The fire valve room should not be locked, and the fire valve should be locked

Updated on society 2024-08-13
5 answers
  1. Anonymous users2024-02-16

    According to the national code, the fire protection system is tested on a quarterly basis. According to the maintenance and management of the valve, the following provisions should be met: 1. The auxiliary solenoid valve of the rainforest valve should be inspected every month and should be started for testing, and should be replaced in time when the action is abnormal; 2. The power supply and opening and closing performance of the electric valve and solenoid valve should be tested every month; 3. All control valves on the system should be fixed in the open or specified state with lead seals or chains, and the seals and chains should be inspected once a month, and should be repaired and replaced in time when damaged or damaged; 4. The control valve on the inlet pipe in the outdoor valve well should be inspected once a quarter, and it should be verified that it is in a fully open state; 5. The visual inspection of the water source control valve and alarm valve group should be carried out every day, and the system should be guaranteed to be in a trouble-free state; 6. A water discharge test should be carried out every quarter on the discharge test valves of all terminal water test valves and alarm valves of the system, and the system start-up, alarm function and water outlet should be checked to see if the water output is normal; 7. When the municipal water supply valve is fully open, the pressure difference of the backflow preventer should be tested every month, and it should comply with the relevant provisions of the current national standard "Pressure Reducing Backflow Preventer" GB T25178 and "Double Check Valve Backflow Preventer" CJ T160.

  2. Anonymous users2024-02-15

    Dear, hello, I am happy to answer for you the fire protection such as the front slag talk about the valve room should not be locked, the fire control room requires 24 hours on duty, so there will never be a time to lock the door! Unless the door is closed, people will lock the door when the building is empty. The fire pump room of the enterprise is not necessarily locked, and it can be unlocked to avoid the occurrence of fire fighting in a timely manner.

    This depends on the daily management requirements of the enterprise itself. Because the fire pump room belongs to the key part of fire safety, and there are clear requirements in the specification, the fire pump room should be separated from other areas by firewalls, fire doors, therefore, some enterprises in order to facilitate management, they directly lock the fire pump room, such as shopping malls, supermarkets, hotels and other units with more foreign personnel. However, some production and processing enterprises only have their own internal employees who usually work in the unit, and there are no outsiders, in order to facilitate daily inspections and emergency use, the fire pump room is not locked.

    There is no clear rule on whether it is locked or not.

  3. Anonymous users2024-02-14

    The requirement to lock the fire valve is to ensure the normal operation of the fire protection facilities and the effective use in emergency situations. Here are some common requirements for locking fire valves:

    1.Anti-misoperation: The fire valve is locked to prevent misoperation or abuse by non-professionals. Only trained and authorized personnel should operate and unlock the fire valve, ensuring its proper operation.

    2.Ease of operation: Although the fire valve is locked to limit unauthorized use, it needs to be unlocked quickly in an emergency. Therefore, the design of the lock on the fire valve should be convenient and fast to ensure that the authorized person can unlock it in time.

    3.Security and tamper-proofing: Locks on fire valves need to have some security to prevent unauthorized access or modification. The locks should be made of high-strength materials and equipped with anti-prying and anti-vandal designs to ensure that the system is safe and reliable. Shoot to do.

    4.Identification and documentation: For locked fire valves, there should be clear identification and documentation.

    Identification can include warning signs, unlock instructions, or labels to alert personnel that the valve is locked. At the same time, it is necessary to establish corresponding records to record the unlocking personnel and time, which is convenient for traceability and management.

    5.Regular inspection and maintenance: In order to ensure the effectiveness of the fire valve lock, the lock needs to be inspected and maintained regularly. Checks include the integrity, flexibility, and operability of the lock to ensure that it is working properly. If a problem is found, it should be repaired or replaced in time.

    It is important to note that specific requirements for locking fire valves may vary depending on the region, building type, and requirements of fire regulations. Therefore, local fire protection regulations and standards should be referred to in actual operation to ensure the safe and effective operation of fire protection facilities. <>

  4. Anonymous users2024-02-13

    Dear, I'm glad you about your Chunxiao problem. The fire valve is not lockable. Fire hydrants cannot be locked.

    According to the laws of our country, no unit or individual shall damage, embezzle, or dismantle or stop using fire-fighting facilities and equipment without authorization, and shall not bury, occupy, or block fire hydrants or occupy fire spacing, and shall not occupy, block, or close evacuation channels, safety exits, and fire truck passages. Doors and windows in crowded places shall not be equipped with obstacles that affect escape and fire fighting and rescue. Fire hydrant, officially called fire hydrant, is a fixed fire fighting facility, the main role is to control combustibles, isolate combustibles, and eliminate ignition sources.

    It is divided into indoor fire hydrants and outdoor fire hydrants. Fire protection systems include, outdoor fire hydrant system, indoor fire hydrant system, fire extinguisher system, and some will also have automatic sprinkler system, water cannon system, gas fire extinguishing system, fire detection system, water mist system, etc. The fire hydrant set is generally composed of a fire box, a fire hose, a water gun, a buckle, a bolt, a clip, etc., and the fire hydrant is mainly used by fire trucks to take water from the municipal water supply pipe network or outdoor fire water supply pipe network to extinguish the fire, and it can also be directly connected to the hose and water gun to extinguish the fire.

    Therefore, the indoor and outdoor fire hydrant system is also one of the important firefighting facilities for fire fighting.

  5. Anonymous users2024-02-12

    Introduction of Lock Ball Valve Lock Ball Valve is mainly used to lock the valve and protect the safety of the valve. Whether the valve lock is applied or not, it is related to the importance of safe operation, some valves are always open, and some valves are always closed, which needs to consider safety to avoid misoperation. There are a variety of valves, each valve has a different function, and these valves are pure balance according to different uses and distinguish different types.

    What is the locking valve and what is the function of the locking valve? In fact, it is easy to understand the seepage lock valve, the lock valve is a valve that can lock the position of the valve, and it is to control the valve. Next, let's talk about the locking valve and what is the role of the locking valve.

Related questions
14 answers2024-08-13

Actually, you don't need to take revenge on him. Judging by what you have said, you already know that he is such a person who likes to split his legs, so why should he accept him when he comes back to beg you. Is he the only man in the world? >>>More

47 answers2024-08-13

Young people's approach, if you like it, do it, what are you afraid of, it is possible that because you are afraid of embarrassment, and miss a happiness, a bad neighborhood relationship should not be an obstacle for you to be friends with him If you are confident enough in your charm, you don't have to worry about pranks and cold rejection, even if you don't have much confidence, there is no need to worry about these, because there are very few boys who play pranks, and the average boy will not reject a girl coldly, if he thinks that you two are not suitable to be boyfriend and girlfriend, He would also say that it was my honor to meet you as a friend.

13 answers2024-08-13

I think it should be professional! Here's why:

1. The quality of the existing soldiers is uneven. Some firefighters just don't like to learn, I think as a front-line combatant to learn some preliminary architectural knowledge, memorize the physical and chemical properties of commonly used hazardous chemicals; >>>More

15 answers2024-08-13

Tell her to get it! Be decisive! All broke up! Not like that"Nostalgia"! >>>More

7 answers2024-08-13

If you really like it, then learn it.