Tarot. Cut. Confused. What does the cut finger card mean in the tarot card array

Cutting cards in every array, will not be required. Signs and cut signs are common in tarot, but they are not absolute. After you shuffle the cards, you have to divide the cards into three stacks, such as 1, 2, 3 and then 1 into a pile.

The top card is your cut card. Cut cards are not drawn randomly.

This, first of all, is not allowed in tarot, that is, a question cannot be taken up twice, you can ask it from a different angle, but you cannot ask the same question and use the same card array. Do you understand? Otherwise, there will be problems like yours.

Yes, it doesn't matter. As long as they're together, it's still a complete deck of cards. Maybe this card has a special meaning for you. So it folded. You have to pay attention to the meaning of this card in tarot.

In fact, there is no such strict program, you have to cut the cards and shuffle the cards. As long as you do it quietly when you shuffle the cards, it is the same if you draw the cards directly without cutting the cards.

The same question is best not to ask twice. Even if you use different cards, you can't. Otherwise your hand will hate your actions for not telling you the correct answer.

Your two answers are opposite, which means that your hand is already angry at your actions. If you still want to ask, it's better to change the way, or change the time.

It doesn't matter if it's broken, but you'd better protect your cards, I love her every time I play them, and I sincerely hope that my cards will help me.

1. Cutting cards is a card at the bottom of the entire stack after the end of the cutting action, which suggests the background and tendency.

2. Signs are used to indicate characters, drawn from the sixteen court cards or selected according to their appearance.

There are a total of 78 tarot cards, including 22 cards for the big Arcana card and 56 cards for the small Arcana, which can be used separately for divination, or 78 cards can be mixed together for divination.

It is worth mentioning that tarot cards do not refer to a fixed type of card, in fact, there are many types of tarot cards, at least thousands, but most of them are actually based on the world's three major tarot systems.

Cutting cards is to explain the subjective mentality and ideas of the diviner, and the divination is his own idea of cutting the cards, that is to say, who wants to divinate who will pick up a stack of cards in a stack of cards, and the last one of the stacks is the cut card. Sometimes it's important!! If you use a sign, you don't have to cut the card.

Cut signs are cards drawn by the soothsayer before divination, and the method of drawing such cards can be selected from 16 court cards according to the age, occupation, or personality of the inquirer, while the signs are drawn from the main and second cards, and it seems that cut cards are rarely used now, and the boundaries between the two are also very confused, and their role is to accurately predict the results.

The cut of tarot cards is to divide the cards into three parts, and the top and bottom are stacked on top of each other.

First, pick up a stack of cards from the top of the stack of cards according to your own will, and place this stack below the original stack to become two piles. Then, take another stack of cards from the top of the second pile and place them on top of the first pile. Make three stacks of cards in front of you.

Next, it's up to the soothsayer to fold the cards back. Pick up the first pile and place it on top of the second pile, then place the stacked cards on top of the original third pile to revert to a single pile. Finally, turn the horizontal card to straight face, always downward.

Once you've shuffled the cards and stacked them face down, it's time to cut.

First, the soothsayer concentrates and picks up a stack of tiles from the top of the tiles of his own volition, and places it on the side close to you to become two stacks, and then, takes another stack of tiles from the top of the second stack and places it on the side close to the seeker, and there are three tiles in front of you.

Next, it's up to you to put the cards away, making sure to pay attention to the order. Take the first pile, put it on top of the second pile, make a stack, and then put the stack on top of the third pile, and it's another stack.

The last step, if you shuffle the cards correctly, now the cards should be placed horizontally, now you have to swing it straight, don't make a mistake about this one. If it is divination for the other party, then the card should turn 90 degrees counterclockwise, if it is divination for yourself, then the direction is reversed, once you get it wrong, the whole card meaning is reversed.

The cut ends. The flop is a bit simpler, you just have to pay attention to the left-to-right flip.

Cut. If you are using a signage, this step can be omitted. This step must be carried out by the diviner, as the purpose of the cut is known.

The mentality of the inquirer, cut by the inquirer, reflects his own thoughts. Here's how: Pick up any stack of cards.

The bottom of the picked up card is a cut card. For more information on cutting cards, please refer to the article "Cutting Cards".

1, the tarot cards face down fully shuffled (clockwise direction) 2, shuffled back continue to face down into a pile (1), horizontal in front of yourself 3, with the right hand from above to take about half of the cards on the side close to their own (2), and then from close to their own pile of cards (2) from the top to take half of the cards (3) above the original pile of cards (1) to form three piles of cards.

4. Then (1) + (2) + (3) are restacked together in this order.

5. Finally, the pile of cards is rotated in the direction of counting yourself (clockwise) and helping others count (counterclockwise). Now that you've cut your cards, you're ready to start using the array.

Note: When shuffling and cutting cards, you should silently read the questions to be asked in your heart; Avoid surprises when shuffling, such as drops, or cards facing up.

Shuffle: The shuffle direction used in your opening ceremony must be fixed in a positive or counterclockwise direction. Place the cards you want to use face down on the table and shuffle them in a specific direction like a mahjong game.

On the one hand, meditate on your questions and be careful to concentrate.

When you think the Hetaro cards are finished, fold them into a stack, place them horizontally on a horizontal plane, and then pick up another stack (as many as you want) from this pile and place it below the first stack.

Continue to pick up a stack from the second stack you just got and place it on top of the first stack with first instinct.

At this point, there are three stacks of cards in front of you.

You then pick up the middle stack of cards in the triad and place it on top of the bottom pile, and on top of the top stack of cards that combine the two piles.

The above has just been cut.

All you have in front of you is a stack of cards. If you are divining for yourself, or for others, but looking at things from your own standpoint, then turn the stack 90 degrees downwards to become a vertical stack.

If it is divination for others, then the stack of cards that were originally placed horizontally is rotated 90 degrees upward and counterclockwise to become a stack of vertical stacks.

Finally, gently open the stack with your dominant hand into a fan shape, and then you can draw cards with your sixth sense while you have your own problems in your mind.

In order to be able to make you understand.

The purpose of cutting cards is to understand the mentality of the diviner, so it is up to the diviner to cut, which is not a necessary step, as needed.

Method: Put a stack of cards face up on the plane, and the diviner will pick up a stack from it, and the last card in the card will be cut.

It's simple, in fact, cutting cards is not complicated. The three-fold method mentioned upstairs is also a cut card, but it is not a card cut out.

Of course, what it represents is not the mentality of the diviner, its function is just to pound it once, I don't do it anymore

However, some arrays require this to be done several times, and it will be possible if you don't do it