How to identify the quality of the toilet water tank

1. Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and feel that the glaze and the feel of the body are very delicate, which indicates that the quality of the toilet is better. If it is a low-grade toilet, the glaze and blank on its surface will be rough, the color will be dull, and small holes will be found under the illumination of the light.

2. Because of the high temperature of the high-end toilet during firing, it meets the requirements of all-porcelain, so it will feel heavy in the hand. The firing temperature of the low-end toilet is low and the time is short, so it does not meet the requirements of all-porcelain.

3. The water absorption rate of the toilet bowl fired at high temperature is very low, so it is not easy to suck in sewage and produce peculiar smell. However, some low-end toilets have a high water absorption rate, and when they are sucked into sewage, they are easy to emit unpleasant odors and are difficult to clean. Over time, cracks and water leaks will occur.

When choosing, you can gently tap the toilet bowl with your hands, if the knocking sound is hoarse, not crisp and loud, then such a toilet is likely to have internal cracks, or the product is not cooked.

4. When choosing, you should also reach into the dirt of the toilet with your hand and touch whether the inside is smooth. If it feels rough to the touch, it means that there is no glaze inside, and such a toilet is prone to water leakage. The sealing gasket of the toilet should be made of rubber or foamed plastic, which has strong elasticity and good sealing performance.

5. Whether the design of the pipeline is scientific and reasonable has a great impact on the flushing effect of the toilet. In general, you should test flushing the toilet before buying it. In the formal standard, in the case of less than or equal to six liters of water, the toilet bowl should be able to flush out at least five water-filled ping-pong balls on average for three flushes.

Liner quality: The quality of the liner is the key to the service life of the tank. The inner tank of the water tank can be divided into three categories according to its different materials:

Crystal liner, enamel liner, stainless steel liner. Large manufacturers mostly use 304 stainless steel to make the tank liner, which has excellent corrosion resistance and welding performance, high water storage and insulation efficiency, and is the mainstream of the water tank sector in the current air energy hot water industry.

Thermal performance of coil tube: coil tube is the key to good or bad heating, which is divided into two kinds of inner winding and outer winding according to the winding method, and both methods have their own advantages and disadvantages

1.Inner winding coil: The coil is inside the inner tank of the water tank, which is convenient for heating, but it increases the welding difficulty of the inner tank and shortens the service life of the inner tank. (At present, few manufacturers use the inner winding structure to make the water tank).

2.Outer coil winding: The coil is wound around the outside of the tank tank, which is easy to process and has a much longer service life.

Summary. Dear, the quality of many brands of toilet flushing tanks on the market is very good, such as Haolaiwu, Chuangsha, Osati Home, Weixing, Oujimei, Rikang Sanitary Ware, these brands of toilet flush tanks have a very good reputation.

The quality of many brands of toilet flushing tanks on the market is very good, such as Haolaiwu, Chuangsha, Osati Home, Weixing, Ojimei, Rikang Sanitary Ware, these brands of toilet flushing tank mouth return monument are very good.

When buying a toilet flush tank, you still have to master some buying skills. 1. First of all, we must see whether the toilet flush tank is cracked, when buying, you can bring a stick to gently knock it, directly knock on the edge of the flush tank, if the sound is relatively crisp, it proves that the flush tank is not cracked, if the sound is slightly hoarse, it proves that the porcelain is actually cracked. 2. Secondly, we should take a look at the quality of the glaze, usually the glaze of the toilet flush tank with good quality is very round and delicate, and particularly smooth, the most important point is that the quality of the product is relatively good, the glaze color is very uniform, and the quality of the product can be directly seen.

3. Finally, it is very important to pay attention to the after-sales of the product. Now the sellers on the market basically have their own very perfect after-sales service, and the big empty orange collapse should compare the after-sales service of various brands. Be sure to implement future installation and warranty services at the time of purchase to prevent future disputes.

When it comes to bathroom water tanks, I believe everyone is familiar with them. However, for most consumers, it is not easy to buy a bathroom water tank that is suitable for them, environmentally friendly and energy-saving. But don't worry, I will briefly introduce to you how to identify the quality of the bathroom water tank.

1.Whether there is cracking.

First, tap the edge of the tank with a thin stick, and then listen to whether it makes a crisp sound, if it makes a hoarse sound, it means that the tank is not of good quality.

2.The size of the deformation.

Put the water tank on a flat plane, and then carefully observe whether the four sides are stable and symmetrical, whether the edge of the device surface and the surface of the water tank is flat, and whether the device hole is uniform and smooth.

3.Glaze quality.

In addition to this, the quality of the glaze is also important to consider. First of all, it must be delicate and smooth, and the glaze color must be consistent. The method is very simple, that is, put a few drops of colored liquid on the glaze, and wipe it dry with a damp cloth after a few seconds, and the quality of the glaze without dirty spots is better.

4.Pay attention to the appearance.

The difference between the stainless steel water tank and the toilet of the split toilet is a whole, while the water tank and the toilet of the split toilet are separated, and the two should be connected with bolts when installed. Generally speaking, the size of the split toilet is small, which is suitable for small bathrooms; The design of the one-piece toilet is novel, and there are many styles to choose from. In addition, it is particularly important to observe the height of the toilet tank, because the higher the water tank, the greater the impulse, and the better the flushing effect.

5.Pay attention to the inside.

In order to save costs, many manufacturers will bend the Zen part of the toilet to do hands and feet. For example, some backbends are unglazed, while others use gaskets with low elasticity and poor sealing.

This type of toilet is not only prone to fouling, but also prone to water leakage. Therefore, when you buy, you can use your hand to reach into the dirty mouth in the toilet and touch whether the inside is smooth.

6.Pay attention to after-sales.

Usually, the sanitary ware on the market has after-sales service, so consumers should ask clearly when buying to avoid disputes in the future.

Summary: After reading the above rock introduction, I believe you have a further understanding of how to identify the quality of the bathroom water tank. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.