What glue should be used to glue glass and iron, and can glass glue stick iron?

Structural adhesives have the characteristics of high strength, peel resistance, impact resistance, etc., and can be used for bonding between metals, plastics, ceramics and other materials of the same or different kinds. It can partially replace traditional connection forms such as welding and riveting, so it can definitely be used to glue iron. However, it still depends on the specific situation, if it is only a small area of iron sheets, if you want to bond quickly, you can also use some metal instant adhesive.

As a well-known adhesive manufacturer, 3M's structural adhesives are also subdivided into many different types according to their use and characteristics, with strong viscosity, fast speed, and wide range of applications, which are worth choosing.

Glass and iron can be glued with HY-106AB glue or HY-129 glue.

HY-106AB high-temperature metal glue is mainly used for bonding and bonding glue between various metal products such as iron, aluminum, copper and other metal materials that require high temperature resistance.

HY-129 silica gel adhesive metal glue is a one-component silica gel adhesive, fast curing, the product has high modulus, high and low temperature resistance, and excellent anti-ultraviolet and anti-aging properties, is a good choice for silica gel and silica gel, stainless steel and silica gel, silica gel and metal and other silica gel products to adhere to the curing at room temperature.

Bonded between glass and iron, bonded with YH-T828-1 silicone, non-whitish, soft, elastic.

Easy-to-fit adhesives.

The glass glue is not strong because the iron will rust, and the glass glue may crack after a long time.

Glass glue is divided into two types according to its performance: neutral glass glue and acid glass glue. It is generally used for home improvement bonding.

The places where glass glue is generally used in home decoration are: the dumb place on the back of the wood line, sanitary ware, toilet, makeup mirror in the bathroom, the gap between the sink and the wall, etc., these places should use glass glue with different properties.

The adhesive of neutral glass adhesive is relatively weak, and it is generally used on the back of the bathroom mirror where there is no strong adhesion. Neutral glass glue is used more in home decoration, mainly because it does not corrode objects, while acid glass glue is generally used in the dumb part of the back of the wood line, and the adhesion is very strong.

1. JL-498 metal instant glue of poly glue.

Small area of iron sheets, a few square centimeters, or even only the size of a grain of rice, the bonding of such a small iron sheet, the selection of metal adhesive is very important to be able to control the amount of dispensing, especially the area is very small, if you can not control the amount of dispensing, glue overflow, will have a great impact on the bonding effect, the use of polyglue JL-498 metal instant glue, 5-8 seconds to complete the positioning, 30 minutes to achieve the use of strength, the smaller the bonding area, the higher the strength, low viscosity, The amount of dispensing can be well controlled by using a PE dropper or needle.

2. AB glue in polyglue metal adhesive.

For a relatively large area of iron sheets, if only the bonding strength is considered, the AB glue in the polyglue metal adhesive is a good choice, AB glue can be divided into epoxy resin AB glue and acrylic AB glue, some strength can achieve the effect of cold welding, after curing are hard, insulation, sealing effect is also good, the cured object has a good acid and alkali resistance, salt spray resistance, solvent resistance, waterproof, oil resistance and other properties. However, the impact and vibration resistance of acrylic AB glue is better than that of epoxy AB glue.

There is also a big difference in the positioning time of the two kinds of AB glue, the positioning time of epoxy resin AB glue is very fine, the fast positioning time is 5 minutes, the slow positioning time reaches 2 hours, and the positioning time of acrylic AB glue is mostly 3-5 minutes. Therefore, AB glue can be adapted to most iron sheet bonding processes.

3. JL-6218 metal adhesive with soft adhesive film after curing.

Iron sheets need to be bent after bonding. At this time, it is necessary to use JL-6218 metal adhesive with soft curing adhesive film, this metal adhesive has a relatively high consistency, good initial adhesion, and will not fall off immediately after applying the glue, the initial curing time is 5-8 minutes, and the curing film is soft, elastic, and has good impact resistance and vibration resistance.

Glass glue can be glued! But it is best to have a strong AB glue and a long life, it may be that your car is black or they use black glass glue in an inconspicuous place, or it is perfunctory. Because glass glue has a corrosive effect on metal, if it is acidic, it may cause the metal finish paint to peel off and degum!

Neutral glass glue has little effect...

Glass glue is perfectly OK and is the most correct choice. The windshield of the car is completely installed by glass glue, who sees the windshield of the car fall off. On the contrary, other glues (such as AB glue) are more likely to have problems (fall off) due to poor deformation adaptability and poor vibration resistance.

Don't fool people if you don't understand, mislead people's children!!

It is best to bond with all-purpose adhesive. The strength of the glass adhesive bond is very poor.