Summary of overhead crane accidents, how to write reflections on overhead crane accidents

Road Traffic Safety Law of the People's Republic of China Article 52 When a motor vehicle breaks down on the road and needs to be stopped for troubleshooting, the driver shall immediately turn on the hazard warning flashing lights and move the motor vehicle to a place that does not obstruct traffic; If it is difficult to move, the hazard warning flashing lights should be continuously turned on, and measures such as setting warning signs in the direction of incoming vehicles should be taken to expand the warning distance, and the police should be called quickly if necessary.

Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China Article 60 If a motor vehicle breaks down on the road or a traffic accident occurs, obstructing traffic and making it difficult to move, it shall turn on the hazard warning flashing lights in accordance with the provisions and set up warning signs 50 meters to 100 meters behind the vehicle, and at night shall also turn on the light lights and rear position lights at the same time.

Article 63 The following provisions shall be observed when a motor vehicle is temporarily parked on the road:

1) In the section with no parking signs and markings, in the section with isolation facilities between the motorway and the non-motorized lane, the sidewalk, as well as the pedestrian crossing, the construction section, shall not stop;

2) No parking is allowed at intersections, railway crossings, sharp bends, narrow roads with a width of less than 4 meters, bridges, steep slopes, tunnels, and road sections within 50 meters from the above places;

3) In front of bus stops, first-aid stations, gas stations, fire hydrants or fire brigades (stations) and road sections within 30 meters of the above-mentioned places, except for the use of the above-mentioned facilities, no parking is allowed;

4) Before the vehicle is stopped, the door shall not be opened and the person shall not get on and off, and the door shall not be opened or closed to obstruct the passage of other vehicles and pedestrians;

5) Roadside parking should be close to the right side of the road, motor vehicle drivers are not allowed to leave the car, get on and off personnel or load and unload items, immediately leave;

6) City buses are not allowed to stop at road sections other than the station to pick up and drop off passengers.

If you have not violated the above legal provisions, then the rear car is fully responsible, otherwise you are fully responsible.

Write the accident report above, what time, this detailed you should explain, I am driving in the case, someone overhaul the equipment, this time is not allowed to drive the crane, this time must stop the crane electricity, write out your feelings, the cause of the accident is many, including you, your electrician, the crane repairer is responsible.

If the car breaks down and stops on the road can not be exercised, the law stipulates that it should be double-flashed and prevent warning signs at a certain distance from the car, which is the triangular exclamation mark, if you operate in this way, then the rear car hits your car then he is fully responsible, if you do not operate like this, it may be the same responsibility or primary and secondary responsibility.

Dear leaders, colleagues! I am an employee of the enterprise crane, in the afternoon of May 10th, from the finished product workshop to transfer AA goods, to the bend of the logistics field, because I was careless, did not concentrate on driving, almost hit the past colleagues, for this reason, I assure the leaders and colleagues that in the future, I want to take this dangerous situation as a lesson, work hard, improve the technical level, get on the car to maintain a good mental state, strictly implement the national and company safety production regulations, to ensure the safe and efficient completion of the car operation task!

Hello, the above is the answer given, if my answer is helpful to you, please please praise my service Your praise is my biggest motivation to move forward, I wish you a happy life

How to write a reflection on a crane accident.

Hello, I'm glad to answer this question for you, I need a few minutes to sort out the information and disturb the typing, please be patient

Hello, overhead crane accident reflection reference writing: Dear leaders, colleagues! I am an employee of the enterprise crane, on the afternoon of May 10th, from the finished product workshop to transfer AA goods, to the bend of the logistics field, because I was careless, did not concentrate on driving, almost hit the past colleagues, for this Hu Yeying, I assure the leaders and colleagues, after this spine, I want to take this danger as a lesson, serious work pants, improve the technical level, get on the car to maintain a good mental state, strictly implement the national and company safety production regulations, to ensure the safe and efficient completion of the car operation task!

Hello, the above is the answer given, if my answer is helpful to you, please please praise my service Your praise is my biggest motivation to move forward, I wish you a happy life

Summary. Hello, for your question [how to write a crane accident report] This question is answered as follows. Overhead crane accident report grinding plate is; At 8:15 on August 22, 2006, when the maintenance personnel of the CC workshop were preparing to use compressed air to purge the 3 electrolytic crane control cabinet to cool the air conditioner, the overhead crane guide wheel scratched the maintenance personnel.

The preliminary analysis of the accident is reported as follows:

Hello, for your question [How to write a car accident report from Tianzhi Yin] This question is answered as follows. Overhead crane accident report grinding plate is; At 8:15 a.m. on August 22, 2006, when the maintenance personnel of the CC workshop were preparing to use compressed air to purge the 3 electrolytic crane control cabinet to cool the air conditioner, the overhead crane guide wheel scratched the maintenance personnel. The preliminary analysis of the accident is reported as follows:

Tie-in pins. There must be a responsible person and a first responsible person.

1. After the accident at 8 o'clock on August 22, CC workshop maintenance workers Ma and Li were ready to purge the cooling and air conditioning of the 3 electrolytic crane control cabinet parked at the 243 slot after routine inspection, when Li climbed on the crane rail beam platform, he lay on the ladder mouth to the crane worker Hao to move the crane to the north, and then Li walked north to prepare to dock the air duct and the compressed air duct joint, Hao immediately started the crane to move north after getting the signal, and Ma was climbing up the vertical ladder at this time, When the crane moved to the entrance of the vertical ladder, Ma's upper body was leaning out of the ladder and was crushed by the guide wheels of the crane. At this time, Chu Wei of the material ** center and the second electrolysis workshop were about to return to the North District Office after 5 days of car inspection, and Wang Qili, a maintenance worker who was about to return to the North District Office, passed through here, and immediately signaled Hao to stop after hearing the shouts of the personnel above, and the two were sent to the Yankuang Group General Hospital at 8:30. After a preliminary diagnosis, Ma had a pelvic fracture.

Second, the preliminary cause of the accident 1, the maintenance worker encountered such as Li in the absence of Ma in the case of illegal command of the crane worker Hao to move the crane, the work map is trouble-free, blind and brutal, is the main cause of the accident.

The accident report of overhead crane collision equipment must have a responsible person and the first responsible person.

No, it's normal to be responsible.

Determination of Accident Liability:

Summary. Hello! We're glad to answer your questions!

1. During the operation of the overhead crane, the main and auxiliary hook wire ropes are broken first, and the accident alarm is pulled to warn the ground personnel to stay away from the overhead crane. Then, move the crane smoothly and land on the nearest safe ground as soon as possible. After zui, notify the production department in time to coordinate with professional maintenance personnel to repair.

Hello! We're glad to answer your questions! 1. During the operation of the overhead crane, the main and auxiliary hook wire ropes are broken first, and the accident alarm is pulled to warn the ground personnel to stay away from the overhead crane.

Then, move the crane smoothly and land on the nearest safe ground as soon as possible. After this early encounter, notify the production department in time to coordinate with professional maintenance personnel to repair.

Hello! I'm glad to answer your questions! There is a kind of towering wooden building in Zigong, Yandu, which is a tall wooden building in China, known as the "Eiffel Brigade Tower" of the East.

The crane is a kind of "A-shaped" tower type wooden derrick standing at the mouth of the salt well well, which is 113 meters high, and is a miracle created by the people of Zigong in the history of Chinese architecture. The crane is connected by hundreds of round fir trees, and the bamboo rope is bundled to form a huge support, which is erected at the wellhead and used to lift and draw brine.

Mainly write about the main work content, achievements, and shortcomings, and finally put forward reasonable suggestions or new directions...

The work summary is to let the superior know what contribution you have made and reflect the value of your work. So several points should be written:

1. Your understanding of the position and work 2. What exactly you have done 3. How you work hard and what things you use your brain to solve. Even if it's nothing, write about some difficult questions and how you solved them with effort.

4. What abilities do you need to improve or what knowledge do you need to enrich in your future work?

5. Superiors like to take the initiative to work. You must be prepared for everything in your part, that is, the preparation work in advance is as follows for your reference:

Summarization is to conduct a comprehensive and systematic general evaluation and analysis of the situation in a period of time, and analyze achievements, shortcomings, and experience. Summarizing is a type of applied writing, which is the rational thinking of the work that has already been done.

The basic requirements for summarizing.

1 The summary must have an overview and description of the situation, some of which are relatively simple, and some of which are more detailed.

2 Achievements and shortcomings. This is the main thing to summarize. The purpose of summarizing is to affirm the achievements and find out the shortcomings. What are the achievements, how big are them, what are the aspects, and how they were achieved; The number of shortcomings, the aspects in which they manifest themselves, and how they arise should be clearly written.

3 Lessons learned. In order to facilitate future work, it is necessary to analyze, study, generalize, and form theoretical knowledge of previous work experience and lessons.

Notes on Summary:

1. We must seek truth from facts, and the achievements are basically not exaggerated, and the shortcomings are basically not reduced. This is the basis for analysis and drawing lessons.

2 Be organized. The sentences are smooth and easy to understand.

3 Be detailed. There are important and secondary, and the main points should be highlighted when writing. The questions in the summary should be prioritized and detailed.

Basic format of the summary:

1. Title. 2. Text.

Beginning: an overview of the situation, an overall evaluation; The outline is summarized and the whole text is summarized.

Subject: Analyze the shortcomings of the achievements and summarize the lessons learned.

Conclusion: Analyze the problem and clarify the direction.

3. Payment. Attribution and date.

You can relax and listen to the Internet or something.