Does the wall hung boiler dissipate heat, and how many degrees is the temperature?

1.In the initial stage of heating, I personally recommend that you put a wall-hung stove.

The temperature is set at around 60. Therefore, the wall-hung boiler should use a large amount of fire to boil hot water, so that our indoor temperature can rise quickly.

2.During the day in winter, because the temperature in our house is not very low, and people in our house do not always stay indoors, my personal opinion is that the outlet temperature of the wall-hung boiler should be set at 40. This is low-temperature operation, which saves a lot of gas.

3. In winter evening, it is recommended to set the water temperature of the wall-hung boiler to 55 at this time. Because according to a large number of empirical data, if the water temperature of the gas can reach 55 when the wall-hung boiler is heating, then the indoor temperature can basically reach more than 22.

In the cold winter months, if you want to ensure that the indoor temperature of your home can reach 20 degrees Celsius, the temperature of your wall-hung boiler needs to reach at least 40 degrees Celsius to maintain the indoor temperature by dissipating heat.

When using a wall-hung boiler, the temperature should be adjusted to the appropriate range, if it is adjusted to 40 degrees, the water temperature is relatively low, and it does not take gas. Many people have a misunderstanding that the temperature can be adjusted lower to achieve the purpose of saving gas.

The heat dissipation of the wall-hung boiler needs to be between 55 and 60 degrees, the specific situation needs to be adjusted according to the size of your room and the insulation effect, if you find that the temperature is set at 55 degrees, the indoor temperature has exceeded 20 degrees, then the temperature of the wall-hung boiler is appropriately reduced, so that the indoor temperature is controlled at 20 degrees, if the indoor temperature has not reached 20 degrees, you need to increase the temperature until the indoor temperature has 20 degrees.

The heat dissipation of the wall-hung boiler needs to be between 55 and 60 degrees, and the indoor temperature has exceeded 20 degrees, so it is necessary to appropriately reduce the temperature of the wall-hung boiler to control the indoor temperature at 20 degrees, and the indoor temperature has not yet reached 20 degrees, so it is necessary to increase the temperature until the indoor temperature is 20 degrees.

The normal is 90 degrees, and your situation should be the cause of overheating of the wall-hung boiler.

1. There is air in the heating pipeline, which causes intermittent dry burning of the wall-hung boiler;

2. There are debris in the heating pipeline, which causes the system to circulate poorly;

3. The water pump is stuck, and the water is not circulating;

The wall-hung boiler does have the phenomenon of heat dissipation, generally its heat dissipation is between 55 and 60 degrees, according to the size of your room, the insulation effect to adjust, if the room is set to 55 degrees, the indoor temperature has exceeded 20 degrees, then appropriately reduce the temperature of the wall-hung boiler, so that the temperature is controlled at 20 degrees, so that the room will be more comfortable.

The wall-hung boiler heating is a radiant heat dissipation method, which heats up evenly, the temperature is constant, healthy and comfortable, warm and pleasant. The heat dissipation points are located in all corners, and the temperature can be controlled in different areas, and the user can freely set the room temperature and start and stop time.

The wall-hung stove with radiators can be set to about 70 degrees, and with floor heating, it can be set to about 50 degrees. In the non-heating season, the water heater is set at the same temperature, around 40 or 45 degrees is very suitable.

The indoor temperature of the wall-hung boiler should be adjusted to about 15. If you are not at home, the wall-hung boiler is kept at the lowest level, that is, about 8 degrees Celsius, and when you go home, it is best to set the indoor temperature between 18 and 22 degrees, and if there are elderly and children at home, it can be two degrees higher.

Wall-hung boiler heat dissipation.

The heat dissipation of the wall-hung boiler needs to be between 55 and 60 degrees, and the specific situation needs to be adjusted according to the size of your room and the insulation effect.

It's heat dissipating. The temperature is usually between 55 and 60 degrees. This also has something to do with the size of the room and the insulation.

Normally, the water temperature of the floor heating should be set to 40 50, and the radiator water temperature should be set to 50 60.

Wall-hung boilerSet the domestic hot water, the temperature is recommended to be set between 40-50; It can be set at 50 degrees in winter and 40 degrees in summer.

It is not recommended to set the temperature too high, because the water pipes at home are made of PPR material, and if the temperature is too high, it will have a certain impact on the life of the water pipes. Secondly, when the water temperature exceeds 60, the wall-hung boiler continues to work under overload, which will directly affect the service life, and at the same time, the possibility of internal fouling will increase, and if the fouling is done, it will also have an impact on the heat exchange efficiency of the equipment.

Heating temperature: 1. Radiator heating.

Radiator systems, due to the characteristics of their radiators, it is recommended to set the temperature at 50 60 .

2. Floor heating.

It is appropriate to set the water supply temperature at 45, which can bring the room temperature to around 20, which is a relatively comfortable temperature.

The indoor temperature of the wall-hung boiler should be adjusted to about 15.

If you are not at home, the wall-hung boiler is kept at the lowest level, that is, about 8 degrees Celsius, and when you go home, it is best to set the indoor temperature between 18 and 22 degrees, and if there are elderly and children at home, it can be two degrees higher.

If the indoor temperature is required to reach 20 degrees, then the wall-hung boiler needs to be between 55 and 60 degrees, the specific situation needs to be adjusted according to the size of the room and the insulation effect, if 55 degrees is set, the indoor temperature has exceeded 20 degrees, then appropriately reduce the temperature of the wall-hung boiler, so that the indoor temperature is controlled at 20 degrees, if the indoor temperature has not reached 20 degrees, you need to increase the temperature until the indoor temperature has 20 degrees.

25 The environment is the most suitable for human life. At this temperature, the human body does not feel hot or cold, and the capillaries in the body are dilated and balanced, and it feels very comfortable. In summer, the optimal temperature for the human body is slightly higher than 25, which is 26-28.

When the temperature starts to rise until it exceeds 32, the body begins to have a fever and mood swings. At this time, you need to take some measures to regulate your body temperature.

1. Don't heat the room temperature too high when heating, according to statistics, heating the room to 19 consumes 10% more energy than heating to 18.

2. It is not advisable to turn off the gas wall-hung boiler when there is no one at home during the day, and the temperature can be adjusted to the lowest. After 9 hours of cooling in the room, due to the large temperature difference between the room temperature and the set temperature, the boiler needs to be operated on a large fire, which not only does not save energy, but will waste more gas. The scientific approach is to slightly lower the temperature of the room through the room thermostat, if there is no room thermostat, the heating temperature of the wall-hung boiler can be directly set to the lowest, during which the boiler will be intermittently burned to make up for the heat dissipation loss of the room.

This saves energy and allows you to enjoy the warmth when you get home.

3. When entering the night state, the room temperature can be appropriately adjusted to 2-3 lower than the daytime temperature, which also helps to save energy.

4. The temperature of the domestic water of the wall-hung boiler should not be set more than 60, and the water temperature of people's bathing in winter is generally about 42, and about 37 in summer. The anti-fouling characteristics of the wall-hung boiler also determine that when the set water temperature of the domestic water exceeds 60, the possibility of fouling will be greatly increased. The generation of scale will inevitably affect the heat exchange efficiency of the equipment.

In winter, the use of wall-hung stove heating, the indoor temperature is set to 18-20 is more reasonable, when sleeping at night, the room temperature can be appropriately adjusted to a temperature lower than the daytime temperature 2-3, which is not only energy-saving but also helps to improve the quality of sleep. Normally, the water temperature of the floor heating should be set to 40 50, and the radiator water temperature should be set to 50 60.

It depends on your house is a water coil to look around the radiator, the radiator can be adjusted to 70 degrees, and the water coil can be adjusted to 45 degrees, otherwise it will affect the life of the water pipe!

Wall-hung boiler heating 40 to 80 degrees is suitable.

Floor heating system: The water supply temperature of the floor heating system should be 45 degrees to 60 degrees Celsius according to the requirements of the heating specification, so we can set the water temperature at this range. When we debug, we can first adjust the water temperature to 45 degrees, let it run for 6-8 hours, and then raise the water temperature to 55 degrees, so that the ground and furniture have a hot rise process.

Radiator system: according to the requirements of the heating specification, the water supply temperature should be 65-80 degrees, we can set the water temperature at 65 degrees when we debug, we can first set the water temperature at 65 degrees, and we exhaust to adjust the water flow; After the exhaust is completed, the water temperature can be raised to 75 for operation.

Cons:

1. It costs money to consume energy, and the reason is very simple - boiling water at 40 degrees will definitely save money than boiling water at 60 degrees.

2. The water pipe bursts, because almost all the water pipes in our home are PPR pipes, and its life span is generally 8-15 years, which is directly related to the water temperature and use time. The higher the water temperature, the more dangerous it is, and if you encounter a poor water pipe, it will burst in a few years, and the loss is not small.

If it exceeds 60 degrees, the temperature of the radiator heating water should not exceed 70 degrees.

2. It is quite convenient for users equipped with wall-hung boiler thermostats to set the temperature, and the room temperature of how many degrees is needed can be accurately set directly through the thermostat;

3. Users who do not have a thermostat need to adjust the wall-hung boiler according to the actual situation of the room to control the water temperature of the floor heating or radiator and other heat dissipation terminals, under normal circumstances, the water temperature of the floor heating should be set to 40 50, and the water temperature of the radiator is set to 50 60.

Make heating more energy-efficient: First of all, in winter mode, the wall-hung boiler can provide domestic hot water and heating. After starting the winter mode, we also need to set the appropriate temperature :

1. If it is floor heating, the temperature of the heating water should not.

1. Pay attention to insulating the house:

At the end of the gas wall-hung boiler, whether it is floor heating or radiator, if the house is not well insulated, a large amount of indoor heat is lost to the outdoors through heat convection, and a large amount of outdoor cold air flows into the room, so that the wall-hung boiler is constantly running and heating, and the amount of gas is naturally very large. Remind the majority of users to close all doors and windows before going out, and close all the curtains to keep the house warm.

2. Install the wall-hung boiler thermostat

Some home heating users do not install a wall-hung boiler thermostat, and use a heating manifold for temperature control, although this can also control the indoor temperature, but there is no thermostat to save energy, so it is recommended that users install a wall-hung boiler thermostat, which not only makes heating more comfortable and convenient, but also safer and more energy-saving.

The use of a wall-hung boiler temperature controller can save 20 28 hours of gas, and it can also achieve personalized temperature regulation and achieve energy saving.

3. Don't start and stop the wall-hung boiler frequently

The gas consumption of the wall-hung boiler at the start is the largest, and the more times it starts, the more it consumes. It is recommended to minimize the number of starts when using it, and when there is no one at home, you can adjust the wall-hung boiler to a low temperature running state, and then adjust it to the desired temperature after returning home.

Under normal circumstances, the water temperature of the non-intelligent wall-hung boiler should be controlled between 42 degrees and 50 degrees, and the water temperature of the intelligent wall-hung boiler should be controlled between 38 and 50 degrees.

The temperature of the wall-hung boiler is generally about 50 degrees, because this temperature is very high.

1. If it is a floor heating, the temperature of the heating water should not exceed 60 degrees, and the temperature of the radiator heating water should not exceed 70 degrees.

2. It is quite convenient for users equipped with wall-hung boiler thermostats to set the temperature, and the room temperature of how many degrees is needed can be accurately set directly through the thermostat;

3. Users who do not have a thermostat need to adjust the wall-hung boiler according to the actual situation of the room to control the water temperature of the floor heating or radiator and other heat dissipation terminals, under normal circumstances, the water temperature of the floor heating should be set to 40 50, and the water temperature of the radiator is set to 50 60.

Hello, I have seen your question and am sorting out the answer, please wait a while

The heating of a wall-hung boiler from 18 degrees Celsius to 25 degrees Celsius can be set between 18 degrees Celsius and 25 degrees Celsius, because according to research, this is the most comfortable temperature for the human body. According to the relevant provisions in the "Design Code for Heating, Ventilation and Air Conditioning", the standard for indoor heating temperature is between 18 degrees Celsius plus or minus two degrees.

The general design temperature of the wall-hung boiler is 85 degrees. In actual use, radiators (radiators) are usually used to be above 60 degrees Celsius, and floor heating is usually used to be below 60 degrees Celsius.

There are two types of wall-hung boilers, and they can be burned at different temperatures.

1. The first type of products: wall-hung boilers with ordinary combustion technology.

The thermal efficiency of domestic products can usually be about 90% under full load and about 85% under small load. The exhaust gas temperature of such products is above 120, and the content of harmful nitrogen oxides (NOx) and carbon monoxide (CO) in the exhaust gas is about 150-200mg kWh, and the content of carbon monoxide (CO) is about 120-200mg kWh.

2. The second type of products: wall-hung boilers with high calorific value condensing technology.

According to the German EN483 standard, the test results were carried out under the conditions of 50 (outlet temperature) and 30 (return temperature). In addition, the exhaust gas temperature of the condensing wall-hung furnace can be reduced to about 40 at the minimum, and the latent heat of water vapor in the flue gas is basically fully absorbed and utilized, so the thermal efficiency can be greater than 100% and up to 109%.