The base of the kettle has water in, how to disassemble it?

If it is not very serious, you can use a hair dryer to dry, and then continue to use, if it is too serious, you can go to the shop where you buy it to find a professional to repair, or you can directly buy a base to replace, pay attention to follow a certain method when using it, in order to extend the service life.

The electric kettle is a more common electrical appliance in our lives, but when we use it, we will find that it leaks and the base is wet, so it is recommended not to continue to use it at this time to avoid the risk of electric shock, and it is best to disconnect the power supply and then solve it accordingly.

If it is not very serious, you can first use a hair dryer to aim at the contact port of the base, and dry the water flowing in, if you can, you can continue to use the electric kettle to boil water normally, if the situation is too serious, you need to repair, you can go to the store where you bought it to find a professional to repair, or buy a new electric kettle base to replace.

It is worth mentioning that when using the electric kettle, follow a certain method to avoid adding too much water when boiling water, or put it in an easy-to-touch place, so that it can effectively prevent water from entering the base, and the life of use will be extended a lot.

If the base of the kettle is filled with water, it generally does not need to be disassembled, and it can be continued to be used by placing it in a ventilated and dry place to dry. If you don't have professional experience in dismantling and repairing, don't dismantle it rashly, and ask professionals to dismantle it if necessary.

The handle is closed by clips, you can pry open the closed part with a thin driver, if you show the screws can be unscrewed, if you can't show it, try to push the handle up and down, you can disassemble the handle.

Method Step Divide into Songxiang categories:1The first is in the base, there are three screws, pay attention to one screw under the leakage certificate, remove the screws.

2.The handle near the base has a screw, which is also unscrewed with a screwdriver. 3.

Take off the lid of the pot, there are two screws on the handle, and unscrew it, and it is basically disassembled, and then it can be installed back on the dismantled one.

The electric kettle lid removal method 01 is first in the base, there are three screws, pay attention to one screw under the certificate, and remove the screws. 02 There is a screw on the handle near the base, which is also unscrewed with a screwdriver. 03 Then take off the lid of the pot, there are two screws on the handle, and they are also unscrewed, and they are basically disassembled, and then they can be installed back by pressing the disassembly.

Repairs for damaged kettle bases** are as follows:Tools: kettle, power socket, power supply base, torx crossdriver.

1. The kettle can't work normally, let's first see if there is electricity in the socket of the socks in Jiabi Zeli, and use the plum blossom cross driver to disassemble the base when there is electricity, and see if the line is aging to cause no power supply.

2. If the base is aging, you can buy a black power supply base to replace it, or you can buy a base, which is more cost-effective than buying a new one.

3. If the base is fine, you can take a look at the kettle assembly part.

4. Check the display light to see if the circuit is aging, see if the chassis connection is damaged, it can be replaced if it is broken, and then look at the circuit of the switch if the chassis is fine, and replace it if it is broken.

5. Most of the hot water is bad for the base, just change one, ** is not expensive.

Summary. Hello, the bottom of the kettle is flooded and can't be used! "The base of the electric kettle has entered the water, and I can't continue to boil water.

Water ingress into the base of the electric kettle will damage the components, causing a short circuit and causing great danger. Wet gases can enter the device through the bonding surface of the encapsulation material and the components. On the one hand, it causes oxidation, corrosion, and short circuit in the internal circuit, and on the other hand, the long-term non-use of electrical appliances will cause leakage in the circuit or circuit board.

In addition, in long-term rainy weather, it is easy to produce mold breeding, surface mildew and other phenomena. ”

Can you still use it if there is water at the bottom of the kettle?

Hello, the bottom of the kettle is flooded and can't be used! "The base of the electric kettle has entered the water, and I can't continue to boil water. Water ingress into the base of the electric kettle will damage the components, causing a short circuit and causing great danger.

Wet gases can enter the device through the bonding surface of the encapsulation material and the components. On the one hand, it causes oxidation, corrosion, and short circuit in the internal circuit, and on the other hand, the long-term non-use of electrical appliances will cause leakage in the circuit or circuit board. In addition, in long-term rainy weather, it is easy to produce mold breeding, surface mildew and other phenomena.

Hello, the bottom of the kettle is flooded and can't be used! "The base of the electric kettle has entered the water, and I can't continue to boil water. Water ingress into the base of the electric kettle will damage the components, causing a short circuit and causing great danger.

Wet gases can enter the device through the bonding surface of the encapsulation material and the components. On the one hand, it causes oxidation, corrosion, and short circuit in the internal circuit, and on the other hand, the long-term non-use of electrical appliances will cause leakage in the circuit or circuit board. In addition, in long-term rainy weather, it is easy to produce mold breeding, surface mildew and other phenomena.

Hello, the bottom of the kettle is flooded and can't be used! "The base of the electric kettle has entered the water, and I can't continue to boil water. Water ingress into the base of the electric kettle will damage the components, causing a short circuit and causing great danger.

Wet gases can enter the device through the bonding surface of the encapsulation material and the components. On the one hand, it causes oxidation, corrosion, and short circuit in the internal circuit, and on the other hand, the long-term non-use of electrical appliances will cause leakage in the circuit or circuit board. In addition, in long-term rainy weather, it is easy to produce mold breeding, surface mildew and other phenomena.

Can it still be used. It can't be used!

Hello dear! 1.You can see that there is a triangular screw at the bottom of the hood, and you need to have such a special screwdriver.

Generally, a set of screwdrivers bought online costs twenty or thirty yuan. 2.Rotate the inner shell to the right as shown in the diagram below and break it outward.

It can also be broken directly without rotating, which will slightly damage the buckle, but it will not cause damage to the buckle. 3.After breaking it open, 4

Dry after cleaning Huifu, and do not get wet on the electrical part 5Install the wire as shown in the figure below. Notch alignment.

The two cards can be installed when the buckle is aligned.

Preparation tool: Phillips screwdriver.

Specific steps: 1. First of all, there are three screws in the base, pay attention to one screw under the certificate, and remove the screws.

2. There is a screw on the handle near the base, which is also unscrewed with a screwdriver.

3. Take off the lid of the pot, there are two screws on the handle, unscrew it, and it will be removed.