The newly bought electric wok clicks as soon as it is used

Updated on healthy 2024-08-11
14 answers
  1. Anonymous users2024-02-15

    <> "The click of the electric wok may be due to the following reasons:1Mishandling:

    The new electric wok needs to be washed and dried to ensure that the inside is clean and the heating element is free of water, otherwise a clicking sound may occur. 2.Material Reason:

    Some electric wok pans have a spray coating on the inside of the pan body, which will cause a clicking sound due to different temperature changes. 3.Heating tube aging:

    In some cases, if the electric wok is used for too long, the heating tube will deteriorate, resulting in uneven heating or clicking. 4.Unstable power supply:

    If the power supply is unstable, it will affect the use of the electric wok, which may cause a clicking sound. It is recommended to solve the problem by the following measures:1

    Wash and dry the electric wok and use it again, making sure the inside is clean and the heating element is free of water. 2.Choose a better quality electric wok pan.

    3.If the heating tube is aging and needs to be replaced, it is recommended to replace the original spare parts. 4.

    To check if the power supply is stable, it is recommended to plug the electric wok into a stable outlet. If none of the above measures solve the problem, it is recommended to seek help from the after-sales service center.

  2. Anonymous users2024-02-14

    I know this! There shouldn't be any sound, I also have one, buy an electric pressure cooker and send it, it's good. You see if it can be used normally, if it can, there should be no problem, it may be thermal expansion and cold contraction.

    If there is a strong burnt smell and cannot be used normally, it will be overhauled. Hope it helps!

  3. Anonymous users2024-02-13

    This is the case with all electric pressure cookers, because the continuous pressure increase and decrease in the process of work makes the outer pot produce a certain elastic deformation, so there will be a clicking sound.

  4. Anonymous users2024-02-12

    When the pressure cooker is out of pressure, it will make a noise, so don't worry if it is not serious if it is always clicking.

  5. Anonymous users2024-02-11

    It's best to take a look at the after-sales service, it may be that there is water, or there are cockroaches in some places, cockroaches will cause a short circuit, what brand of pressure cooker to buy, just call ** to consult.

  6. Anonymous users2024-02-10

    In the case of an electric pressure cooker, if it keeps snapping, it is because of the electric pressure cooker, which may not have a good seal.

  7. Anonymous users2024-02-09

    If the pressure cooker keeps clicking, you should be careful when cooking, don't let the bottom of the pot get wet, and see if there is any rice sticking to the bottom of the pot.

  8. Anonymous users2024-02-08

    1.The reason for the banging sound of the rice cooker: The water at the bottom of the inner bowl of the rice cooker is not wiped dry, and the sound of the rice cooker when it encounters water after heating. There is also the sound of the relay working in the pot, through the temperature measurement of the pot bottom sensor, the single-chip microcomputer directs the relay to power on or off.

    2.Precautions for the use of rice cookers:

    3.When placing the rice cooker, it should be placed on a board with good insulation (such as porcelain or cement) and should not be used on wood products or flammable materials to avoid accidents.

    4.Before putting the inner pot into the shell every time, the surface of the inner pot, especially the water droplets at the bottom of the pot, must be wiped clean, so as to avoid the "crackling" sound caused by the light heat plate and the short circuit of the electrical parts caused by the dampness.

    5.The bottom, edge and electric heating plate of the inner pot should not collide, so as not to deform, reduce the thermal efficiency, and seriously deform, which will lead to burning out the heating plate.

    6.The contact surface between the bottom of the inner pot and the heating plate should be kept clean, and no foreign objects such as rice grains should be involved, otherwise the inner pot will tilt and reduce the thermal efficiency.

    7.When placing the inner pot, it should be put down lightly, and it should be placed right, and it should not be thrown violently, so as to avoid the deformation of the bottom of the inner pot or the damage of the electric plate.

  9. Anonymous users2024-02-07

    Summary. Hello, I'm glad to answer for you, the reasons for the buzzing of the newly bought rice cooker are as follows: 1. The side of the pot is ringing:

    There may be air leaks, most likely due to the sealing ring. 2. The float valve sounds: the hole may not be in the right position, cannot be jacked, and cannot be sealed.

    3. Pressure limiting valve ringing: deformation occurs after a long time, or it may be the aging of the sealing ring, resulting in air leakage. 4. Pressure switch beating sound:

    The pressure is not adjusted. 5. The bottom of the inner tank of the rice cooker sounds: the water at the bottom is not dried, and the sound of the rice cooker when it encounters water after heating.

    6. The whole pot sounds: the sound of the relay working in the pot, through the temperature measurement of the sensor at the bottom of the pot, the single-chip microcomputer directs the relay to power on or off. Extensions:

    There is a sound all the time when the rice cooker is cooking, it depends on what kind of noise it is, and the ** of the noise is analyzed. Some are the sound of a mechanical timer, some are the sound of water before or after boiling, and some are the sound of the internal temperature control element when it is in motion, etc., and so on.

    What's going on with the buzzing of the newly bought rice cooker.

    You are good at hail, I am happy to answer for you, the reasons for the buzzing of the newly bought rice cooker are as follows: 1. The side of the pot rings: Brother Jian may have air leakage, most likely because of the problem of the sealing ring.

    2. The float valve sounds: the hole may not be in the right position, cannot be jacked, and cannot be sealed. 3. The pressure limiting valve sounds

    It may be deformed after a long time, or it may be that the sealing ring is aging, resulting in air leakage. 4. The pressure switch beats: the pressure is not adjusted well.

    5. The bottom of the inner liner of the rice cooker rings and brightens the sail: the water at the bottom is not dried, and the sound of the rice cooker when it encounters water after heating. 6. The whole pot rings:

    The sound of the relay working in the pot, through the temperature measurement of the sensor at the bottom of the pot, the single-chip microcomputer directs the relay to power on or off. Extension: There is a sound all the time when the rice cooker is cooking, it depends on what kind of sound it is, and the ** of the sound is analyzed.

    Some are the sound of a mechanical timer, some are the sound of water before or after boiling, and some are the sound of the internal temperature control element when it is in motion, etc., and so on.

    You look at the ** of the ringing.

    Then let me know, and I'll do my best to help you out.

  10. Anonymous users2024-02-06

    Summary. 1. It is normal to make a sound, because the heating water with resistance performance will make a sound, and the electric heating pipe will emit a burning vibration wave and the sealing resonance sound of the water reservoir when it starts to heat after the power is turned on, and the sound will become smaller and smaller as the temperature rises, so there is no need to worry. 2. If you hear the squeaking sound of other electrical appliances or smell the smell of electrical plastics, then this sound belongs to the fault of the electrical part, and then immediately stop using and call the relevant maintenance personnel to come for maintenance.

    3. The buzzing sound you hear should be the sound of boiling water.

    I'm still a little confused, can you be more detailed?

    1. It is normal to make a sound, because the heating water belongs to the resistance performance of the boiling water will make a sound, and the electric heating pipe will emit a kind of burning vibration wave and the sealing resonance sound of the water reservoir when it starts to heat after the power is on. 2. If you hear the squeaking sound of the electrical appliance or smell the plastic smell of the electrical appliance in your nose, then this sound belongs to the fault of the electrical part, and then immediately stop using it and call the relevant maintenance personnel to come for maintenance. 3. The buzzing sound you hear should be the sound of boiling water.

  11. Anonymous users2024-02-05

    The reason why an electric pressure cooker clicks is usually caused by a gradual increase in pressure as the steam in the pot is generated. When the pressure in the pot reaches a certain value, the safety valve will automatically pop out, and a "whew" sound can be heard at this time, releasing a part of the steam to maintain a stable pressure to prevent the pressure in the pot from being too high. The sealing performance between the pot and the lid is also very critical in this stupid process, and if the seal is not good, it may also cause the pressure in the pot to be too high and make a clicking sound.

    In addition, when cooking in an electric pressure cooker, the moisture in the ingredients will gradually form steam as it heats up, and the steam emission will also cause the sound of Li Jin clicking. In this case, the cooking time and heat should be adjusted to reduce the rate at which the steam is released to reduce the clicking sound.

  12. Anonymous users2024-02-04

    The reason why the electric pressure cooker "clicks" is usually because the steam pressure in the pot is too high, and the main branch exceeds the safe pressure value set in the pot. When the pressure in the pot is too high, the air valve on the lid of the pot will automatically exhaust, causing a "click" sound. This condition indicates that the electric pressure cooker is working normally, and if the clicking sound is too frequent, it may be faulty.

    It is recommended that users check whether the sealing gasket of the pot body is intact, whether the lid is installed correctly, whether there is any residual food on the wall of the pot body, and whether there is too much moisture in the pot and other factors. If the above problems are not resolved, the "click" sound is still frequent, it is recommended to stop using it and seek professional repair help.

  13. Anonymous users2024-02-03

    An electric pressure cooker rattling is normal. Because when the water inside the electric pressure cooker condenses on the protector and forms small droplets, the water droplets cool, which will lead to gas-liquid exchange, so that the pressure intensity will decrease, so that the sound will be made. So, the click sound is part of the normal operation of the electric pressure cooker.

    In addition, when the safety valve is opened, allowing the excess pressure to be released, the lead will also make a clicking sound.

  14. Anonymous users2024-02-02

    After the inner tank is completely dried, put it in the rice cooker, and check that there is no water or foreign matter on the heating plate, and if there is water on the outer wall of the inner tank, there will be a sound for a while.

Related questions
30 answers2024-08-11

It is normal for the chassis of a newly bought electric wok to be steaming when it is used for the first time, because the evaporation phenomenon after the moisture adheres to the surface of the pan and is heated, so don't worry. As for what you said, there is also a burnt smell, generally there will be no one, because there is no glue wire inside the base of the electric wok, and its connection is generally made of copper sheet or copper wire with a layer of glass fiber tube, which will not produce odor after being energized. See if it's caused by the plug wire. >>>More

11 answers2024-08-11

Let's use the old way! First clean the new pot thoroughly with dish soap, then buy whole fat pork from the vegetable market and fry the lard in the pot, then pour out the lard and wash it with water, wipe it with a rag! The boiling procedure for the new pot is complete! >>>More

14 answers2024-08-11

The new pot also doesn't have much packaging, so simply throw it away. However, it should be noted that the packaging on the handle of the new pot is a layer of plastic film, which must be torn off, otherwise it will slip or be ignited by fire. >>>More

22 answers2024-08-11

<> if you buy an ordinary household pot, it is easier to deal with, first of all, heat the pot, then turn off the low heat, buy some pig skin, the pig skin should be oily, the pig skin does not need to be cut, it is best to be large, wear gloves, otherwise it will be hot, use the pig skin in the pot back and forth to wipe the wall of the pot, wipe it slowly over low heat. >>>More

6 answers2024-08-11

1. Prerequisites for pairing and connecting Huawei phones through the self-discovery function: 1The system version of Huawei phones is above and above. >>>More