The height of the Ethereal headlights is adjusted, and the Ethereal headlights are automatically adj

How to adjust the height of the new Ethereal headlights, there is a light height adjustment knob on the left side of the center console, and the corresponding light height gear is marked on the knob. The "0" gear is the highest gear, and the "1" gear is one stop lower than the light height. The "2" position headlight height is a relatively low gear.

The height of the "3" gear is the lowest gear, and the adjustment should ensure a clear driving vision.

Car headlights, also known as car headlights, car LED daytime running lights, as the eyes of the car, are not only related to the external image of a car owner, but also closely related to safe driving at night or in bad weather conditions. The use and maintenance of car lights cannot be ignored.

The so-called headlights, that is, the high and low beams, the high and low beams of the original car can not be turned on at the same time, that is, the switch of the far and near lights, the switch handle is on the lower left side of the steering wheel, and the high and low beams can be switched by turning it up and down. The scope of use of headlights, the opening of the headlights is accompanied by the opening of the street lights, that is, when the street lights are turned on, the low beams must be turned on.

On sections with street lights, only low beams can be turned on, not high beams. In case of road sections without street lights, in principle, the high beams can be turned on, but generally the high beams are not turned on. This is because when the high beams are turned on, the eyes of the vehicle in front of you, the front seat of the opposite vehicle, and the eyes of the opposite pedestrian will also be dazzling.

Therefore, if you know how to drive, you should turn off the high beams in time.

1.Inside, you can find the light height adjustment knob on the left side of the center console.

2.The corresponding light height gear is marked on the knob.

3.Turn the knob to the "0" gear to the highest gear, and pay attention to whether it will affect the opposing vehicle.

4.The knob is adjusted to "1", and the light height of this gear is lowered by one notch.

5.The knob is adjusted to "2", and the headlight height is a relatively low gear.

6.The knob is set to the lowest gear in "3" gear, but with a clear driving view.

The height adjustment of the natural headlights needs to go to a professional repair shop, or you can go to a 4S shop.

The first thing you have to look at is whether your car's configuration supports headlight height adjustable? You look at the instructions on it and there is a method.

The automatic adjustment key of the Ethereal headlight is located on the left side of the dashboard of the car, that is, the operation panel on the left side of the steering wheel, as long as you press this button to turn on the automatic adjustment mode of the headlights, the headlights will be automatically adjusted after opening, the specific operation steps are as follows:

1. Step on the brake pedal of Dongfeng Nissan Teana.

2. Press the one-button start button of Dongfeng Nissan Teana.

3. The instrument of Dongfeng Nissan Teana lights up, and the power supply of the whole car is turned on.

4. Press the auto button of Dongfeng Nissan Teana.

5. At this time, the Dongfeng Nissan Teana headlights will be automatically adjusted.

Adjusting the headlight height needs to be manually adjusted from the headlight position, open the engine compartment, there are two height-adjustable plastic screws on the back of the headlights, and the headlight height can be adjusted to the appropriate position through the adjustment screws. The headlight adjustment steps are as follows: 1. The headlight is generally adjusted by height and low, and the headlight adjustment is adjusted by adjusting the position of the horizontal screw behind the headlight in the cabin.

2. The tools to be prepared first, tape measure, sealing glue, Phillips screws and hexagon socket. 3. The adjustment of the height of the headlights can not be arbitrary, find a site with a flat ground and a vertical white wall - for example, it is good in the underground parking lot. Facing the white wall, Na Na Na drove the car straight and slowly drove over, and stopped at the position where the front of the car was as close to the wall as possible.

Draw a vertical line on the wall corresponding to the center line of the front of the car. 4. Open the hood, look behind the headlights, pay attention to the height, and adjust to the appropriate position. The direction of the clockwise adjustment is to increase the height; The direction of counterclockwise adjustment is to lower the height. 

The automatic adjustment key of the Ethereal headlight is located on the left side of the dashboard of the car, that is, the operation panel on the left side of the steering wheel, as long as you press this button to turn on the automatic adjustment mode of the headlights, the headlights will be automatically adjusted after opening, the specific operation steps are as follows:

1. Step on the brake pedal of Dongfeng Nissan Teana.

2. Press the one-button start button of Dongfeng Nissan Teana.

3. The instrument of Dongfeng Nissan Teana lights up, and the power supply of the whole car is turned on.

4. Press the auto button of Dongfeng Nissan Teana.

5. At this time, the Dongfeng Nissan Teana headlights will be automatically adjusted.

The new headlight adjustment function is automatic adjustment, the sensor on the chassis will automatically control the headlight height motor adjustment according to the road surface and slope The initial value of the automatic headlight is 45 seconds to turn off, but this headlight can be adjusted, the adjustment range is 0s-180s, if it is adjusted to 0s, in automatic mode, that is, turn off the ignition, close the door, and turn off the light.

Ethereal Headlight Height Adjustment Position:

1. For Dongfeng Nissan Teana models, the automatic light is with automatic adjustment;

2. The old Teana is with height adjustment;

3. For the first digital disturbance, the height position sensor of the rear wheel suspension system is automatically adjusted, that is, the light is adjusted according to the vehicle load.

Ethereal headlight height adjustment method:

1. When the switch is toggled to the position, dial the lever forward to the position and turn on the high beam;

2. Turn the lever to the position and turn off the high beam;

3. When the headlight needs to flash, dial the wave rod to the reverse position, even if the headlight is not on, the headlight will flash. Headlight beam automatically adjusts: when the switch is on"on\"position, the headlight switch is on"auto\"location or"When positioned, the headlight beam automatically adjusts the beam height according to the driving conditions.

When the vehicle load is light or the road surface is flat, the headlight beam is at the normal height;

4. When the number of passengers on the vehicle or the luggage loaded, the headlight beam may be higher than the normal height. If the vehicle is driving on a slope, the headlights may shine directly on the rearview mirror of the car in front or the windshield of the car on the opposite side, which will affect its driver's vision. In the above cases, the automatic control device of the headlight beam will automatically adjust the headlight beam to the normal height.

What is the auspicious place for the height adjustment of the Nissan Teana headlights? The height adjustment of the headlights of the Zhiling Edition is located on the left side of the steering wheel, next to the Eco button. Headlight height adjustment means that the headlight height can be adjusted to obtain the best illumination distance and avoid danger.

This is a safety light configuration that uses an electric motor to electrically adjust the height of the headlights. The introduction of headlight height adjustment is as follows:

1. The headlight height adjustment knob is generally on the left side of the instrument panel, on the side of the light control switch;

2. Under normal circumstances, there are 0 to 3 numbers on the knob, and the larger the number, the lower the height. In most cases, a position of 0 is sufficient;

It is the initial position, which is a horizontal height, which is suitable for situations where there are people in the front row and the luggage is empty. 1-3 gears are suitable for when the vehicle is full and the luggage is full.