The easiest way to make styrofoam, the simple way to make styrofoam

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, do not choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gel and stir well, then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feeling, you can add a little more if you like a little harder, and if you like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that the last step is to control the borax water, and the first step of white glue is to be controlled, so that the simple and fun "styrofoam" is completed!

I believe that many people have a childlike heart of playing with mud, and styrofoam as a popular toy to decompress and kill time, presumably many friends have played, so in the absence of a lot of materials, how to make styrofoam? But many people don't know, so the following is a brief introduction to the practice of styrofoam.

Materials required for styrofoam gum: white gum, aloe vera gel, borax water.

First of all, add white glue, you can't choose too inferior white glue, otherwise the mud that can't be made is not good; Add an appropriate amount of aloe vera gel and stir well, then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feeling, you can add a little more if you like a little harder, and if you like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that the last step should be controlled when adding borax water, and the amount of white glue in the first step should be controlled, so that the simple and fun "styrofoam glue" will be made!

1.Pour less than half a cup of glue into the cup and add a small amount of pure glycerin, and squeeze into the shower gel, which can add a super drawing effect to the styrofoam.

2.Using chopsticks, stir the glue, glycerin, and body wash in the cup until well combined.

3.Add soda water and stir to mold, after molding, test the extensibility of the bubble glue by hand, and the foaming glue is completed.

The easiest way to make styrofoam is to use fresh aloe vera gel. This product not only has excellent results, but has also been well received by many consumers. We need to prepare fresh aloe vera leaves, cut them into chunks and beat them into a paste with a blender.

Then, put it in a pot with water and bring to a boil over low heat. Next, filter the boiled aloe vera pulp and add an appropriate amount of gelatin powder and stir well. The mixed liquid is poured into the mold and waits for solidification to obtain styrofoam.

In addition to using fresh aloe vera gel, you can also try other ingredients to make styrofoam. For example, a small amount of white vinegar, sugar, and cornstarch is added to the protein and whipped with a blender until firm to obtain a substance similar to styrofoam.

It should be noted that when making styrofoam, it is necessary to pay attention to the proportion and temperature control. If the proportions are not right or the temperature is not enough, the desired results will not be obtained. Attention should also be paid to hygiene and cleanliness to ensure that the styrofoam produced is safe and harmless.

Making styrofoam is not difficult, you just need to prepare the ingredients and tools you need, and follow the right steps and proportions to make high-quality styrofoam.

Have you ever wondered how simple it is to make styrofoam? Just a few simple materials are needed to DIY the styrofoam you want! First, you'll need to prepare some facial cleanser, saturated salt water, cornstarch, white vinegar, and a small bowl.

Pour the facial cleanser into a bowl, add an appropriate amount of salt water and stir well. Next, add the cornstarch until it reaches your desired consistency. Finally, add a teaspoon of white vinegar and stir well!

Of course, if you want to make styrofoam gum more conveniently, you might as well try fresh aloe vera gel. This product can be used directly in the cleanser without the need for additional ingredients. Fresh aloe vera gel can not only play a cleansing role, but also moisturize and soothe the skin, and is a very popular cosmetic product.

According to the beautician, the use of fresh aloe vera gel to make foaming gum is the best, which can not only ensure the cleansing effect, but also make the skin healthier.

In addition to making foaming gum, fresh aloe vera gel can also be used for **, hair care and other aspects. By mixing fresh aloe vera gel with other natural ingredients, you can create a wide variety of ** to treat different skin concerns. At the same time, fresh aloe vera gel can also improve the problem of dry and frizzy hair, making your hair more soft and shiny.

Overall, the easiest way to make styrofoam is to use fresh aloe vera gel. Not only is this cosmetic product convenient and practical, but it can also make your skin healthier and more beautiful. Whether it's making styrofoam gel or carrying out ** care, fresh aloe vera gel is your indispensable helper!

Finally, we remind everyone to pay attention to hygiene when DIY styrofoam to avoid bacterial growth. At the same time, if yours are allergic to certain ingredients, choose carefully. I hope you can learn some useful knowledge through this article to make your skin healthier and more beautiful!

In our daily life, laundry detergent is a relatively common and powerful laundry assistance product, and basically every household has used laundry detergent to clean clothes. Many people will go to the supermarket to buy some solderant laundry detergent and put it at home ready to eat. Everyone knows that the biggest function of laundry detergent is to clean clothes, but did you know that laundry detergent can also be made into styrofoam?

So how do we make laundry detergent into styrofoam? Next, let me introduce how to make laundry detergent into styrofoam.

Step 1: Prepare the following materials: transparent glue, glycerin, laundry detergent and molding water.

Step 2: Pour a small amount of laundry detergent (shampoo or shower gel can be substituted if you don't have one) into a clean container, and then pour in another 100 or 200 ml of liquid glue.

Step 3: After that, pour an appropriate amount of glycerin into it, and if there is no condition, you can use water instead of glycerin.

Step 5: In the process of adding materials, we must keep stirring, how to make the raw materials mix together.

Step 6: Finally, we add a large amount of foam and stir well, adding a small amount of molding water but many times until it is formed.

It should be noted that if the dosage cannot be accurately controlled, it is best to check the relevant information to make styrofoam. In order to avoid the foaming glue made, not only the viscosity is not enough, but also the quality is also problematic.

Here's how to make styrofoam:Material preparation: glue, glycerin, shower gel, chopsticks.

Operation steps: 1. Pour less than half a cup of glue into the cup and then add a small amount of pure glycerin, squeeze into the Muque file source shower gel, the shower gel can add a super drawing effect to the styrofoam.

2. Use chopsticks to stir the glue, glycerin, and shower gel in the cup until well mixed.

3. Add soda water and stir to mold, and test the extensibility of the bubble glue by hand after molding, and the foaming glue is completed.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, do not choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gel and stir well, then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feeling, you can add a little more if you like a little harder, and if you like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that the last step is to control the borax water, and the first step of white glue is to be controlled, so that the simple and fun "styrofoam" is completed!

First prepare a container and add the right amount of glue to it. Then, add a small amount of toothpaste and stir well, you need to pay attention to the amount of toothpaste here, otherwise it will not bubble later. Then add an appropriate amount of this pigment, add a few drops of the pigment of your favorite color and stir well.

After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up as it bubbles, then fold and fold again, and repeat it a few times after folding.

Foam it three times over and over again, and the more times you blister, the bigger it will be. In daily life, styrofoam is a kind of entertainment and entertainment products, which has the characteristics of softness and foaming.

Soft to the touch

Not only that, the main raw material of styrofoam is glue, which is not toxic and will not cause harm. That's why a lot of kids like to play with this. If borax water is not available, it can also be made with clay, glue, starch, coloring and shaving foam.

Styrofoam can be constantly rubbed and stretched, and it feels very comfortable to the touch, and when you get a styrofoam, you can press it with your fingers, it will have a crisp feeling, and the touch of your fingers is also very comfortable.

You can also put the stiff styrofoam gum in a basin and squeeze in the appropriate amount of cream. Rub the styrofoam, after kneading for a while, you can see that the styrofoam can be extended into a film, and when the styrofoam becomes drawn, it will be completely softened, and the effect of the cream and the styrofoam will be a perfect match.

First, the toothpaste to make foaming glue We usually use Zheng loss toothpaste can also be used to make this god foaming glue, first prepare a container, add an appropriate amount of glue, and add a small amount of toothpaste and stir evenly, then add a small amount of pigment and stir evenly, and finally add an appropriate amount of borax water to stir and shape, and wait for it to be blistered and repeatedly picked up and folded 3 times to complete.

Second, shower gel to make styrofoam shower gel is a pickpocketing sale in every home, we can use shower gel to make styrofoam, first prepare a container, pour a small amount of transparent glue, and pour in transparent shower gel, stir well, then add some molding water, stir until molding, let stand for about a week, styrofoam is ready. 3. Hand sanitizer to make styrofoam Prepare a container, add a clay to the container, add water to melt it, then add the pigment of your favorite color and stir well, and add hand sanitizer to stir, stir until foam appears and mold, and the styrofoam is completed.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, you can't choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gelatin, stir well, and then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feelings, like a little harder mud, you can add a little more, like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that when adding borax water in the last step, the book and number should be controlled, and the first step of white glue should be controlled, so that the simple and fun "styrofoam" will be made!

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, you can't choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gelatin, stir well, and then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feelings, like a little harder mud, you can add a little more, like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that when adding borax water in the last step, the book and number should be controlled, and the first step of white glue should be controlled, so that the simple and fun "styrofoam" will be made!