Tella notebook boot prompt strike the F1 key to continue, etc

This issue occurs because of a setup issue.

The solution and detailed operation steps are as follows:

1. In the first step, restart the computer, then press the F2 key to enter the BIOS interface of the computer, as shown in the figure below, and then enter the next step.

2. Secondly, after completing the above steps, select the last option "exit" option in the menu bar as shown in the image below, and then proceed to the next step.

3. Then, after completing the above steps, select the item "Get Default Values" in the interface, as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, press the Enter key to confirm, a prompt window will pop up on the interface, click the "yes" option as shown in the image below, and then enter the next step.

5. Subsequently, after completing the above steps, select the "Exit Setup" option as shown in the image below, and proceed to the next step.

6. Finally, after completing the above steps, a dialog box appears, click "yes", as shown in the figure below. This way, the computer will automatically restart and then the problem is solved.

The computer needs to press F1 and F2 to enter the system when it is turned on, which is caused by the following reasons:

First: It may be that the computer is set up to boot the floppy drive, but there is a problem with the floppy drive. The solution is as follows.

Press del to enter the BIOS at boot, boot up the boot sequence, and turn off the floppy drive to boot. Turn off the power-on floppy drive detection function: Start the computer, and then press the [DEL] button to enter the main interface of BIOS settings; Select the "Advanced BIOS Features" setting item and press the Enter key to enter; Set "Boot Up Floppy Seek" to "disabled" to turn off boot software detection.

Second: It may be that the motherboard battery of the computer Shili Lu is broken. The solution is as follows.

Replace the motherboard battery.

Thirdly, it may be that there is a problem with the computer's memory or the CPU frequency has been changed. The solution is as follows.

Replace the memory and restore the BIOS defaults.

Fourth: It may be that the computer's system is malfunctioning. The solution is as follows.

Refer to the installation tutorial of W7 Ultimate Edition, reinstall the system, and all problems will be solved.

Fifth: There may be a problem with your computer's hard drive. The solution is as follows.

Detect the bad sectors of the hard disk, shield the bad sectors, or replace the hard disk directly.

Summary. Dear, hello, I'm glad to provide you with an answer, the computer needs to press F1 and F2 to enter the system when it starts up is caused by the following reasons: 1. The main thing is that the computer motherboard battery is useless, and the solution: change the motherboard battery.

When the Dell computer is booted, the F1 key to continue, F2 to Run, appears

Dear, hello hungry, I am happy to provide you with an answer, the computer boot needs to press F1 and F2 to enter the system is caused by the following reasons: 1, the main reason is that the computer motherboard battery is not rotten mold hungry code sleepy, solution: change the motherboard battery.

2. The floppy drive is set to start, but there is a problem with the floppy drive. Solution: Press del to enter the stare and BIOS at boot, boot up the boot sequence, and turn off the floppy drive to boot.

Turn off the floppy drive detection function: start the computer, and then press the [DEL] key to enter the main interface of BIOS settings; Select the "Advanced BIOS Features" setting item and press the Enter key to enter; Set "Boot Up Floppy Seek" to "disabled" to turn off boot software detection.

3. There is a problem with the hard disk. Solution: Detect the bad sectors of the hard disk, shield the bad sectors, or replace the hard disk directly.

4. If there is a problem with the memory or the CPU frequency is changed, you can replace the memory and restore the default value of the BIOS.

5、If the cherry is blocked by the computer system failure,Refer to the installation tutorial of the W7 flagship version of the test to reinstall the system, and all problems will be solved。

I have encountered 2 such faults: Dell 14-N4030 notebook boot prompt strike the f1 key to countinue, f2 to run the, the battery cannot be recognized when detecting the fault when it is working normally, prompt not charging, troubleshoot after replacing the new battery.

Hello! strike the f1 key to continue,f2 to run the setup utility

This prompt is the result, you didn't send the previous problem cause prompt in English.

Press F1 directly to enter the system, and F2 is to enter the BIOS.

Hello! Press F12 when booting up, and then select the option starting with D to run Dell's built-in hardware detection program to detect whether there is a problem with the hardware.

That's the boss menu, F10 recovery, and that's it.