There are several situations in which the gas stove does not catch fire, and how should it be solved

When the gas stove cannot be ignited, the first thing to consider is whether the gas source is sufficient. If there is no gas, there will be no spark when the switch is turned on. There are several possibilities for this to happen, and it is possible that the gas pipeline is clogged and the gas cannot be reached.

There is also a possibility that because of an emergency, the gas company closed the natural gas ** valve. At this time, we can first check the gas meter to see if it is in normal working condition. If it shows that it is not in normal working condition, you can call a staff member to come for repair.

Second, the gas stove battery is exhaustedFor families, the exhaustion of the gas stove battery is also one of the reasons why it cannot be ignited. This should be considered when ignition is observed when there is no sound but no flame appears. The battery only needs to be replaced and the gas stove can be reused.

3. Poor contact of the non-circuit in the gas stove If the ignition is still not successful when both gas and electricity are available, you can check the internal wiring and whether the two poles of the battery box are rusty and have poor contact. This is because the inside of the gas stove often has some circuits, which are easy to cause poor contact under long-term oxidation. In this case, it is only necessary to remove the rust and eliminate the poorly touched parts, and it can be used again.

The following situations will make the gas stove not ignite, and repair it for these reasons.

The battery is low.

The ignition component is damaged.

The gas pressure is insufficient.

The valve is faulty.

Reasons why the gas stove cannot ignite: 1. Valve body failure 2. Low ignition position 3. Gas pressure too low 4. Valve body blockage 5. Battery failure Supplementary information: Find the cause and solution:

First of all, make sure that the air source switch is open, check whether the connecting hose is flattened or bent, pick up the pot holder, and see if there is fire at the ignition nozzle. 1. If not.

If the gas stove does not catch fire, if it does not ignite, see if the discharge needle is discharged; If the discharge needle does not discharge, it means that the discharge needle is faulty and the discharge needle should be replaced. If the discharge needle is discharged, it means that the valve body is faulty and the valve body should be replaced. Extended InformationPrecautions for the use of gas stoves:

1. According to national regulations, the service life of household stoves is 8 years, and users should scrap them in time after expiration to avoid hidden dangers. 2. Always check whether the interface of the gas supply pipeline is leaking, whether the rubber hose is in good condition, whether there are cracks in aging, and once found, it should be replaced in time. 3. Users who use stoves should regularly clean the fire holes on the fire cover to prevent blockage, and should frequently clean up dust, cobwebs and other debris in the stove.

4. After the stove fire cover is damaged, you must buy the original product and cannot replace it at will, so as not to cause poor combustion state. 5. When the intake hose is used for a long time, it will be aged or damaged, forming a potential safety hazard. Therefore, when the intake hose is aging, it should be replaced in time, and it must not be repaired with adhesive tape and continued to be used.

6. Users who use artificial gas or other special gas sources must frequently clean the fire holes on the fire cover to avoid blockage. 7. The gas source is different, and the gas stove used should also be different, which should be noted when purchasing. If the gas source used has changed, be sure to ask the original manufacturer to make corresponding modifications to the stove before it can be used.

8. In case of leakage or extinguishing of the flame due to accidental reasons (wind blowing, water overflow, etc.), the main switch of the gas source should be turned off immediately, the doors and windows should be opened, and the ventilation should be quickly ventilated.

First of all, look at whether it is ventilated, and secondly, whether it is fired. Under normal circumstances, the gas stove is fine, just these two problems.

1.Ignition needle position.

2.Poor circuit contact.

It is recommended to find an after-sales service or property to see.

1. What should I do if the gas stove can't catch fire?

1. When the gas stove does not catch fire, you first need to find the problem. Check whether there is gas first, if not, you need to add it in time.

2. If it is a pulse type, it may be that the battery is not charged, you only need to open the cabin box at the bottom of the gas stove and replace it with a new battery.

3. If the above has been dealt with, but it still can't ignite, it may also be that the line contact is poor. The gas hob can be lifted up, the rust removed, and the lines reconnected into place. And aim the ignition needle at the gas outlet of the fire cover, and dredge the rusty area inside with a toothpick.

4. If it still can't be solved, it may be that there is a problem with the ignition needle, and you need to replace it with a new ignition needle and try it again. Regular home maintenance, just find a woodpecker for free** repair.

The reasons why the gas stove can't catch fire are: 1. Gas problemThe fuel used in the gas stove is gas, if there is a problem with the gas **, then the gas stove can't catch fire. As for the problem of gas **, most of the time it is a lack of gas balance.

Of course, there are also temporary emergency repairs and gas outages of pipeline gas, gas valves at home that are not opened, and so on. Pay special attention to one item, that is, if you use a gas alarm with an automatic shut-off valve, the shut-off valve will automatically cut off the gas due to false alarms**. These are all problems with gas**, and they are also an additional reason why the gas stove does not catch fire.

2. The battery power of the gas stove is low, and the current gas stove is electronic pulse ignition, when the battery is insufficient and cannot produce electric sparks normally, it will not be able to ignite, which everyone may know. However, there is another situation, that is, when the battery power of the gas stove is relatively low, it can still make an electric spark, but the gas stove cannot ignite. In fact, this is because the battery of the gas stove is low, which is not enough to open the solenoid valve of the gas stove, so it cannot ignite, which is also a puzzling, and there is indeed a relatively common reason why the gas stove cannot ignite.

3. The gas stove itself is faulty, and the gas stove itself is faulty, and it may not catch fire. One of the more common reasons for this is that there is a problem with the automatic flame-out protection device of the gas stove. For example, the probe of the automatic flame-out protection device is dirty, and the probe connection is false.

There are also reasons such as the blockage of the fire hole at the probe of the gas stove head. Of course, there are also gas stoves that have damaged ignition systems, solenoid valves that are stuck, ignition switches that are faulty, etc., but they are not common.

Why can't the gas stove catch fire? 1.The air supply switch is off.

Everyone has negligence, if the air source switch is not turned on, it may not be turned on, so at the beginning of the repair, you must first find the reason to ensure that the power switch is turned on when the ignition. 2.The connecting hose is flattened or bent.

After the gas stove is used for a long time, the connecting hose is easy to be flattened, which will cause the gas to flow out normally and affect the ignition. Therefore, when the gas stove does not catch fire, this cause should be investigated. 3.

Discharge needle failure. Many people may not know about the discharge needle, but it will affect the ignition, so if the ignition fails, you can consider the reason why the discharge needle does not discharge. 4.

The ignition position is on the high side. Generally, the position of the igniter should not be too high, if it is too high, there may also be ignition failure, and this cause should also be investigated when checking.

The boss gas stove can't catch fire 10 solutions and the reasons why it can't catch fire Explanation: 1If there is no gas, the gas valve can be opened.

2.The battery is dead, just need to replace it with a normal No. 1 battery. 3.

If the circuit contact is poor, the rust needs to be removed, and the line is accurately connected, which can be directly removed or repaired. 4.Overpressure protection, once the overpressure will not start, then you need to change a pressure reducing valve to try.

5.If the pipe is clogged, then the pipe should be unblocked or replaced. 6.

The micro switch is damaged, and this situation can only be repaired. 7.The ignition needle is dirty, and you need to clean the grease of the ignition needle before trying to ignite it.

8.If the ignition pin is not properly positioned, once it deviates too far away, it will cause the stove to not ignite. In general, the distance between the ignition needle and the fire cover is 4-6mm, and it should be aimed at the fire hole.

9.The high-voltage line of the stove is aging, and only a set of high-voltage protection needs to be added at this time, which needs to be repaired.

Hope it helps, give it a thumbs up! Thank you!

There are many reasons why a gas stove won't catch fire, what should I do? Let's talk about some of the situations in which we can solve this problem on our own.

1) Arrears of gas stove bills. Sometimes check this and that, and in the end it will be found that the gas bill has not been paid, which is the easiest situation to solve, so first make sure that you have forgotten to pay the gas bill, and you can recover if you don't pay it in time.

2) The battery is low. If the gas stove ignites for a few seconds and automatically extinguishes, it is likely that the battery is insufficient, if it does not burn directly and the lighter has no electric light, it is also the battery is dead, this situation only needs to change the battery, it is recommended to change the battery when changing the battery, such as Fenglan No. 1 gas stove battery can be used for almost a year, which can reduce the number of battery changes.

3) There is dirt on the ignition needle. Just clean the dirt and dirt.

4) The ignition protection needle is crooked. Straighten the ignition pin and bring it back to its original position.

5) The fire cover nozzle is blocked. Just cover the fire and unblock all those little spouts.

The most common situation is that the battery of the gas stove is dead, or the gas is in arrears and there is no gas. This is the best solution, replace the battery, renew the gas.

Other complicated situations are that the gas stove may fail, perhaps because the overvoltage protection is automatically turned on, or it may be that the circuit is in poor contact; Dirty or displacement of the ignition needle may also cause the ignition to not ignite. There is also the possibility of a clogged pipe. However, in these cases, it is recommended to find professional maintenance personnel to come over for inspection and maintenance, and do not take the initiative to disassemble the machine for self-inspection without authorization.

If the gas stove does not catch fire, first check whether the power supply (battery) is dead or the battery is insufficient, and also check whether the gas is not opened, or the gas is not open (the pipeline is blocked or the solenoid valve is faulty, etc.), or there is no electric spark (the ignition circuit is faulty, there is no high voltage, and no electric spark can be generated, or the high voltage is short-circuited), or the ignition time is insufficient (the thermoelectric potential is low, and the solenoid valve conduction gas supply cannot be maintained) ......For many reasons, it will not be able to ignite the fire. It needs to be inspected and repaired by a professional.

Four reasons. The first is that if the battery is out of power, the second may be temporarily out of gas, the third gas stove valve is automatically closed, just pull it out with your hands, and the fourth is to clean up the water and dry it before you can start the fire.

The gas stove can't catch fire, so there are many reasons, is the gas stove out of gas? Or is there no electricity? Or the ignition head is broken, this is or the ignition head is broken, this is not on fire, you can contact the store that bought the original anger, you can contact the store that bought the original gas, they have after-sales, let the after-sales service deal with it for you, it will be fine.

What should I do if the gas stove doesn't catch fire? The main reason is that there is no battery, one is that the rock gas is gone, and the other is that there is no battery. As long as there is gas, she can fight.

There are many reasons why you can't catch fire, first of all, you have to make sure that there is gas (how to make sure that there is gas without me to teach you), and secondly, use a match to light the fire and try to ignite the gas stove.

Under normal circumstances, the battery is out of power, and it is solved by replacing it with a new battery.

There are several situations in which the gas stove does not catch fire, and how should it be solved?

It may be that the battery is dead or leaking and damaged, and it needs to be replaced. It may be that the ignition pin of the gas stove is crooked, and it needs to be adjusted so that it is opposite the gas outlet. It may be caused by the distance of the Inner Flame Cover and needs to be adjusted.

It may be that the ignition needle is rusty and corroded, and it is recommended to use an iron piece to grind the ruler or replace the ignition needle. It may be that the nozzle hole is blocked, and it is recommended to unclog it with wire or a fine needle.

1. Overpressure protection of gas stove.

If the gas stove is overpressure protected, then you need to change the pressure reducing valve to try. Pipe blockage: This is a very common problem, once the pipe is blocked, it is necessary to check the gas outlet valve, generally speaking, you can smell the gas smell and the gas stove does not catch fire, it is likely to be gas blockage.

Solution: If the gas stove pipe is blocked, then the pipe should be unblocked or replaced.

2. Cover the lighter needle with oil stains.

The fire cover spout should be unblocked, and the blockage will cause the fire not to ignite. Neglect to clean the gas stove may also lead to the failure to ignite, and people who are careful and have a habit of cleanliness may not have this problem, so it is recommended to clean the gas stove every once in a while. If it's not the ignition needle, then see if the battery is dead or loose.

Turn the gas stove over, a small box at the bottom is the place where the battery is placed, replace the new battery and then see if it can ignite, the ignition needle is covered by oil, affecting the temperature transmission, at this time there will be a situation that can ignite, but it will be extinguished as soon as you let go. Check to see if the ignition needle is clean and clean, clean up the covered oil, and then light the fire to see.

3. The gas stove has a high-voltage line and its connection.

The gas stove has a high-voltage line and its connection, once the high-voltage line is aging, it is easy to make the gas stove can not catch fire. Solution: At this time, only a set of high-voltage protection is required, which should be observed more in ordinary life.

The gas stove does not catch fire, either because the line connecting to the natural gas is blocked and there is no gas, or there is a problem with the lighter and battery, which cannot produce sparks and make the gas stove work normally. Of course, it is not ruled out that the solenoid valve of some gas stoves is faulty, and the natural gas inlet is closed, resulting in the gas stove not catching fire.

Solutions to the above problems, one. After turning off the fire control switch of the gas stove for inspection, check whether the air intake switch and the entrance switch of the gas stove are open, if not, turn on the air intake switch and the entrance switch of the gas stove to try to ignite;

Two. Close the intake valve, then turn on the fire control switch to see if there is a spark from the lighter, if not, then you need to replace the battery on the cooktop, or replace the lighter.

Three. The air inlet and nozzle inside the pressure regulator are blocked by rust, which hinders the outflow of gas in the bottle, and it is recommended to replace a qualified pressure regulator; The fourth point is that the fire hole of the burner cover is blocked by dirt, which hinders the flow of mixed gas in the burner.

Four. The automatic flame-out function of the solenoid valve of the gas stove fails, and the wiring gasket in the valve body cannot be energized, resulting in the solenoid valve of the gas stove not working. This requires a professional maintenance personnel to repair or replace a new valve body.

Friends with strong hands-on ability can update a valve body by themselves. After changing the solenoid valve, you can use thick soapy water to check whether there is air leakage.