What is the difference between a vertical band saw and a horizontal band saw?

The horizontal band sawing machine saw band is transverse sawing, such as scissors and double columns, and the vertical band sawing machine saw band is vertical sawing, and the small vertical sawing machine saw band is relatively thin, with a width of 6mm, 8mm, can be sawn aluminum, wood, rubber, etc., and can be used for jig sawing. The sawing size of the scissor sawing machine is based on the material, such as 712, 916, 330, etc., such as 712, 712, and the cutting capacity is high 7"Width 12"But if the cutting material 12"When it is wide, the height of the material can only be about 65 mm. There is no restriction on the double-column type, because the sawing frame is vertically lifted, which is generally a hydraulic device, but the tightness of the saw band will affect the verticality of the cutting material.

It is the distinction between vertical saws and horizontal saws.

The band saw machine is a machine tool that uses a numerical control band saw blade with annular unended teeth to be tensioned on two rotating saw wheels, so that it can move continuously in one direction to realize sawing wood. It is mainly used in the preparation process of lumber workshop and woodworking workshop.

Classification of bandsaw machines:

According to the arrangement of the saw wheel, it is divided into two types: vertical band saw machine and horizontal band saw machine. The vertical band saw machine is divided into left type and right type.

According to the structure, it is divided into: sports car band saw machine, desktop band saw machine, and multi-belt saw machine.

According to the process requirements, it is divided into: log band sawing machine, replaning band saw machine, and blockery band saw machine.

Classification according to process: (1) log band sawing machine (vertical and horizontal), feed mode: sports car feed (longitudinal feed and transverse feed).

Re-cutting band saw machine (vertical and horizontal), feed method: manual or mechanical.

Features of the band saw machine.

Advantages: CNC band saw blade is thin, narrow saw path and low loss of wood;

Because it is a document, the logs can be selectively sawn, which improves the quality of the talents.

The CNC band saw blade is a one-way continuous movement, which is easy to increase for cutting speed.

Shortcoming. The CNC band saw blade is thin and easy to vibrate, which affects the surface quality of the finished product; high technical level for workers; Low productivity.

The structure of the band saw machine.

Vertical log band sawing machine:

The diameter of the saw wheel of the log band saw machine is generally more than 1m, and most of them are vertical structures. For the use of bandsaw machine in the workshop layout can be divided into left and right type.

Main components: mainly composed of two parts: the main engine and the sports car. The main engine that completes the main motion and the sports car that clamps the log and completes the feed movement. Some saws are also equipped with timber loading, timber turning and transport devices.

Bandsaw sports car.

The sports car mainly realizes the longitudinal feed and transverse feed of the workpiece, and the fixed and turning of logs.

The main components: frame, car building, lateral feed device, longitudinal walking device, automatic evasion device, on-board return device, wheels and tracks, etc.

Horizontal bandsaw machine.

Horizontal band sawing machines are used for log sawing, but most of them belong to board resawing. Especially in the processing of plate skin, it takes the sawing plane as the datum, the sawing is stable, and the processing is high.

Joinery bandsaw machine.

Joinery band saws are mainly used to cut curves, straight lines and inclined planes of less than 40 degrees of panels. It is widely used in furniture and other processes. This kind of machine tool has a simple mechanism and mostly uses manual feeding.

The joinery band saw machine is generally composed of a bed, an upper and lower saw wheel, an upper saw wheel lifting and tilting device, an upper saw wheel tightening device, a workbench and its tilting mechanism. Compose.

Hello, it is a pleasure to answer your questions, we have found the answer for you, vertical band sawing machine is a common metal cutting equipment, mainly used to process various types and shapes of metal materials. The following is how to use the vertical band sawing machine:1

Preparation: First of all, you need to check whether the various parts of the vertical band sawing machine are intact, such as the drive train field, guide rails, fixtures, etc. Then it is necessary to select the appropriate saw blade according to the metal material to be processed, adjust and install it.

2.Adjust cutting parameters: According to the type and size of the metal material to be processed, you need to adjust the cutting speed, feed rate, saw blade tension and other parameters of the vertical band sawing machine.

These parameters affect the cutting effect and the life of the equipment, and need to be adjusted according to the actual situation. 3.Mounting Fixture:

The metal material to be machined is placed on the fixture and clamped by means of screws or handles. Make sure the clamp is firm and reliable to avoid displacement or deformation during the cutting process. 4.

Start cutting: Start the vertical band saw machine and let the saw blade rotate. The workpiece is then slowly pushed in the direction of the saw blade, taking care to maintain stability and avoid overfeeding.

During the cutting process, it is necessary to pay attention to observe whether the cutting line is normal, and if any abnormal situation is found, it needs to be stopped in time for adjustment. 5.End of cutting:

When the workpiece is completely cut, the vertical band sawing machine is closed and cleaned. At the same time, the saw blade needs to be inspected for wear or damage, and replaced or repaired. It should be noted that when using a vertical band sawing machine, it is necessary to strictly abide by the safety operation procedures, wear safety helmets, goggles and other protective equipment, and avoid accidents.

Hello Kiss Yo Vertical band sawing machine is a commonly used metal cutting equipment, and the following are the steps to use it:1Preparation:

First of all, you need to fix the metal material to be processed on the workbench, adjust the height and angle of the workbench, and then check whether the saw blade is installed correctly, whether there are loose or worn and other problems. 2.Start the device:

Turn on the power, start the motor, make the saw blade start to rotate, and adjust the cutting speed and feed speed. 3.Start cutting:

Move the metal material to be processed in front of the saw blade and slowly advance until the saw blade begins to cut, taking care to maintain a stable feed rate and pressure to avoid the saw blade breaking or overheating. 4.Complete the Cutting Spring Lifting Circumcision:

When the cutting is completed, turn off the power, stop the rotation of the saw blade, and wait for the saw blade to stop, then you can open the machine cover and take out the cut metal material. 5.Clean up your device:

Use a vacuum cleaner or brush to clean metal shavings and oil stains from the surface and inside of the device to keep it clean and functioning properly. For your health and personal safety, please pay attention to the following during use:1

Be sure to wear protective glasses and gloves when using the device to avoid accidental injury. 2.During the cutting process, it is necessary to pay attention to the wear and looseness of the saw blade, and replace or adjust it in time.

3.Do not leave the equipment when it is running, so as to avoid accidents. 4.

When using the equipment, it should be operated in accordance with the operating instructions and safety regulations to avoid illegal operation.

1. The sawdust under the horizontal band saw can see whether the sawing pressure and conditions are correct

1. Very fine or powdery sawdust indicates that the feed rate should be increased or the speed of the saw band should be reduced;

2. Thick, heavy or blue sawdust indicates that the saw blade is overloaded, and the feed rate should be reduced or the speed of the saw band should be increased.

2. Saw band speed: (The saw band speed is determined by the type of material, the width of the material and the tensile force of the saw band).

1. Harder materials must use a lower saw belt speed;

2. The smaller width must use a faster saw belt speed.

3. Saw band pressure and feed rate: (The pressure and feed rate of the saw band are determined by the type of material and the width of the material).

1. Harder materials and larger width materials should use greater pressure and feed rate;

2. Softer materials and smaller widths should use less pressure and feed rate.

Fourth, contour sawing:

Please choose the most suitable type of saw blade according to the sawing material you need; Then select the width of the saw blade according to the minimum radian (radius) of the material you want to saw. The smaller the radian (radius), the narrower the width of the saw blade.

Saw blade tension: Before sawing with a new saw blade, the tension should be checked first. If necessary, taut after a small amount of sawing. The pretension stress of the cybote bimetal band saw blade is 250-300 N mm2.

Band saw guide: The cutting accuracy depends on the setting of the band saw blade guide: the closer the unit is to the material, the higher the cutting accuracy.

Cooling and lubrication: Cooling and lubrication are indispensable in most metal sawing processes. Cast iron, brass, and some non-metallic materials such as plastics and graphite can be lubricated during processing.

According to the structure, it is divided into scissor type, double column and single column band sawing machine;

According to the use situation, it is divided into manual type (economical type, manual feeding, manual cutting materials), automatic type;

According to the automation program using the controller, it can be divided into manual type (semi-automatic manual feeding) and fully automatic type (automatic feeding and automatic cutting);

According to the requirements of the cutting angle, it is divided into angle sawing machine (can saw, 90 degrees and 45 degrees), no angle, that is, 90 degrees, vertical cutting. 1. Sawing angle adjustment: If you want to cut any angle within the 45 degree angle, first relax the fixed handle, and then push the saw bow clockwise, aim at the angle scale you need on the angle scale on the seat, and lock the fixed handle.

2. When you adjust the sawing angle, the angle of the small vise also needs to adjust the relaxation of the vise fixing screw, and then push the small vise to the big vise, so that the angle of the small vise and the large vise is the same, after locking the fixing screw.

Saw band selection: 1. The life of the same saw band is mainly determined by a suitable cutting depth, and the cutting depth is determined by the size of the tooth saw, cutting speed (saw belt speed), cutting force (saw bow cutting speed), and cutting pressure. 2. The size of the tooth saw - the sawing edge tooth is too large and the number of teeth is small, which will make the cutting unstable, and due to the increase of the cutting load of each sawtooth, it is easy to make the sawtooth pull and chip.

If the tooth is too small, it is easy to cause sawdust clogging and wear and damage soon after use. When cutting soft workpieces with good toughness, you should try to use a coarsely serrated saw band, and if you want to get a good cutting surface, you should choose a fine serrated saw band.