What is the method of making styrofoam with 1 material and only one material for styrofoam?

It turns out that crispy mud and shower gel should be prepared, the specifics of which are as follows:

1. Put a small amount of bath gel directly into the crispy mud.

2. It needs to be taken out and put in your hands and rubbed constantly.

3. Continue to add the appropriate bath gel according to the actual situation.

4. If there is no problem, knead evenly until the color of the crispy mud becomes lighter.

5. In this way, after getting the results shown in the figure, the requirements can be realized.

The method is to use a body soap.

1. The first thing you need is to put the shower gel directly on the crispy mud.

2. In the next steps, you need to hold it in your hand and rub it constantly.

3. There is no need to stop in the middle, continue to add the appropriate bath gel.

4. If there is no problem, rub the crispy mud until the color fades.

5. In this way, it will be mixed evenly according to the diagram, and the styrofoam can be obtained.

Finish. <>

Materials required: water, glue, glycerin, makeup remover, fairy water to taste.

Here's how to make it:

1. Prepare water and glue in a ratio of 1:1 (add a little pigment to the glue).

2. Pour the prepared ingredients into a bowl.

3. Pour in a little makeup remover (to prevent your hands from sticking).

4. Use a tool to mix the ingredients in a bowl.

5. Add glycerin when stirring (to prevent the styrofoam from becoming brittle).

6. Add nymph water several times until the solution is no longer diluted.

7. Take out the thickened part and stretch it with both hands.

8. Fold and rub until your hands are no longer sticky.

9. When the foaming gel forms a complete shape, it is successful.

The method is to use a body soap.

1. The first thing you need is to put the shower gel directly on the crispy mud.

2. In the next steps, you need to hold it in your hand and rub it constantly.

3. There is no need to stop in the middle, continue to add the appropriate bath gel.

4. If there is no problem, rub the crispy mud until the color fades.

5. In this way, it will be mixed evenly according to the diagram, and the styrofoam can be obtained.

Finish. <>

Styrofoam is the simplest and easiest way to make styrofoam, only 2 materials.

1.Only one material of styrofoam is required.

Styrofoam with only one material is relatively simple to make, as follows:

1. Tools and raw materials.

Chenguang glue (Deli glue), water, container, shaving foam, borax water, glycerin.

2. Method steps.

1) Pour Deli glue (Chenguang glue) and a small amount of glycerin into the container.

2) Then add the shaving foam.

3) Then add water and stir, the ratio of water to glue is 1:2.

4) Add borax water in small quantities and stir as you go.

3. Precautions.

Don't add too much glycerin and don't add too much water.

2.Make styrofoam with 2 materials.

Styrofoam made with 1 material is more basic, so it may work better with 2 materials to make styrofoam.

1. The proportion of styrofoam needs to be reasonably adjusted in the production process, so as to be able to make suitable soft and hard styrofoam toys.

2. When making foaming glue, the ratio of water and glue is very important, and the ratio of water and glue should be kept at about 1:2 as much as possible.

3. When stirring in the later stage, it is necessary to adjust the proportion according to the situation, add materials with foaming effect for stirring, and after the general completion, you can add borax water for final solidification treatment.

4. At this time, if the styrofoam is hard, you can add a little extra water to it. When stirring, add water and glue according to the actual situation to adjust the softness and hardness of the foaming glue. If the styrofoam is relatively dry, it is best to add some glycerin to ensure that it is more comfortable to play with later.

Hello, it is a pleasure to serve you and give you the following answer: Styrofoam is a material that can be used to make styrofoam, and it can be used to make styrofoam in various shapes and sizes. The most commonly used material is silicone, which is concealed to bind air bubbles and water molecules together to form a foaming gum.

The methods and practices to solve the problem of styrofoam are as follows:1First, prepare the materials you need, including silicone, water, additives, and molds.

2.Mix the silica gel and water together and stir well, then add the additives and stir well. 3.

Pour the mixture into a mold and refrigerate it to solidify. 4.The solidified styrofoam is removed from the mold and soaked in warm water to soften it.

5.Remove the softened styrofoam, rinse in clean water, and let dry. Personal Tips:

1.When mixing silica gel and water, stir carefully and evenly so as not to affect the quality of the styrofoam. 2.

When putting it in the refrigerator, pay attention to control the time to avoid the styrofoam from taking too long to solidify. 3.When soaking in warm water, pay attention to controlling the temperature to avoid the foaming glue softening for too long.

4.When rinsing in clean water, pay attention to controlling the water flow to avoid damage to the styrofoam.