-
It may be that the battery is dead, or there is a problem with the stove, unreasonable cooking method, and the soup that overflows when cooking is left in the natural gas stove, which may affect the normal use of natural gas and cannot ignite.
-
The reason why the natural gas stove can't catch fire first depends on whether there is no gas, and if there is no gas, it means that the gas is out of gas and can only wait for the gas company to supply gas. If there is gas that does not ignite, it should be that the battery is out of power, and you only need to replace the battery. The battery may be caused by poor contact, see if there is rust on the two poles of the battery box, clean up the rust and connect it to see.
In addition, it is also possible that the pipeline is blocked, or the air outlet is blocked, and it is necessary to pay attention to check and dredge whether there are debris blocking the air delivery hole.
-
First, the natural gas nozzle is sucked in, second, the battery is dead, third, the gas is not up, fourth, the natural gas in your own home is finished, and fifth, there is a problem with the stove.
-
Natural gas may not catch fire for a number of reasons: a dead battery, a problem with a natural gas pipeline, or a loose or even closed valve. For example, when the meter battery is out of power, the natural gas stove just can't ignite, and after we replace the battery, we can turn the natural gas valve switch.
-
1. First of all, it may be because the natural gas is gone, at this time, you can check whether there is still natural gas, if not, add it.
2. If the battery of the natural gas stove has no electricity, then it is naturally impossible to catch fire, at this time we can ask the master of the natural gas stove to come to see the battery, if it is the cause of the battery cultivation, it will be replaced.
3. When the pipeline of the natural gas stove transporting natural gas is blocked, the natural gas has no way to reach the ignition device, so it is impossible to ignite it when ignition, and the pipeline should be dredged or replaced at this time. Here is a reminder that if you do not have any experience in repairing natural gas stoves, for the sake of your own personal safety, it is best not to operate it yourself, or it is better to ask professional maintenance personnel to come to help.
What are the reasons why the flame of a gas stove does not last.
Reason 1: The battery may be about to run out of power, it is recommended to replace the battery to check;
Reason 2: If the switch is not rotated in place, it is recommended to press the ignition sign to rotate the button;
The original socks are due to three: the adjustment damper is too large, resulting in too much oxygen, and the pulse of the gas stove is damaged. If the damper is too large, check and adjust it, and if the pulse is damaged, ask the maintenance master to repair it.
Reason 4: The ignition needle and flame-out protection needle are sticky with dirt, it is recommended to check whether the ignition needle or flame-out protection needle is covered by dirt, and wipe it clean with a dry towel.
What is the difference between a natural gas stove and a gas stove.
First of all, the former uses natural gas, while the latter uses liquefied petroleum gas, and this essential difference also causes other differences, such as the diameter of the hole from which the gas is ejected. The diameter of the hole is related to the pressure of the gas, almost inversely proportional, because the pressure of natural gas is small, so the diameter of its hole is large, and the pressure of LPG is large, so the diameter of its hole is small. Secondly, natural gas burns more thoroughly and contains fewer impurities, so it is more environmentally friendly; On the contrary, liquefied petroleum gas is very polluting to the environment.
-
1. Reason: The air source is turned off and not turned on, which is often ignored by us. Sometimes it may be carelessly turned off, or there is no gas, which will cause the natural gas to not ignite.
Solution: If there is no gas in the gas stove, you should prepare to add gas at this time.
2. Reason: to see whether the battery has electricity, this is also a common problem, and it is also a common concern of people.
Solution: If the battery of the gas stove has run out, then you only need to replace the ordinary No. 1 battery and continue to use it.
3. Reason: Pipeline blockage is also a common problem, generally speaking, you can smell the smell of gas, but the gas stove cannot catch fire, then it is likely to be gas blockage.
Solution: If the pipe of the gas stove is blocked, unblock the pipe or replace it with a new one.
4. Reason: Many gas stoves have overvoltage protection function, and once overvoltage, it will not start.
Solution: If the gas stove is overpressure protected, then you need to change a pressure reducing valve to try.
5. Reason: The kitchen is a place that is easy to get dirty, especially easy to be contaminated with oil, etc., if the gas stove is placed for too long, the ignition needle will be easily stained by the oil, and then the natural gas will not catch fire.
Solution: At this time, you need to clean the grease from the ignition needle, and then try to ignite it.
-
Summary. Hello, one, insufficient power If you find that the natural gas stove can not be ignited normally or cannot ignite, the most likely reason is "insufficient battery power", although the stove burns by liquefied gas, but the igniter is powered by the battery, generally No. 5 battery. In this case, you can try to replace the battery, and you can ignite normally.
Hello, first, if the power is insufficient, if you find that the natural gas stove can not be ignited normally or can not catch fire in the rock bush, the most likely reason is "insufficient battery", although the burning of the Zaohe Zao Brigade relies on liquefied gas, but the igniter power supply relies on the power supply of the electric meditation bench pool, generally No. 5 battery. In this case, you can try to replace the battery, and you can ignite normally.
Second, the fire cover (fire core) problem may be many friends do not know what is the "fire cover (fire core)", it is the liquefied gas stove in the middle of the cover, this cover can be removed, in addition to convenient cleaning, but also to control the direction of the liquefied gas spray, if the cover is lost, it will lead to the liquefied gas stove can not catch fire. In this case, you can directly buy a fire cover (fire core) through online or offline stores (fire cover is also called fire core, and there are many kinds of structures and styles). Debate Bird Search.
Third, the pressure ring problem liquefied gas cooktop electric fire is based on the arc emitted by the igniter, and the stove imitation liquefied gas cooktop in the moment of electric fire, will spray a large amount of gas through the hole of the stove, if there is no pressure ring, the arc can not completely ignite all the holes of the hidden fiber hole sprayed out of the liquefied gas, even if part of the liquefied gas, it will be extinguished by other unignited liquefied gas. In this case, you can check the lower pressure ring, if there is no pressure ring, you can directly buy one and install it (the pressure coil must be flat).
Fourth, the distance problem igniter relies on the switch control of the liquefied gas cooktop, but the arc relies on the ignition needle to pass to the cooktop (pressure ring), many friends in the use of liquefied gas to flush the stove, not friends Yuan Jian carefully touched the ignition needle, or the use of mismatched fire cover, will cause the ignition needle to be far away from the cooktop, can not directly trigger the electric fire, but this situation is relatively rare, it is not excluded that the ignition needle has a problem with the cracking miracle, correct the ignition needle or directly replace it.
-
1. Safety valve.
Normally speaking, the liquefied gas either can not ignite, or will not be extinguished after the fire, if the fire is not extinguished immediately, most of the gas supply is not continuous, and the most common problem is that the "safety valve" is not fully opened, in this case, the liquefied gas switch can be closed, and then twist the safety valve, the safety valve is completely opened, and then try to ignite.
Second, the hose is bent.
If it is determined that the safety valve has been fully opened and the problem still exists, then it may be caused by the bending of the gas supply hose, most of the liquefied gas connected to the gas stove are thin hoses, limited by the use environment, the intake hose may be bent, affecting the normal gas supply, there will be a situation of "ignition and extinguishing after a while". In this case, you can flip the bend over.
3. Failure of the intake valve.
Many friends may think that there are only two valves for liquefied gas stoves, one is the valve switch for ignition and fire control, and the other is a safety valve, but in fact there is a third valve, which is generally located at the bottom of the liquefied gas, and the number of stoves determines the number of valves. In this case, you can open the intake valve a little wider, and it can return to normal.
Fourth, the fire outlet is blocked.
In addition to the above reasons, there is also a situation that the fire outlet is blocked, although the liquefied gas does not contain impurities, but in the process of stir-frying, it is inevitable that some oil stains and food residues will be sputtered, these residues may remain at the fire outlet of the liquefied gas, resulting in the process of liquefied gas combustion can not be completely combined with the oxygen in the air for combustion, the light will be detonated, and the heavy will appear in this situation, this is because the user has not cleaned the liquefied gas stove for a long time, and it can be restored to normal after cleaning.
Conclusion: In addition, there is a situation that the liquefied gas is used up or the liquefied gas is not pure, the pressure is not enough, etc., which will also lead to the emergence of such a situation.
-
Natural gas stoves are essential tools for cooking good food, and they are closely related to our lives. Gas stove is a tool, in the process of use will inevitably appear some problems affect the use, so everyone should have a considerable degree of understanding of some problems that often occur in the gas stove, which is the common problem is that the gas stove can not catch fire, in such a situation should not be in a hurry to ask the repair master to repair, should find out why the gas stove can not catch fire, what to do if the gas stove does not catch fire? If you don't understand, don't worry, let's give you a detailed introduction.
Reasons why natural gas stoves don't ignite: There are many reasons why natural gas can't catch fire, let's count them together. 1. The pulse igniter has no battery, or the battery is out of power; 2. The gas source switch of the natural gas stove is not turned on or the air pressure is insufficient; 3. The ignition click of the natural gas stove and the distance of the induction electrode are not suitable or there is pollution around it, and the hole is blocked; 4. The air pressure of the natural gas stove is too high, which causes the gas flow rate to be too fast and impact the electric spark; 5. The ignition nozzle of the natural gas stove is too large, which will cause too much airflow and impact the electric spark; 6. There are cobwebs in front of the ignition nozzle or in the ignition support; 7. The hose of the natural gas stove is twisted or blocked.
The solution to the natural gas stove not igniting Solution 1: When the natural gas stove does not ignite, we must first check whether the gas source is stable, and then check whether the pulse ignition is normal, if there is no ignition sound, then the components should be replaced; Then check whether the ignition needle is positioned properly, if the ignition needle is deformed, it will also cause the natural gas stove to not ignite; Fourth, we need to check whether the inside of the igniter is working properly; Check the valve body damper of the natural gas stove, if it is adjusted too much, it will not ignite, we can adjust the damper left and right, and try whether the ignition is normal. Workaround 2:
If the natural gas stove needs to be ignited several times in a row to be successful, this situation belongs to the gas stove with thermocouple induction, due to the long-term use of the thermocouple aging, then only the replacement of the thermocouple induction needle can be solved; Sometimes the ignition is sometimes normal and sometimes abnormal, and this situation is mainly due to the poor contact of the pulse ignition micro switch, and the pulse ignition micro switch is adjusted to solve the problem. Solution 3: Sometimes you will encounter a natural gas stove with a normal burner and an abnormal burner, and there is no spark at all on the abnormal side, then it means that one of the high-voltage packets in the electricity and Changzi pulse is burned out, so at this time, the only way to solve it is to replace the pulse.
The above is to introduce to you about the natural gas stove can not catch fire is what causes, I believe you should know what to do in this situation after reading it, no longer worry about the natural gas stove can not catch fire, we find out what is wrong with the natural gas stove according to these methods, eliminate the general failure, if these should pay attention to the place, pay attention to it to solve the problem, if it still can't be solved, then you can only find a professional master to repair, In fact, most gas stoves will have these possibilities, and it is easy to solve them by mastering these methods.
The reasons why the natural gas stove does not catch fire are as follows:1. When the gas stove battery is out of power and cannot catch fire, you can check whether the battery has electricity, if there is no electricity, not only can it not ignite but also the solenoid valve will not open. >>>More
If the natural gas stove does not catch fire, follow the following steps to check and operate: >>>More
Let's rule out a few points first, if not, replace the battery. >>>More
The correct way is to turn off the heat first, then the gas. Pinch the switch with your hand and turn it clockwise, wait for the fire in the hob to go out, then let go, and finally close the valve. Because the gas stove can be used during use, the flame size can be adjusted through the button, and the valve on the gas pipeline is mainly used to control the natural gas, if the valve is closed before the fire is turned off, then the fire will drill into the pipeline, which will cause a safety accident. >>>More
The liquefied gas stove can't catch fire and ask for help.