Whether the painted glass has fire resistance

Painted glass does not have fireproof performance, and only fireproof glass is used to have fireproof performance, and fireproof glass will be marked with fireproof signs.

Lacquered glass is a highly expressive variety of decorative glass, which can be embodied by spraying, rolling, screen printing or spraying. Lacquered glass is also called back-lacquered glass in the industry, which is divided into flat lacquered glass and frosted lacquered glass. It is to spray paint on the back of the glass and bake it in the oven at 30-45 degrees for 8-12 hours, and it is generally dried naturally in many places where lacquered glass is made, but the adhesion of the paint surface of natural drying is relatively small, and it is easy to fall off in a humid environment.

As we all know, paint has a certain harm to the human body, in order to ensure the requirements of modern environmental protection and human health and safety needs in the lacquered glass, it is necessary to pay attention to the use of environmentally friendly raw materials and coatings in the production of lacquered glass.

Of course, it has fire resistance.

Ask a professional.

Fireproof glass is a special glass that can maintain its integrity and thermal insulation in the specified fire resistance test, and is divided into three categories according to the fire resistance performance class:

Class A fireproof glass that meets the requirements of fire resistance integrity and fire resistance and thermal insulation. This kind of glass has light transmission, fire resistance (smoke insulation, fire insulation, shielding heat radiation), sound insulation, impact resistance, suitable for building decoration steel and wood fire doors, windows, lighting, partition walls, lighting roofs, smoke barrier vertical walls, perspective floors and other building components that need to be both transparent and fireproof.

Class B fireproof glass that meets the requirements of fire resistance integrity and thermal radiation intensity at the same time. This kind of fireproof glass is mostly composite fireproof glass, which has the characteristics of light transmission, fire prevention and smoke insulation.

Class C fireproof glass that only meets the requirements for fire resistance integrity. This kind of glass has the characteristics of light transmission, fire prevention, smoke insulation and high strength. It is suitable for fireproof glass partition walls, fireproof windows, outdoor curtain walls, etc. without thermal insulation requirements.

Structurally, fireproof glass is divided into composite fireproof glass and monolithic fireproof glass.

It is necessary to do the base layer, from the perspective of expansion, the glass and the wall are relatively small expansion coefficients, so it is easy to squeeze and damage in the case of external temperature and gravity. Generally, MDF, blockboard, and multi-layer board are used as the base layer, and the thickness is 9-15mm.

The specific method of sealing the wall edge on the lacquered glass is:

The wooden base layer is the base, and it can also be directly pasted, and the decorative nails can also be fixed, and the edges must be closed with metal strips.

It is best to close the edge of stainless steel or marble, if it does not look good, you can consider making a simple decorative shape on the edge, one is to decorate and the other is to play the role of the periphery.

You can do it without it. Is the paint you baked transparent or not transparent? It is necessary to do the base layer thoroughly, otherwise it will not be beautiful when you see the wall.

If the wall is not flat, it has to be done at the base level, then it depends on the cost, and there is the direction where it is.

Halo teaches people like this>> we must do the grassroots.

The main thing is to make the glass have strong adhesion, because the wall plastering, the mortar surface, the buoyancy, the climate, the anti-moisture and other reasons will make the glue detached, and there will be hidden dangers, such as saving costs, using silicate board as the base layer

Hello! If you use it yourself, from the analysis of the three materials themselves, the grade of acrylic is obviously inferior to the latter, but the universality of lacquered glass and anti-riot glass can be found everywhere in the market, just do some articles on its surface to enhance its aesthetic value and **.

If we install it ourselves, choose a higher grade, with its own unique explicitness, and the change of taste is also what we need in life, you say. So, I'm not very much in favor of you choosing either one.

However, I can recommend to you a unique jade glass that is the first in China, with a strong sense of three-dimensionality, novel and noble texture, and only if you look carefully, it will attract your attention!!

Acrylic expensive lacquered glass is good I plan to get it myself next month to decorate the acrylic with the lighting effect is better.

Lacquered glass is the best, you choose the right, I am Shenzhen Zhuo Zhong Acrylic Xiao He.

Advantage 1, bright color, full of luxury, with a strong visual impact.

2. Superior moisture-proof and waterproof performance, not afraid of wet weather.

3. Strong anti-fouling ability, no oil seepage, indicating that the dirt is easy to clean and has corrosion resistance.

4. High stability, wear resistance, durability and hardness.

5. No edge banding is required.

6. Good fire performance.

Disadvantages: The disadvantage of baking paint technology is that the process level is high, the process is more complex, and the cycle is longer, which requires higher technical investment from manufacturers, so it remains high. Painted furniture is as afraid of hard objects as the surface of the car, so you should pay attention to maintenance and avoid collisions when using; Long-term oil smoke will make the paint furniture form a certain color difference, so it should be avoided to paint furniture and other paint craft products in contact with the smoke.

There is no special place, such as the office conditions are now more advanced than before, just like the office conditions are superior and the office quality is generally different, and the final result is not very different.

Lacquered glass: It is also called back-lacquered glass in the industry, which is divided into flat glass baking paint and frosted glass baking paint. It is to spray paint on the back of the glass and bake it in the oven at 30-45 degrees for 8-12 hours, and it is generally dried naturally in many places where lacquered glass is made, but the adhesion of the paint surface of natural cool drying is relatively small, and it is easy to fall off in a humid environment.

Lacquered glass has a strong decorative effect. It is mainly used for the decoration of walls and background walls, and is suitable for indoor and outdoor decoration in any place.

Glass film: It is a multi-layer polyester film used to stick on the surface of flat glass, which can improve the performance and strength of glass, so that the original ordinary glass has the functions of energy saving, heat insulation, heat preservation, explosion-proof, safety, anti-ultraviolet rays, beautifying appearance, covering privacy, etc., mainly used for doors and windows, partitions, ceilings, etc. Compared with ordinary flat glass, tempered glass, and semi-tempered glass alone, the properties of the coated glass can be greatly improved.

It is to post a functional film on the ordinary glass to play the role of heat insulation, cold protection, riot protection, bulletproof, ultraviolet isolation, one-way privacy, and sound insulation.

Find a place for white steel to process white steel bars, right-angle or U-shaped buckles, wrap, and the material of the glass is also very matched, and the glass glue paste is also firm.

Woodworking board glass is generally made of glass glue + double-sided tape; During construction, paste a few strips of double-sided tape on the glass surface, and there should be double-sided tape in the bubble desert. Then evenly beat the glass glue over, and then mix it with the blockboard, and wait for the glass glue to dry completely.

Blockboard is commonly known as large core board, wood core board, woodworking board is made of two pieces of veneer in the middle of the glued splicing board. The total thickness of the two-sided adhesive veneer of the blockboard shall not be less than 3mm. The width of the corner defects of all kinds of blockboards within the nominal format shall not exceed 5mm, and the length shall not be greater than 20mm.

The intermediate plank is made of high-quality natural wood planks after heat treatment (i.e., drying in the drying room), processed into wood strips of a certain specification, which are spliced by a puzzle machine. The spliced wooden board is covered with two layers of high-quality veneer on both sides, and then glued by cold and hot presses.

Glass glue is a material that bonds and seals various types of glass with other substrates. There are two main categories: silicone glue and polyurethane glue (PU).

Silicone glue sealant - is what we usually call glass glue, and is divided into two kinds of acidic and neutral glue (neutral glue is divided into: stone sealant, mildew sealant, fireproof sealant, pipe sealant, etc.).

I've done it before, the veneer and woodworking board are directly closed with wooden lines, and the painted glass is installed directly after the edge, and the mouth is confiscated, and the effect can also be seen.

Stain it with stainless steel at right angles with glass glue.

Edge banding with aluminum alloy, there is such an edge banding strip.

To use tempered glass. It doesn't hurt if it's broken. 2.4 meters without splicing, a large advertising nail every 30cm.

The foundation of the residency in Italy is solid.

Of course, it is recommended that the glass glue should be made with neutral structural glue, and the wooden board should be changed to a silicon calcium board, which should not be rotted back.

Rotten, if you can make a frame, it will be foolproof to hold the glass up, and the frame will be more beautiful if it is wrapped in stainless steel or aluminum-plastic panel. It is recommended not to use advertising nails, (easy to break, screws rust and broken glass).

If you plan for a long time, it is recommended to use a hot-dip galvanized square pipe shelf, and you should also brush the anti-rust paint.

Water resistance, strong acid and alkali resistance. - Use environmentally friendly paints, health and safety. -Strong adhesion and not easy to fall off.

Excellent anti-slip performance. -UV resistance, strong resistance to color aging. - Strong color selectivity.

Strong weather resistance and structural adhesive compatibility. -Strong stain resistance and easy to clean.