to the amount of laundry to be washed, and select the program according to the specific conditions such as the dirty stroke and material of the laundry;

3.Press the "Start Pause" button and the washing machine starts working;

4.When the selected program finishes working, the buzzer will beep;

5.When the work is finished, turn off the power switch and unplug the power plug from the socket, turn off the tap and then open the cover, take out the laundry, clean the wire chip filter bag, and wipe the washing machine dry.

The automatic washing machine is to pre-set n programs for the whole process of laundry (soaking-washing-rinsing-dehydration), select one of the programs when washing, turn on the faucet and start the washing machine switch, the whole process of laundry will be automatically completed, and the buzzer will sound when the laundry is completed.

The washing process of the washing machine is mainly to pull the dirt into the water to achieve the purpose of washing under the mechanical action of mechanical action such as infiltration and scouring generated by machinery and the wetting and dispersion of detergent.

Here's how to use the Haier Wave Wheel automatic washing machine:

Preparation: Sort the clothes to be washed into the washing machine according to the material and color, turn on the water tap and check whether the water supply is normal.

Add detergent: You need to add an appropriate amount of detergent according to the detergent instructions, and generally use it according to the quantity, material and degree of dirtiness of the clothes. Be careful not to overdo it, otherwise it will produce too thick foam.

Choose a laundry program: Choose a laundry program based on your actual washing needs, such as separate dehydration, laundry cleaning, underwear care, etc.

Adjust cleaning parameters: Depending on your preference or washing needs, additional adjustments can be made, such as time presets, temperature adjustments, water level or speed settings, etc.

Start the washing machine: After confirming all the options, plug the plug into the power outlet, press the start button to turn the washing machine on, and then press the "Start Pause" button to start the scrubber running.

After washing: After washing, you need to manually turn off the plug and remove the washed laundry. Check the inside of the washing machine again to prevent any remaining smudges or foam. At the same time, it is necessary to turn off the water source faucet in time, and clean the filter and drain outlet.

It should be noted that the specific operation details may vary and should be carried out according to the actual instructions for use. At the same time, only after understanding and mastering the correct use method can the Haier Wave Wheel automatic washing machine be operated safely and effectively.

The specific operation and use of the automatic washing machine is as follows:

1.Place the washing machine on a solid and flat ground, adjust and install it, connect the water inlet hose with the faucet and the washing machine water inlet, open the faucet, remove the drain pipe and insert the pipe head into the floor drain.

2.Plug in the power plug, put down or connect the drain pipe, turn on the faucet, and put it on.

Wash laundry, laundry detergent and additives (softeners, bleach, etc.) into the washing machine and close the lid;

3.Press the power switch, select the water level according to the amount of laundry to be washed, and select the program according to the specific conditions such as the dirty stroke and material of the laundry;

4.Press the "Start Pause" button and the washing machine starts working;

5.When the selected program finishes working, the buzzer will beep;

6.When you're done working, turn off the power switch, take out the laundry, clean the crumb filter bag, and wipe the washing machine dry.

The following points must be paid attention to during use:

1) When the "Wash" or "Rinse" program is selected, the roller will not run until the selected water level is reached;

2) During the dehydration procedure, the cover must be closed, and the lid should not be opened from time to time, 3) Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger;

4) Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents;

5) When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem has not been solved after 2 corrections, it will stop and alarm, at this time, the cover should be opened, put the clothes on the side evenly, and then close the cover, press the "start pause" button;

6) When using hot water washing, do not use more than 50 hot water, and pay attention not to splash the water on the control board, so as to avoid the internal electrical parts due to water and cause burning.

7) Before washing, check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, take them all out; Kai Chen.

8) When the temperature is very low, the washing machine is easy to freeze, at this time, pour warm water below 50 to soak for a period of time, stare at the core meditation room, and wait for thawing before use;

9) When the water temperature is low, the laundry detergent is not easy to dissolve, at this time, you need to dissolve it with a small amount of warm water (about 30) before pouring it into the washing machine.

1.Open the washing machine door and put your clothes in the washing machine. 2.

Choose the right washing program and water level according to the type and quantity of laundry. You can refer to the use of washing machines to say macro eggplant book. 3.

Add detergent. According to the requirements of the washing program, add an appropriate amount of detergent. 4.

Close the washing machine door, press the power switch, select pants and discuss the washing program. 5.Start washing.

The washing machine automatically completes the steps of washing, rinsing, dehydrating, etc. 6.When the washing is complete, open the washing machine door and remove the laundry.

7.Clean the washing machine. Clean the inside and outside of the washing machine to maintain the hygiene and longevity of the washing machine.

Pay attention to the things that must be touched: 1Do not overload the washing machine, so as not to affect the washing effect and the life of the washing machine.

2.Choose the right washing program and water level so that water and electricity are not wasted. 3.

Use a suitable detergent to avoid damage to your clothes and washing machine. 4.Clean the washing machine regularly to maintain the hygiene and longevity of the washing machine.

Plug in the power, unscrew the faucet, and place the drain next to the floor drain for easy drainage.

Press the power button first, turn on the power, put the clothes in, and <>

Set it in order, wash the button, press it, adjust the washing time, generally I adjust it for more than 10 minutes, and you can adjust it for a few more minutes when there are many clothes.

Rinse, just rinse twice, the red light stays at 2.

The water level, divided into grades, and if there are fewer clothes, you can adjust it to 2, and if you have more, you can adjust it to 7.

All that's left is to press start, and the water will be poured slowly, don't forget to put laundry detergent.

The last thing is dehydration, just set it for a few minutes, <>

After that, it will automatically stop, **remind, and cut off the power by itself.

There is also a drying function, and the clothes are in a hurry to use, so you can set it for a few minutes and dry.

The usage of Haier washing machines is as follows:Tools Materials: Haier drum washing machine, laundry detergent, disinfectant.

1. First connect the socket of the drum washing machine.

2. Then open the laundry detergent addition box of the drum washing machine.

3. After that, pour laundry detergent into the main sink of the laundry detergent addition box.

4. Then pour disinfectant into the disinfection tank of the laundry detergent box.

5. Then close the detergent box of the drum washing machine.

6. Secondly, on the panel of the drum washing machine, click the "Start Adding Clothes" button.

7. Finally, the drum washing machine starts to clean.

Hello, dear, how to use Haier Wave Wheel automatic washing machine, open the washing machine, put in the clothes to be washed, and then pour in an appropriate amount of laundry detergent; Connect the water inlet pipe, turn on the faucet, and then turn on the power; Press the power button, turn it on, and then choose the appropriate amount of water according to the number of clothes to be washed; In terms of program, select Commonly used, and then press the start button under the megagraph, so that the washing machine will start running, and an audible prompt will be issued after cleaning.

1. When using Haier automatic washing machine to wash clothes, first turn on the power supply, and at the same time put the clothes in the washing machine, connect the water inlet pipe and power supply of the washing machine, and turn on the faucet.

2. Pour an appropriate amount of laundry detergent and laundry detergent into the washing machine, the dosage of detergent should be determined according to the amount of clothes and the degree of cleanliness.

3. Before laundry, you should choose the corresponding washing program, the washing program of different clothes is different, and the general clothes can choose the standard washing program.

4. After the washing program is selected, you should also select the corresponding washing times and dehydration times, the bending time of the washing button, etc., and then press the start button after all the programs are selected, and the washing machine will start to work.

5. Some washing machines also have the function of predetermined time, when using this function, you can prepare the work first, and after setting the program, the washing machine will work at the time you set.

6. When the laundry is finished, the washing machine will beep to remind you that the clothes have been cleaned and ready to dry. Bright and respectful.