How to make styrofoam easily How to make styrofoam easily

Materials required: water, glue, glycerin, makeup remover, fairy water to taste.

Here's how to make it:

1. Prepare water and glue, the ratio of the two is 1:1 (a little pigment can be added to the glue).

2. Pour the prepared ingredients into a bowl.

3. Pour in a little makeup remover (to prevent sticky hands).

4. Use a tool to stir the ingredients in the bowl well.

5. Add an appropriate amount of glycerin during the stirring process (it can prevent the made styrofoam from becoming brittle).

6. Add a small amount of fairy water many times until the solution is no longer in a dilute state.

7. Take out the sticky lump and stretch your hands constantly.

8. Overlap and rub until it is no longer sticky.

9. After the styrofoam is formed into a complete shape, it means that the production is successful.

Styrofoam made (super simple).

Today, I will teach you to make your own styrofoam glue with common detergent, toothpaste, glue, hand cream and laundry detergent at home. How to make it:

Start by taking a clean container with a lid (disposable boxes are recommended); Squeeze some of the dish soap into the container.

Squeeze some more toothpaste into it and add a little water.

Close the lid of the container and shake vigorously until it foams.

Add a small half box of glue and squeeze in some hand cream and mix well with a spoon. Because the hand cream is pink, we don't need to add any extra color here.

Finally, add the laundry detergent and mix well with a spoon until the styrofoam is formed.

This way our homemade styrofoam is ready, soft and smooth, and it can also make a crackling sound.

Styrofoam simple method:Add an appropriate amount of glue to the container, then add a small amount of toothpaste and stir well. Add the pigment and stir well.

After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up when it bubbles and fold it several times. Repeat all of the above steps, foaming three times.

It should be noted that if the dosage cannot be accurately controlled, it is best to check the relevant information to make styrofoam. In order to avoid the foaming glue made, not only the viscosity is not enough, but also the quality is also problematic.

Introduction to styrofoam:Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming. Some of the products contain the toxic substance borax, please strengthen the care of parents to prevent children from ingesting by mistake, so as to prevent harmful substances from being ingested into the body.

Styrofoam is simple to make, safe and non-toxic without borax, and only glue and laundry detergent can be used to make foaming foam.

Ingredients: containers, glue, laundry detergent and straws. The steps are:

1.Pour 80 ml of glue into a clean container. This is the first critical step.

2.Add a pinch of coloring and glycerin to a bowl. This step can be omitted.

3.Then add a small amount of laundry detergent to the bowl several times. Stir as you add to fully integrate the ingredients. This is the second critical step.

4.After stirring and pulling repeatedly, roll the straw into the styrofoam, taking care to keep the other end of the straw clean enough to blow air.

5.This is a blown bubble.

Novices can do this with styrofoam:1. First add a piece of clay to the container, then add water to melt.

2. Then wait for it to melt and sail, and then add the pigment of your favorite color.

3. Add the usual hand sanitizer to rent hail, stir evenly, and then add to continue the foam stirring molding, if it is not enough, add it again and finally keep stirring, it takes a while, and after stirring and molding, you can judge the leakage of the hand, so that the styrofoam will be successful.

First take out the styrofoam, gently pinch it with your fingers, so that it emits a crisp kneading and tearing feeling, and then pull it with two hands, like ramen noodles to make it fully soft, and the cycle repeats, the discussion of styrofoam on the foreign ** has exceeded 30 million, and many people are keen to make all kinds of mucus, one of the important reasons is that people think that this soft, semi-liquid form of things can help people reduce stress.

Make styrofoam in 4 steps.

Prepare tools and ingredients: To make styrofoam, you'll need a blender, glue, oxidizer (such as liquid soap), and a container.

1. Pour the glue into the container: Pour the desired glue into the container.

2. Add oxidant: according to the concentration of the styrofoam you want to make, add an appropriate chemical agent to the glue. In general, the concentration of the oxidant used should be between 5% and 10%.

3. Use a stirrer to mix the glue and oxidant evenly. Continue stirring until styrofoam forms.

4. Fill the styrofoam into the container: pour the styrofoam into the container that you need to hold the cavity and let it cure at room temperature.

Precautions for making styrofoam:

When adding oxidant, it should be added slowly and continue to stir to prevent too much oxidant from making the styrofoam gum too thick and paste.

When using styrofoam, care should be taken to prevent ** contact and ensure good ventilation.

Styrofoam usually has a shorter lifespan, so it should be used as soon as possible.

When using styrofoam, care should be taken to avoid preventing excessive foam accumulation on the surface, which may result in uneven surfaces or cracks in the circle.

When using styrofoam, care should be taken to avoid mixing oxidants with other chemicals, as this may create harmful chemical reactions.

Care should be taken to avoid mixing the oxygen stage culturer with the metal when using styrofoam, as this may cause corrosion.

When using styrofoam, care should be taken to avoid mixing oxidizing agents with plastics, as this may cause the plastic to soften or discolor.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, you can't choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gelatin, stir well, and then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feelings, like a little harder mud, you can add a little more, like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that when adding borax water in the last step, the book and number should be controlled, and the first step of white glue should be controlled, so that the simple and fun "styrofoam" will be made!

Prepare a container and add an appropriate amount of glue to it. Then, add a small amount of toothpaste and stir well, you need to pay attention to the amount of toothpaste here, otherwise it will not bubble later. Then add an appropriate amount of the color of hand socks, add a few drops of the pigment of your favorite color and stir well.

After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up as it bubbles, then fold and fold again, and repeat it a few times after folding.

Foam it three times over and over again, and the more times you blister, the bigger it will be. In daily life, styrofoam is a kind of entertainment and entertainment products, which has the characteristics of softness and foaming.

Soft to the touch

Not only that, the main raw material of styrofoam is glue, which is not toxic and will not cause harm. That's why a lot of kids like to play with this. If borax water is not available, it can also be made with clay, glue, starch, coloring and shaving foam.

Styrofoam can be constantly rubbed and stretched, the touch is very comfortable, get a styrofoam, you can press with your fingers, it will have a crisp feeling, and the touch of your fingers is also very comfortable.

You can also put the stiff styrofoam gum in a basin and squeeze in the appropriate amount of cream. Rub the styrofoam, after kneading for a while, you can see that the styrofoam can be extended into a film, and when the styrofoam becomes drawn, it will be completely softened, and the effect of the cream and the styrofoam will be a perfect match.

The production method of styrofoam is actually very simple, only the chain leather liter needs to prepare the material and some simple steps. I would like to emphasize that it is necessary to choose the right material when making foam, because the quality of the material directly determines the quality of the finished product.

A professor at a medical university suggested using fresh aloe vera gel to make foam gum because it is loved and praised by many consumers and provides the best results. You can also choose other types of aloe vera gel to make foam gum.

Let's talk about the specific production steps. Pour fresh aloe vera gel into a clean container. Then, depending on how much foam you want to make, add the right amount of warm water. It is important to note here that the water temperature should be kept to the right or so.

Next, use a tamper or spoon to stir together the aloe vera gel and water evenly. Remember to use gentle motions and patiently stir until the two are well combined.

When mixing is done, wait for some time for the mixture to rest. During this process, you can observe that the mixture gradually becomes viscous, which is the basic molding process of the foam.

Pour the prepared foam into a container suitable for storage, close the lid and store. Before use, remember to shake well to ensure an even texture of the foam.

With the above simple steps, you can make a good quality foam. With its high quality and good reputation, this foam has been loved and praised by the majority of consumers.

Making foam gum is not complicated, just prepare fresh aloe vera gel and warm water, and mix and stir according to the correct ratio. I hope mine can help you. If you have any other questions, please feel free to ask me.