How to bind books, how to bind books with thread

Updated on culture 2024-08-12
10 answers
  1. Anonymous users2024-02-16

    There are many ways to bind books, and I only know the following binding methods, I hope it can help you!

    1.Binding on horseback

    When you need to bind concisely, you'll find a saddle stitch. More suitable for smaller documents, saddle stitching is a fixed folded paper of paper.

    One of the easiest ways to do it. Think of it as a professional binding iteration for any cost-effective booklet, brochure, catalog, program, or magazine.

    2.Hot melt adhesive for book binding

    Hot melt adhesives

    It is a thermoplastic adhesive.

    In a certain temperature range, its physical state changes with temperature, while its chemical properties remain unchanged. Because it is solvent-free, non-polluting, non-toxic, it is an environmentally friendly chemical product, and the product itself is solid, which is easy to package, transport and store.

    Because of its fast processing speed, high production efficiency, short cycle, stable quality, low labor intensity, and binding, wireless bindings have become the main way of binding books and periodicals in China. At present, most of the hot melt adhesives used for wireless binding in books and periodicals in China are EVA hot melt adhesives.

    The colors of book glue are mainly milky white, transparent, light yellow, translucent, and dark yellow.

    According to the use, book adhesive is divided into side glue and back glue.

    According to the shape, book glue mainly includes cylindrical particles, round particles, and blocks.

    3.Hardcover or hardcover

    There is nothing more than a beautiful book that meets extremely high quality standards. Whether sewn from a single sheet or bound part, this sturdier option will ensure that your book becomes an enticing addition to any coffee table or bookcase. Although the cost of production of hardcover books or hardcover books.

    Higher, but they do boast a longer shelf life.

    and higher value.

    4.Sewing and binding

    Sewing is a beautiful traditional method of binding in which a thread (of any color) is sewn together through a folded page at the spine of a book. This secure binding method requires no adhesive or staples and is typically used for single-section books. The stitches can be seen both from the outside and neatly hidden.

    Inside. <>

    5.Segmented stitching binding

    As the name suggests, this type of binding is sewn along the spine section and glued together for a sturdy finish. Ideal for both small and large documents, segmented sewing allows you to lay your book flat, regardless of its number of pages.

    6.Comb or spiral binding

    A typical approach to business documents and school workbooks that involve simple loops and punches. But don't underestimate the power of wire, comb, or spiral binding. This option is very versatile and popular.

    7.Screw room binding

    Also known as Chicago.

    Screw-binding, this extremely durable printing finish is a great choice for any portfolio or office file. The holes are drilled with the highest precision and secured between the two cover plates with set screws. This binding style is a neater alternative to circular binding and still gives you the ability to add or remove pages as needed, which is great for restaurant menus and portfolios.

  2. Anonymous users2024-02-15

    Prepare needles and threads, iron clips. The four sides are neat, fix the left side of the picture (information) with a clip, set a point, according to the length of the book, (at least three points, mark with a pencil.) It is best to borrow a small electric drill, (hand drill is also OK, generally use a 2mm drill bit,) align the mark drill, and then use the line to perforate solidly, it is best to smear the binding line (book back) part with glue, (can not use paste, it will be wormed for a long time.)

    Finally, paste the cut cover paper.

    If you want a hardcover, print the title you designed on the cover, so that the bound book is a hardcover.

    Circle: The back of the book is perforated.

    3. Glue binding: divided into wireless glue binding and sewing glue binding (better than wireless firmness) 4. Hardcover: square back and round back.

    If the emphasis is commonly used.

    I guess you're talking about books sold in bookstores.

    Or the textbooks used by students are mainly wireless glue-bound and thin, and there are many thin exercise books.

    The paper is very thick (200-250g coated paper), and the sewing thread is glued.

    If it requires cardboard, it is hardcover.

    It should be wireless.

  3. Anonymous users2024-02-14

    Generally, you can use a glue binding machineA4 paperBound into a book. The equipment needed is the glue binding machineThe steps of the glue binder to make the guess vertical use are as follows:

    Equipment Required: Glue binder.

    The second step is to put it into the heating tank hall banquet: after the large indicator light of the waiting ear is on, put the hot melt envelope into the heating tank.

    The third step, hot melt: push the sliding groove to clamp the hot melt sleeve, and wait for the machine to make a humming sound before you can take out the sleeve.

  4. Anonymous users2024-02-13

    Binding books with thread need to be prepared as follows: pages, hammers, needles and threads, nails, and the detailed operation methods are as follows

    2. Next, use a ruler to draw the position of the perforation on the side of the page, as shown in the figure below.

    3. Next, use a hammer and nails to pierce the painted position, as shown in the figure below.

    4. You can start threading below, and it should be noted that you should sew from the beginning, as shown in the figure below.

    5. Next, after sewing the upper left corner, you can sew it alternately anyway, as shown in the figure below.

    6. Wait until the end of the sewing and then sew it back, and sew the place without thread on the line, as shown in the figure below.

    7. Wait until the beginning of the sewing and knot with the beginning of the thread, see the figure below.

    8. Finally, the binding book is completed with thread, as shown in the figure below.

  5. Anonymous users2024-02-12

    I pierce the hole with an awl, and I can also bring out the thread. The thread can be made of coarse cotton, or something else that is stronger and thicker. If you don't have an awl at home, it will only cost a few dollars to buy one, and the cost is much lower than buying a professional nail loader.

  6. Anonymous users2024-02-11

    You can go to the stationery store and buy a binding machine, the kind that has a semi-automatic direct line.

  7. Anonymous users2024-02-10

    Ankang broke the tetanus national tetanus broke the plane break.

  8. Anonymous users2024-02-09

    1) Horseback riding. The pages of the book are only connected by two wire nails, because the wire is easy to rust, so the fastness is poor. Suitable for ordering books and periodicals with less than 6 sheets.

    2) Flat ordering. Because the iron wire is easy to rust and the pages are loose, it is rarely used now. In addition, flat binding must occupy a certain width of staple, so that the pages can only be "not fully opened", and the book is too thick to be easy to read, which is generally suitable for books and periodicals below 400 pages.

    3) Locking the thread. Also known as string binding, although the book block is relatively firm, due to the more stitching on the back of the book, the flatness is poor.

    4) Cordless adhesive binding. It is also called glueback binding and adhesive binding. Due to its good flatness, a large number of books and periodicals are currently bound in this way.

    However, due to the fact that there is no corresponding industry standard or national standard for the quality of hot melt adhesive, and the use method is not standardized, the quality of glued books has not reached a satisfactory level.

    5) Sewing glue back binding. It is also called sewing glue binding, and each book is first locked and then glued when binding, and the back is no longer milled when gluing. This binding method produces strong and flat books, and there are many books that use this method.

    6) Plastic wire ironing. This is a relatively advanced binding method, which is characterized by the fact that the bookmark in the book block is bonded twice and the land stool type, and the function of the first bonding is to glue the plastic wire binding foot with the bookmark paper, so that the pages in the bookmark can be fixed; The second bonding is to bond the book block of the plastic wire hot binding into the book block through wireless adhesive binding, and the book block of this method is very firm, and because there is no need to mill the back and beat the hair, the influence of poor gum quality on the binding quality is reduced. As early as the mid-70s of the 20th century, plastic wire ironing was introduced into China by Germany (the former East Germany), and it was not popularized and applied in the mainland for various reasons.

    But in other countries of the world, this binding technique is more widely used.

  9. Anonymous users2024-02-08

    How to bind books by hand. If you are interested, come and find out.

    Thicker needles, some colored threads, binding punches.

    01 We first have to prepare a thicker needle, some stronger color wire, it is better to have a binding punch, if you want to bind thicker books, you need to bind a punch, because it is too laborious to do it manually.

    02 We first need to align the paper, which can be clamped with a clip.

    03 Then use a ruler to calculate the length of the holes, and then calculate the hole spacing you want, which should be more even.

    04 After the calculation, you can punch the holes, and then take some thicker targets to pad.

    05 After everything is ready, we will start sewing, and the threads must be tied tightly and neatly in the process.

    06 Finally, you can tidy up the thread.

  10. Anonymous users2024-02-07

    1. Typesetting. A4 double-sided printing is used to fold four plates in half into A5 format.

    2. Printing. 1. Try to choose the best printer, do not use inkjet elimination.

    2. Adjust and adjust the printing settings before printing, and print one or two pages to see the effect to avoid waste.

    3. Adjust the printing area, margins and other settings, and try to fill the entire noisy rock paper with useful content, so as to make up for the lack of promotion points that the A5 format is too small.

    3. Fold in half. 1. Ensure that the paper is aligned after folding.

    2. Use the A4 fold method, as long as you are careful when folding, the folded paper does not need to be cut.

    Fourth, binding. Punches and hoops are required to pass manual wire binding, iron wire binding, riding staple, and glue staple.

Related questions
2 answers2024-08-12

Although many people may be reluctant to read books, how to show others the literary temperament of portrait photos with the help of books in portrait photography? Especially for girls, photographing literary style is a very simple way to shoot, and the following has sorted out the methods of taking pictures with the help of books to shoot literary temperament. >>>More