How to make the simplest styrofoam with glue

With liquid glue, glycerin.

Shaving foam, water and borax water can be used to make styrofoam.

Find a container first, pour the liquid glue into the container, and add shaving foam and glycerin, both of which can be added a little less. Then add water to it, about half the amount of glue. Finally, add borax water, pay attention to stirring while pouring, and the styrofoam is ready.

The main function of shaving foam is to make the mud foaming, and add borax water to solidify the liquid. The amount of water added will determine the degree of softness and hardness of this foaming, if you feel that the foaming gum is hard, add a little more water. If it feels dry, you can add some glycerin, which will be more comfortable to play.

If the styrofoam dries out after playing for a while, you can add glycerin and glue to mix and the styrofoam will become soft again.

If you don't have shaving foam at home, add shampoo and body wash.

Or a facial cleanser.

and foaming hand sanitizer, the styrofoam will be sticky.

1. Add white glue, the amount of white glue 90% determines the size of the finished product, and it cannot be poured more or less. 2. Add an appropriate amount of aloe vera gel, which replaces the traditional shower gel and hand sanitizer. 3. Add an appropriate amount of borax water, adding too much will make the final product too hard, too little will make the mud too thin, add a small amount of more, and add borax water little by little.

Evaluating Wonder Queen Glue? You don't need to add any foaming materials, you can foam up to 5 times bigger! Borax-free.

How to make the simplest styrofoam with glueMethod 1:

First prepare a container and add the right amount of glue to it. Then add a small amount of toothpaste and stir well. It should be noted that the amount of toothpaste must be paid attention to, otherwise it will not be able to bubble later.

Then add the pigment of your favorite color and stir well. After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up when it bubbles and fold it several times.

For all of the above steps, you can repeat the foaming three times.

Method 2: First add a piece of clay to the container, then add water to melt. Once it's melted, add the pigment of your favorite color.

After that, add your usual hand sanitizer and stir it well. Then add the foam and stir to mold, if not enough, add again. Keep stirring, and after stirring and molding, you can get started, so that the styrofoam is ready.

The styrofoam is made as follows:

Prepare water and glue in a ratio of 1:1 (you can add a little pigment to the glue). Pour the prepared ingredients into a bowl.

Pour in a little cleansing water (to prevent sticky hands). Use a tool to stir the ingredients in the bowl well. Add an appropriate amount of glycerin during the stirring process (to prevent the prepared styrofoam from becoming brittle).

Add a small amount of fairy water several times until the solution is no longer in a dilute state. Remove the thickened lump and stretch your hands constantly. Rub in layers until your hands are no longer sticky.

Note: Do not add too much water to glycerin during the making process, do not add too much. Add too much styrofoam to make it too brittle.

Materials needed: appropriate amount of toothpaste, facial cleanser.

Appropriate amount, appropriate amount of water, appropriate amount of glue.

1. Squeeze an appropriate amount of toothpaste into a small bowl.

3. Add water and stir.

4. Pour into a box with a lid.

5. Put in an appropriate amount of facial cleanser.

6. Shake the box.

7. Pour back into a small bowl after foaming.

8. Add glue and stir well.

9. Turn it into a solid form.

The simple way to make styrofoam is as follows

1.Pour Deli glue (Chenguang glue) and a small amount of glycerin into the container. 2.Next, add the shaving foam. 3.Then add water, stir, water and glue are 1: finally add a small amount of borax water and stir while adding and stirring.

Foaming gum is a simple way to make with toothpaste.

The method requires the preparation of an appropriate amount of toothpaste and facial cleanser.

Plastic boxes, bowls and other items.

Production steps: 1. Squeeze out an appropriate amount of toothpaste in the bowl, pour a small amount of water into the bowl and stir constantly until the toothpaste completely melts in the water.

2. Pour the stirred toothpaste into the prepared plastic box, add a small amount of facial cleanser to it, and shake the plastic box continuously after the lid to let the facial cleanser and melted toothpaste mix well until the plastic box is filled with foam.

3. Finally, pour the prepared foam into the bowl, the foam will look very delicate, and then add a small amount of glue to the bowl many times, stir them evenly until the mixture in the bowl forms water to complete the production of foaming glue.

Styrofoam is a very practical glue that can form a strong bond between various materials and is very convenient to use. How to make styrofoam? Actually, there is a super simple way to easily make your own styrofoam with just a few small tools and simple operations.

We need to prepare some plain PVA glue, white vinegar and baking soda. Mix these three materials together in proportions to create the styrofoam we need. The specific proportions are:

PVA glue accounts for 70% of the total, white vinegar for 20%, and baking soda for 10%.

Next, you need to pay attention to temperature control. Place the mixed ingredients in a container and stir with an appropriate amount of warm water. At this time, it should be noted that the water temperature is best controlled above, too low or too high will affect the foaming effect. Therefore, it is important to pay special attention to this when making styrofoam.

When stirring, stir the mixture vigorously and evenly until a homogeneous and delicate mixture is formed. Next, add an appropriate amount of detergent or soap to the mixture and continue stirring. The purpose of this is to allow the mixture to foam faster.

After a period of stirring, the mixture will gradually become swollen and foaming, and it will become the styrofoam we need. At this point, we just need to pour the glue into the container and use it.

The method of making styrofoam is very simple, only a few small tools and simple operations are needed to be able to easily make your own styrofoam. We can also control the quality and performance of the styrofoam by adjusting the ratio and temperature to meet the bonding needs between different materials.

It is not difficult to make styrofoam, just follow the steps above. I believe that by making styrofoam by yourself, you will have a better understanding of its characteristics and advantages, and you will have better application results in various occasions.

How to make styrofoam?

1.Pour a small half cup of glue into a glass and add a small amount of pure glycerin.

2.Squeeze in the shaving foam, which adds a super brushing effect to the styrofoam.

3.Using chopsticks, stir the glue, glycerin, and shaving foam in the cup until well mixed.

4.Add a small amount of borax water many times, stir while adding until molding, and test the extensibility of the bubble glue by hand after molding.

Summary. 1.Pour in a small half cup of glue and add a small amount of pure glycerin.

2.Shaving foam can add a super brushing effect to styrofoam.

3.Whisk the glue, glycerin, and shaving foam in the cup until well combined.

4.Add borax water in small quantities and many times.

Many products are substitutes for each other, such as foaming glue that can be made without glue.

Prepare a piece of ultra-light clay and put it in a container for a while, add an appropriate amount of shampoo, and then heat the water into the container, don't add too much hot water, and use a spoon to knead the clay into a viscous shape. Then add an appropriate amount of laundry detergent to the container and stir until it is formed.

It can also be made with dish soap, which can also be made without glue. First of all, prepare materials and tools, including bowls, foaming gum, dish soap, phosphor, color powder, etc.; Then pour the foaming gum into the bowl first, as the base liquid, you can pour more, the amount of this is more, and it is easy to form; After that, pour the dish soap into the bowl, and at the same time, you can add some fluorescent powder of your favorite color to it, as well as colored powder; After that, it can be stirred, and it is ready to be made by mixing evenly.

Precautions: When using dish soap to make foaming glue, you must pay attention to the fact that you don't need to put too much dish soap, after all, the main function of dish soap is to assist in foaming, and the main thing is to foam the original gum. When making styrofoam, it is necessary to pay attention to the ratio of various materials, and the container used can be a disposable bowl, so as to reduce the trouble of washing the container.

Summary. How to make styrofoam without glue?

1First prepare a piece of ultra-light clay, pinch it in your hand for a while, and put it in a container.

2 Then add an appropriate amount of shampoo, adding shampoo is mainly for the final mud can foam.

3 Then add hot water to the container, pay attention to the hot water must not add too much, otherwise it may not be successful, use a spoon to knead the clay into a viscous shape.

4. Then add an appropriate amount of laundry detergent to the container, stir until it is formed, and use laundry detergent to shape the mud and make the mud foam better.

How to make styrofoam is simple and fun, without glue.

Wait a minute, and the relatives are looking at the information for you.

How to make styrofoam without glue? 1First prepare a piece of ultra-light clay, pinch it in your hand for a while, and put it in a container. 2 Then add an appropriate amount of shampoo, adding shampoo is mainly for the final mud can foam.

3 Then add hot water to the container, pay attention to the hot water must not add too much, otherwise it may not be successful, use a spoon to knead the clay into a viscous shape. 4. Then add an appropriate amount of laundry detergent to the container, stir until it is formed, and use laundry detergent to shape the mud and make the mud foam better.

Hope you can learn and have fun.

The glue method for styrofoam is as follows:Tools: 100 grams of water, 100 grams of glue, 5 grams of glycerin, 10 grams of cleansing water, 10 grams of fairy water.

1. Prepare a piece of glue, a part of water, and the number of people holding the sail is the same.

2. Pour glue and water into the container.

3. Pour in an appropriate amount of makeup remover.

4. Use a tool to stir the materials inside.

5. During the stirring process, add a small amount of glycerin to prevent the made styrofoam from becoming brittle.

6. Pour in a small amount of fairy water many times until the solution is lumpy.

7. Take out the lumps of glue and rub them continuously.

8. Rub until it is no longer sticky, and you can use the hail shape of the stool.

9. The styrofoam is completed.

1. Pour less than half a cup of glue into the cup, then add a small amount of pure glycerin, and squeeze it into the shower gel, which can add a super drawing effect to the styrofoam. Use chopsticks to stir the glue, glycerin, and shower gel in the cup until well mixed. Add soda water and stir to mold, and test the extensibility of the bubble glue by hand after molding, and the foaming gum is completed.

2. Pour glue and a small amount of glycerin into the utensil. Next, add the shaving foam. Then add the water and stir, the water and glue are 1:2. Finally, add borax water in small quantities and stir while adding it.

3. Put shower gel in the utensil, scrape some soap crumbs with a knife, then pour in an appropriate amount of water, cover the lid, and shake out the foam for later use. Stand in another utensil and put the clay in it, then pour in hot water and stir it with a spoon to melt the clay. Once the clay has melted thoroughly, pour in the bubble water you just prepared.

Add enough glue and stir constantly with a spoon until formed.

4. Prepare an imitation macro utensil, add salt, add a little more, and then add pure water to dissolve the salt. Then additionally, prepare an empty utensil and pour in dish soap and pour a little more. Then stir in the glue.

Then add the freshly mixed brine and continue to stir until it is semi-solidified.

5. If the styrofoam is hard, you can add a little more water to it. When stirring, add water and glue according to the actual situation to adjust the softness and hardness of the foaming glue. If the styrofoam is relatively dry, it is best to add some glycerin to ensure that it is more comfortable to play later.