How to hit the direction of the rear of the car to the left when the car is moving

When reversing, the front of the car deviates to the left, indicating that the rear of the car is deviated to the right, so the rear of the car should be to the left and the steering wheel should be left to play.

Hit left to the left, right to right, forward or backward. When it deviates to one side, it must be corrected to the other side. If the body is on the left, it must be moved to the right, and the steering wheel is on the right; Otherwise the opposite is true; It doesn't matter if it's going forward or backward.

First, the direction of progress should pay attention to the following two points:

1. When moving forward, the direction is to the left, and the front of the car is to the left; Hit the right in the direction and the front of the car to the right - the direction is the same as reversing.

2. When correcting, when the front of the car is deviated to one side, it is also known that it is correct to the other side, (the body is biased to the left, it must be moved to the right, and the steering wheel is right.) Otherwise, on the contrary, when you find that you are still biased to this side, you always think that you are back (repairing) wrong - in fact, it is true, only when the direction is back (repaired), continue to play the direction to the other side to change the direction of the front of the car, and not returning to the direction of the front can only reduce the amplitude of the front deviation.

Second, the reverse direction should pay attention to the following two points:

1. When reversing, the direction is to the left, the rear of the car is to the left, the direction is to the right, and the rear of the car is to the right - the direction is the same as the forward.

2. When correcting, when the rear of the car is deviated to one side, it is also known to return (repair) to the other side, (the body is biased to the left, it must be moved to the right, and the steering wheel is right.) Otherwise, on the contrary, when you find that you are still going to this side, you always think that you are back (repairing) wrong - in fact, it is true, only when the direction is back (repaired), continue to play the direction to the other side to change the direction of the rear of the car, and not returning to the direction of the front can only reduce the amplitude of the rear deflection.

3. It should be mastered when making amendments.

Slow driving, fast steering"How to do it. The reversing speed should be controlled within 5km h. In reversing, if it is necessary to move forward or backward repeatedly due to the terrain or the steering angle of the steering wheel, the vehicle should be quickly used to move and turn the steering wheel at the moment before each backward or forward approaching the stop, so as to prepare for steering again forward or backward, and should not forcefully turn the steering wheel after the vehicle has stopped.

The specific approach depends on the actual situation. Place your hand in the direction of 12 o'clock and you want to adjust the words:

1) If the body is too big, hit 90 degrees, that is to say, to the left to the 9 o'clock position, to the right to the 3 o'clock position.

Second, if the body is not too big, as long as it is about 45 degrees.

1. The direction of correction is correct;

2, the correction of the action to be neat (don't the steering wheel left and right repair and repair not in place, can only make yourself nervous, waste time), the most important thing in the later stage is to reverse the two actions of the warehouse to do a good job, then there is no need to repair, as soon as possible to understand the truth, more practice on the line, and one point is to do the clutch control well, a slow speed, the correction time is sufficient, otherwise in a hurry, no matter how good the action is deformed.

First of all, the front of the car is tilted to the left, and the steering wheel is of course to the right, and then to the left, to turn the car back to the right.

Question added: I think the front of the car is deviated to the left, and the steering wheel is hit to the right, so it's right, why is there still a turn.

Try it yourself, ride a bicycle and you have to return to the right after you turn left, and then you unconsciously return to the right on your own, but you sit on a closed car and your vision is not very good. If you drive for a long time, you will have such an awareness. At a speed of 9100 per hour on the highway, if you are still thinking about this question, it is very dangerous, how many miles do you have to run in a second?

The wall is up in the morning!!

Not necessarily. Theoretically, when the vehicle turns 90 degrees, it generally only needs to pass 1 2 as long as the body passes, and the rear of the car can be passed. But actually, we're fightingSteering wheelAnd when visually inspected, it is generatedTime differenceTarget.

It is often the case that the body looks halfway through, but the angle of our steering wheel is not properly laid, and if the body is not halfway through, the angle of the steering wheel is hit to the maximum angle of steering too early, which will cause the right side of the body to get stuck in the corner where it is going to turn.

Although there are many types of vehicles, the structure is similar. This should be said to be the credit of standardization, but also the need for large-scale production lines. With the development of society, the progress of science and technology and the change of demand, the shape of railway vehicles has begun to change, especially the passenger car is no longer the same old face.

However, their basic structure has not changed significantly, but the specific parts have a more scientific and advanced structural design.

Generally speaking, the basic structure of the vehicle is composed of five parts: the car body, the undercarriage, the running part, the coupler buffer device and the braking device.

The body is the part of the vehicle that is used to load goods or passengers, and is the basis for the installation and connection of other components of the vehicle. The body of the early vehicles was mainly made of wood, supplemented by steel plates, bow rods, etc. In modern times, the car body is mainly steel structure or light metal structure.

When reversing, the steering wheel hits the left, the rear of the car will be left, and the steering wheel will be right, and the rear of the car will be right, so it is necessary to clarify the concept of the lower steering wheel.

When the rear of the car is deviated to a certain side, the steering wheel should be played in the opposite direction (how much is off), that is to say, when the body is on the left, you need to hit the steering wheel to the right to return to the right. Drive the car forward to a position roughly flush with the car in front of the parking space, about one meter apart laterally, adjust the angle of the right rearview mirror, and lower as much as possible until you can see the right wheel. Then I started reversing in the direction of the right full lane.

The specific steps are as follows:

1. When the vehicle runs to the lower edge of the left rearview mirror and touches the control line, the steering wheel is killed to the right;

2. Look at the left rearview mirror after hitting the direction to the right, and see the direction of the library angle back to the right when it appears from the left rearview mirror;

3. After the direction returns to the right, retreat to the left front door when the handle is pressed on the left library line, and then the steering wheel is killed to the right;

4. When you see the left bottom bank corner, the steering wheel returns to the right;

5. Wait for the body to be vertically parallel and straightened the body to reverse into storage;

6, after adjusting the body to look at the left rearview mirror, when the left rearview mirror shell under the edge of the front line of the library, the rear distance of 30cm, at this time to stop the car.

Hello, as long as it is not a trailer, the rear of the car will be directed to the right, and the rear of the car will be directed to the left.

When the front of the vehicle is tilted to the left, the steering wheel is turned to the left. If you are reversing, you need to turn the steering wheel to the right.

Whether the car is moving forward or reversing, the steering wheel and the direction of the car are the same, that is, the steering wheel hits the left, and the car moves to the left, and vice versa.

When reversing, the steering wheel to the left, the rear of the car to the left, the front of the car will be slightly to the right, from the rearview mirror to observe, the rear of the car needs to go in which direction, to which direction to hit the steering wheel, in reversing before and after the need to carefully observe, be careful of the rear of the garage, the front of the car touched.

First of all, the posture of holding the steering wheel should be held with both hands in the position of "9 o'clock 1 quarter", when turning the steering wheel, the two hands do not let go, you can turn 180 degrees to both sides, such a steering amplitude, in most cases, is enough.

How to learn to play the steering wheel and the correct posture:

1. Keep your body upright and actively turn, leaning on the back of the chair to backlight. At this point, the seat height can be adjusted back and forth to the correct state.

2. Look straight ahead, hold the steering wheel on the left side, hold the right hand above the steering wheel and relax the hands and hang down naturally, at this time, the thumbs of the left hand and the right hand should naturally be directly facing the upper part of the steering wheel, and the remaining four fingers should be held lightly from the outside to the inside.

3. The movements in the hands should be balanced with each other to avoid unnecessary shaking. If the steering wheel is affected by the uneven road surface, and the front wheel deflection impact vibration, the steering wheel should be tightly gripped, so that the vibration of the steering wheel of the vehicle rotates violently when the injured finger or wrist, when the left front (right) deviation, should be corrected to the right (left) direction, run back to the front line when you run back, and then gradually return the steering wheel to the right, then the correction should be directly deducted during the correction direction rarely come back to play, easy to make a lot of people staring at the problem in front of them, again before the obvious skew correction direction, at this time most of the late.

When the steering wheel is turned to the right, the rear of the car is reversed to the right, and if the rear of the car wants to be reversed to the left, the steering wheel can be turned to the left.

During the driving of the car, it is not possible to use one-handed operation for a long time unless the operation requires. Do not use too much force when turning the steering wheel, do not turn the steering wheel after the car is stopped, and when driving on bumpy roads, you need to hold the steering wheel firmly with both hands to avoid traffic accidents caused by accidents on the steering wheel.

1. First of all, in the process of driving, the steering wheel should be held steady, and do not easily change the direction when driving, as shown in the following figure

2. When driving in a straight line, the line of sight should be far away, and at the same time, the afterglow should be used to take into account the near front of the car, the rearview mirror, and pay attention to the vehicles on the left and right.

3. When the speed of the car is relatively fast, once the car in front of you knows any emergency, because the line of sight is far enough, it will be too late to slow down and take emergency measures.

4. In the process of driving in a straight line, the ridge line on the left side of the front cover can be used as the standard;

5. When you find that the car is mistracked, you can fine-tune it in the direction of the deviation.