-
Anonymous users2024-02-15Radiator specifications.
1. The common specifications and standard heights of radiator manufacturers are 600mm, 1200mm, 1500mm, and 1800mm, and there are many stocks. Consumers can calculate the number of radiators according to the specific width of the radiator.
mm wide radiators. The width of a single radiator is 50mm, the spacing between the pieces is 10mm, and the thickness of the radiator can be 50mm, 60mm, 98mm and other combinations according to different needs. The width of the film is relatively narrow, the water flow per unit time is less, the flow rate is fast, and the heat dissipation is also faster, which is an economical one.
mm wide radiators. The width of the monolithic piece is 60mm, the spacing is 10mm radiator, the width is increased, it can hold more water, the stored heat is more, and the heat dissipation of the monolithic is larger, but the temperature rise is slower than that of 50mm. In addition, a radiator with a height of 1800mm and a width of 60mm can heat a room area of 3 square meters.
4. Full height: refers to the actual height of the radiator, the dimensions marked on the general radiator are 600mm, 1500mm, 1600mm, and 1800mm refer to the full height of the radiator, which is also a common size on the market; Distance: refers to the distance between the inlet and outlet of the radiator, which can also intuitively reflect the height of the radiator; For conventional radiators, the difference between the distance and the full height is generally 50-90mm.
-
Anonymous users2024-02-14Radiator size specifications vary depending on the brand, model, material and other factors, the following are some common radiator size specifications:1Cast iron radiators:
The height is generally 500mm, 600mm, 700mm, 800mm, 900mm, the length is generally 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, steel radiator: the height is generally 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, the length is generally 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, aluminum radiator: the height is generally 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, the length is generally 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, stainless steel radiator:
The height is generally 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, and the length is generally 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, FRP radiator: the height is generally 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, The length is generally 400mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm. The above are only the specifications of the common radiator size, which is subject to the actual products of Liang Shusou.
-
Anonymous users2024-02-13The specifications of each model of radiator are different, and I will list a few of the more popular radiator specifications for you.
1. Steel radiator 60dDiameter: 6 minutes (special customization 4 minutes 1 inch).
Single column width: 60mm
Single column thickness: 90mm
Clearance per column: 9mm
Center distance: 526mm
Full height: 600mm
Heating width: 69mm*n+22mm
Heating method: central heating and self-heating.
Installation: wall-mounted and stand-up.
Water inlet and outlet mode: upper and lower on the same side, upper in and lower out on the opposite side, lower in and lower out, bottom in and bottom out.
The specific parameters are shown in the figure below
Steel radiator 60d
2. Copper-aluminum composite radiator 9090DDiameter: 6 minutes (special customization 4 minutes 1 inch).
Single column width: 90mm
Single column thickness: 90mm
Clearance per column: 7mm
Center distance: 557mm
Full height: 600mm
Heating width: 97mm*n
Heating method: central heating and self-heating.
Installation: wall-mounted and stand-up.
Water inlet and outlet mode: upper and lower on the same side, upper in and lower out on the opposite side, lower in and lower out, bottom in and bottom out.
The specific parameters are shown in the figure below
Copper-aluminum composite radiator 9090D
3. Steel plate radiatorThe regular height of steel plate radiator is divided into 3 types: 300mm, 600mm, 900mm width can be customized, from 400mm to 2600mm.
300mm, center distance 250mm, thickness 103mm, 600mm, center distance 550mm, thickness 103mm, 800mm, center distance 850mm, thickness 103mm, single group heat dissipation area is the smallest and highest.
Steel panel radiators.
Answer: The original iron radiator in the countryside can be heated by natural gas wall-hung boiler for the following reasons: >>>More
I use Senrat's radiators at home, their radiators are of good quality, sprayed on the outside, anti-corrosion layer inside, and the product protection is done in every corner, which is worth buying.
If you want to use a heater for heating, you must go to the market and buy a good radiator. >>>More
If the heating season is not hot, most families will go to the heating to put water, but at the beginning it is black water. So the question is, why is there black water at the good end of the heating? These black waters are all from **, let's follow the golden flagship flag brother to find out. >>>More
1. The installation conditions of radiators and floor heating are different. >>>More