Loubang tile adhesive and Yuhong s which is good

Updated on home 2024-08-12
12 answers
  1. Anonymous users2024-02-16

    Currently Lou Bang adhesives.

    The content of pure imported emulsion is only 25 right, not suitable for sticking long-term wet bathroom kitchen tiles, the glue is easy to decompose, corrode and crush to cause bricks, please treat it correctly and use it reasonably. Yuhong adhesive has just been developed, the current quality is not stable, it is a two-component general 100 type, the operation is labor-intensive, the construction period is delayed, there is no chemical penetration function, and the ratio is just a normal tile interface agent.

    Fooling the common people.

  2. Anonymous users2024-02-15

    Loubang tile adhesive is an alternative to conventional interface agent, and there will be no hollowing off of the tile after use. At the same time, it is a one-component water-based green environmental protection product, easy to use, excellent bonding performance, waterproof, aging resistance, with a particularly strong bonding effect, is an ideal bonding product for vitrified tiles, pasted wall and floor tiles, mosaics, marble, and natural stone. Hope mine is helpful to you, hope!

  3. Anonymous users2024-02-14

    The Lou Bang recommended by the master was a little suspicious at first, but then it took a long time for the master to change the position of the switch and smash a brick. It also let me see with my own eyes that the effect of Loubang adhesive is really good, and it is really right to choose Loubang

  4. Anonymous users2024-02-13

    The wall tiles of my old house before are empty, and then the new house is used to install Loubang products, the effect is very good, I knocked on it some time ago, and the wall is very strong and not empty!

  5. Anonymous users2024-02-12

    Lou Banggui is like that, and the quality is like that, and you can think about it yourself.

  6. Anonymous users2024-02-11

    Weika tile adhesive for tile inlay, ceramic tile in the scraping tile adhesive, can directly use ordinary cement mortar for inlay, can greatly reduce the cost of paving, the construction process of this product does not need to change the traditional construction methods and habits, the mortar scraping on the back of the paving material (such as vitrified brick, marble, etc.), no need to wait, that is, scrape and paste.

    It can save a lot of construction time, and the ceramic tile adhesive forms a polymer polymer network through the molecular permeation link between the molecule and the cement mortar, so that the polar groups or chain links of the two interfaces are close to each other, and in this process, the ceramic tile adsorption force is generated, so that the ceramic tile adhesive and the cement mortar molecules, and the interfacial molecules produce mutual gravity, so that the distance between the molecules is further shortened to the maximum stable state. In order to achieve super adhesion, the ceramic tile and cement mortar are firmly combined, after the mortar penetrates and solidifies, the bonding strength of the tile and the cement mortar is greatly improved, and the thermal expansion coefficient of this product is close to that of concrete, so it is difficult to detach from these bonded substrates.

    Ensure that the interface bond is strong, with good water resistance and long-lasting and reliable weather-resistant adhesion, and the service life can reach more than 30 years.

    It solves the problem of low water absorption of ceramic tiles such as: vitrified bricks, antique bricks, microcrystalline stone, marble, granite, etc., which are easy to fall off, and this product is white or colored paste material.

  7. Anonymous users2024-02-10

    Dear, I am glad to answer for you: Lou Bang and Yuhong tile adhesive which is better to answer Lou Bang, at present, Lou Bang adhesive pure imported emulsion content is only 25 right, not suitable for long-term wet bathroom kitchen tiles, glue is easy to decompose, corrode and crush resulting in bricks, please treat it correctly and use it reasonably. Yuhong adhesive has just been developed, the current quality is not stable, it is a two-component general 100 type, the operation is laborious and laborious, delaying the construction period, there is no chemical penetration function, the ratio is just a normal tile interface agent tile adhesive is applied to the back treatment of the wet paste glass side of the brick, effectively lifting the bond strength between the high vitrified brick and the adhesive material, and solving the common hollowing and falling off problems in the wet paste of the vitrified brick.

    Unlike other glues, the specific chemical composition of ceramic tile adhesive effectively ensures the adhesion of ceramic tiles to the wall.

  8. Anonymous users2024-02-09

    Summary. The main reason why Loubang adhesive is so expensive is that the product itself has certain advantages, and the reputation of the product is relatively high.

    It's the same as when we buy materials, we have to choose the kind of environmental protection coefficient that is better. So the products produced by large companies are based on the fame of the product, and the more famous the company, the better their products are, so it will naturally be more expensive.

    However, Loubang adhesive is such a situation, the company has a good reputation, coupled with the environmental protection coefficient of the product is very high, and the use effect is very good, so it is normal to be a little higher.

    How is Loubang tile adhesive online twice as expensive as a physical store.

    The main reason why Loubang adhesive is so expensive is that the product itself has certain advantages, and the reputation of the product is relatively high. It's the same as when we buy materials, we have to choose the kind of environmental protection coefficient that is better. So the products produced by large companies are based on the fame of the product, and the more famous the company, the better their products are, so it will naturally be more expensive.

    However, Loubang adhesive is such a situation, the company has a good reputation, coupled with the environmental protection coefficient of the product is very high, and the use effect is very good, so it is normal to be a little higher.

    It's more than twice as expensive online than in a physical store.

    There is a part of the physical store that can be said to be hung with that name, but he is not necessarily produced by his real company But online, if you buy it in ***, it exists** higher than the physical store, which is indeed a very normal situation Because if his physical store ships to you, he will have to bear the shipping cost, as well as the damage fee in the middle.

  9. Anonymous users2024-02-08

    Summary. The difference between the three, fourth and fifth generations of Loubang tile adhesive.

    The difference between the 4th generation product and the 3rd generation product: the packaging of the fourth generation product is atmospheric and exquisite. The laying time is shortened to 5-10 minutes.

    The painting area is 15 square meters more than that of the 3rd generation. Stronger adhesion (more than 15 percent stronger than the 3rd generation). The color is different (pale yellow for the 3rd generation, light green for the 4th generation).

    The fifth-generation Loubang is the best, with a super penetration effect, stronger adhesion and more durable.

    Characteristics and advantages: suitable for indoor and outdoor concrete, smooth transformation of concrete frame transverse plate after demolition, cement mortar, base surface (wall), anti-cement plastering, fan ash, yellowing, old wall (ground) renovation waterproof and anti-falling off, vitrified bricks, polished bricks, artificial stone, antique bricks, ceramic tiles on the wall and ground paste, to avoid hollow drum falling off.

    The difference between the three, fourth and fifth generations of Loubang tile adhesive.

    Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

    The difference between the third, fourth and fifth generations of Loubang tile adhesive is the difference between the fourth generation of products and the third generation of products: the packaging of the fourth generation of products is atmospheric and exquisite. The laying time is shortened to 5-10 minutes.

    The painting area is 15 square meters more than that of the 3rd generation. Stronger adhesion (more than 15 percent stronger than the 3rd generation). The color is different (pale yellow for the 3rd generation, light green for the 4th generation).

    The fifth-generation Loubang has the best number of keys, super penetration effect, stronger adhesion and more durable characteristicsAdvantages: suitable for indoor and outdoor concrete, smooth transformation of concrete frame transverse plate after demolition, cement mortar, base surface (wall), anti-cement plastering, fan ash, yellowing, old wall Qi Xue (ground) surface renovation waterproof and anti-falling off, vitrified bricks, polished bricks, artificial stone, antique bricks, tiles on the wall and ground paste, to avoid hollow drum falling off.

  10. Anonymous users2024-02-07

    Loubang and Yuhong are both well-known ceramic tile adhesive brands, and they have a certain reputation and sales in the market. Specifically, the following aspects need to be considered:

    Quality: The quality of the tile adhesive is one of the most important factors. It should have good adhesion, water resistance, durability, and should meet the relevant national standards. You can refer to product manuals, user reviews, third-party certifications, and more to evaluate quality.

    **: The difference between Loubang and Yuhong may be large, and you need to choose according to your budget. However, ** is not necessarily the decisive factor, and sometimes a higher ** product is not necessarily better than a lower ** product.

    Variety: The varieties of ceramic tile adhesive include a variety of specifications, colors, materials, etc. You can choose the right variety according to your needs.

    After-sales service: After purchasing ceramic tile backs, after-sales service is also very important. You can learn about the brand's after-sales service policy, including returns, exchanges, repairs, etc. In addition, the credibility and reputation of the brand is also an important reference factor.

  11. Anonymous users2024-02-06

    Summary. Hello pro I am glad to serve you: is Loubang tile adhesive good?

    Good pro Loubang is a big brand, the quality is very good, and it is easy to use. Loubang tile adhesive is made of ultra-nano material, with a very small molecular radius (more than 5000 mesh), and has strong adhesion and penetration. Comply with JC T547-2005 ceramic wall and floor tile adhesive standard.

    Tile adhesive + cement mortar paving, the construction cost is much lower than that of tile adhesive; Do not change the construction methods and habits, open the barrel and use, that is, scrape and paste; Water-resistant, age-resistant, signed a quality assurance certificate with various manufacturers for 20 years; Brick and tile adhesive, environmentally friendly and non-toxic; Strong adhesion, Lou Bang Tie Bi'an tile adhesive expansion coefficient close to concrete, so it is difficult to get out of the bonded substrate, before dry solidification through the adhesive elasticity to the cement mortar penetration, mutual polymerization produces a strong adsorption force and cohesion, dry solid adhesive and cement mortar bonding strength greatly improved.

    Which is good with Yuhong C90 tile adhesive?

    Hello pro I am glad to serve you: is Loubang tile adhesive good? Good pro Loubang is a big brand, the quality is very good, and it is easy to use.

    Loubang tile adhesive is made of ultra-nano material, with a very small molecular radius (more than 5000 mesh), and has strong adhesion and penetration. Comply with JC T547-2005 ceramic wall and floor tile adhesive standard. Tile adhesive + cement mortar paving, the construction cost is much lower than that of tile adhesive; Do not change the construction methods and habits, open the barrel and use, that is, scrape and paste; Water-resistant, age-resistant, and signed a 20-year warranty with various manufacturers for quality assurance; Brick and tile adhesive, environmentally friendly and non-toxic; Strong adhesion, Lou Bang Tie Bi'an tile adhesive expansion coefficient close to concrete, so it is difficult to get out of the bonded substrate to get rid of the bright pants, before dry solidification through the adhesive elasticity to the cement mortar penetration, mutual polymerization produces a strong adsorption force and cohesion, dry solid adhesive and cement mortar bonding strength greatly improved.

    Hello Lou Bang and Yuhong C90 tile adhesive which is good? It's also a good Lou Bang, dear.

  12. Anonymous users2024-02-05

    Hello, 1. The correct use of ceramic tile adhesive is to mix and stir the purchased tile adhesive and powder according to the comparison of product specifications. It is recommended to use an electric mixer, because it will cause uneven mixing and affect the effect of later use. 2. When coating the back adhesive paste, if it is a vitrified brick with a small specification, you can use a row of brushes to brush it.

    Don't just brush a little on both ends of the brick because of material saving, this will greatly reduce the effect of adhesive backing. It is important to pay attention to the uniform coating of the powder and the amount of thicker powder used, so that it is strong. Of course, for areas with a large amount of construction, you can also use a roller to brush tiles, which is not only convenient, but also fast.

    In order to prevent the mud from flowing from the sides of the brick from affecting the joint of the tiles, it is possible to leave an edge of 2 to 3 cm around the brick without coating. 3. The correct use of tile adhesive After the bricks are brushed, it is forbidden to put them in the sun or be wet by rain. It should be placed indoors against the wall as much as possible, and stand in turn.

    Gaskets are clamped between bricks to prevent mutual adhesion. If vitrified bricks are laid on the wall, brick joints need to be reserved to avoid the wall expansion stress caused by temperature changes in the later stage. It is recommended that special plastic joint mats or tile crosses can be used, but other materials can also be used.

    I hope my reply can help you, if you have any follow-up questions, please feel free to ask me, I will reply to your <> as soon as possible

Related questions
15 answers2024-08-12

Both are materials used to pave ceramic tiles, the main difference is that the product form and usage are different, the function of tile adhesive is similar to cement mortar but better than cement mortar, it can be used alone, but the adhesive should be used with tile adhesive, it will be more firm, especially for large tiles or floor tiles on the wall, it is more recommended to use adhesive; The landlord can learn about the brand of Keshun home waterproofing, which has tile adhesive and tile adhesive, and the adhesion is quite good, which is worth using. You can go yourself.

18 answers2024-08-12

Tile adhesive, tile adhesive silly can not be distinguished, tile adhesive and tile adhesive are different: the ingredients are different, the main components of tile adhesive are gravel, concrete calcium formate, styrene-butadiene rubber powder and its acrylic emulsion. The main components of ceramic tile back coating glue are moisturizing emulsion raw materials, inorganic silicates and their polymers. >>>More

6 answers2024-08-12

Tile adhesive and tile adhesive have different uses, different usage methods, different raw materials, different properties and appearances, and so on。Tile adhesive and tile adhesive sound like the same thing, in fact, they only have similar names, completely belong to two substances, no matter from which point of view are very different, once the use of the wrong, may lead to decoration has a lot of quality problems, it can be said that there are endless troubles. >>>More

12 answers2024-08-12

Mix the glue evenly, and do not have corn starch dough.

Method: 1. Mixing of vitrified brick adhesive. >>>More

9 answers2024-08-12

Don't be afraid, the tile adhesive is actually an acrylic water-based adhesive, which is not afraid of high temperature after curing, so there is no need to worry about this at all.