Is it okay for Wuling Rongguang to add antifreeze directly without releasing water?

If you don't lack antifreeze, you don't need to add it directly, if it's missing, of course, you can add it directly, but it's best to add the same brand and model.

In this case, of course, it is not possible to exhaust the vehicle when adding antifreeze.

Hello, for this model, it must be released first, and then it can be added, otherwise it can't be added.

Hello, this is not possible, it is better to drain the old antifreeze completely and then add new antifreeze.

Hello, if the car used to be antifreeze, etc., just add the same model as the previous antifreeze, if there is water, you must put it clean and then add antifreeze.

Hello, this is no problem if you just add supplements, but if you replace it with a new one, it won't work.

Hello, Glory, if there is less antifreeze, you can add it directly, if you want to replace it after a long time, you have to put the original one first.

Hello, it's definitely not going to work in it. Even changing antifreeze requires exhaust. It's best to go to a repair shop or a 4S shop.

Hello As you said, if the original car is added with water, it can not be operated in this way, and it is possible to lose the effect of antifreeze after adding antifreeze, not antifreeze, anti-corrosion, anti-boiling.

Hello, it is recommended to replace all the antifreeze and put the water out of it, which is better for the engine.

This depends on how long it has been used, and the antifreeze added before can be added if it is not long, and the model color needs to be the same.

Hello, to tell you about this situation, my personal suggestion is to put the antifreeze inside the car, and then add new antifreeze.

Under normal circumstances, if there is less antifreeze, you can buy a small bottle of your own and add it directly.

If you only replenish antifreeze, then you need to add the original color antifreeze. If I replace it, I must put off the original.

Wuling Rongguang changed the antifreeze and returned liquid.

Air exhaust is required, and the specific operation steps are as follows:

1. Press the brake pedal of Wuling Rongguang.

2. Twist the car key of Wuling Rongguang and start the engine.

3. The instrument of Wuling Rongguang lights up, and the engine is run until the water temperature reaches 90 degrees.

4. Turn off the engine and let the water temperature drop to room temperature.

5. Pull the front machine bureau early to know the cover switch wrench.

6. Lift the engine cover upwards.

7. Unscrew the lid of the small kettle of the water tank and drain the gas in it.

8. Supplement the antifreeze tung elimination solution to the max limit.

Wuling Hongguang. Water-based antifreeze with ethylene glycol.

At present, more than 95% of domestic and foreign water-based antifreeze uses ethylene glycol, and compared with tap water, the most significant feature of ethylene glycol is antifreeze, while water cannot be antifreeze. Secondly, ethylene glycol has a high boiling point and is volatile.

It is small, has a moderate viscosity and little change with temperature, and has good thermal stability. Therefore, glycol bypass antifreeze is an ideal coolant.

Wuling Rongguangsheng cooling system can add 5 liters of antifreeze to the emptying, and the specific method of adding antifreeze is as follows:

1. Close the key door of the vehicle to OFF mode.

2. Pull the front sales leather of the vehicle's legroom to open the button.

3. Turn on the car and turn it forward.

4. Slowly unscrew the lid of the small kettle.

5. Add antifreeze to the small kettle, and the thin tube will empty the air.

6. When the water temperature reaches 90 degrees and no longer rises, the antifreeze is filled.

There are five major reasons for water ingress into the engine oil: 1. Engine water plugging and leakage, due to the corrosion of scale, the water is blocked and rusty, and the cooling water will enter the oil channel from the water channel until the oil pan. This cause is very common, so check for water blockages frequently.

2. The oil radiator is damaged, the radiator pipeline is damaged, and the water outside the radiator will penetrate into the oil radiator, resulting in water ingress into the oil. 3. Cracks in the cylinder liner, when the cooling water is in contact with the cylinder liner in the work, it is easy to produce cracks, once the crack occurs, the cooling water will directly enter the cylinder, and enter the oil pan through the cylinder wall, which will make the engine oil white, and the oil whitening will lead to poor engine combustion, white smoke and other problems. In general, the cylinder liner is not prone to cracks, but in some cases, such as the cooling water in winter without antifreeze, which causes freezing, this situation may cause the cylinder liner to crack.

4. Damaged cylinder liner seals, Damaged cylinder liner seals are a common cause of oil ingress, so when investigating the cause of failure, we must remember to check whether the cylinder liner seals are intact. 5. If the cylinder gasket is damaged, and the speed of water circulation is fast, the water in the waterway will flow into the oil channel, causing the oil to enter the water. Damaged head gasket is also one of the common causes of oil water ingress, try to use a new head gasket after each disassembly of the machine, so as to avoid oil leakage caused by cylinder head gasket leakage and engine damage.

Straight to the point, if the water enters the engine and mixes with the oil. has an impact on the engine. It will cause the oil to deteriorate and affect lubrication. Causes rapid engine wear or high water temperatures. Hurry up and get to the repair shop.

If the water enters the engine and mixes with the oil. has an impact on the engine. It will cause the oil to deteriorate and affect lubrication. Causes rapid engine wear or high water temperatures.

In the case of water, the water enters the engine and mixes with the oil. has an impact on the engine. It will cause the oil to deteriorate and affect lubrication. Causes rapid engine wear or high water temperatures. So it is recommended to add antifreeze.

This has to go to the repair shop to see, the actual situation, because if there is no antifreeze, it can not be opened, because the lack of antifreeze in the car will affect the heat dissipation effect of the animal fire water tank, so the water tank is not dissipated, then he will appear water, because the normal refrigeration of refrigeration can not achieve circulation, and the abnormal antifreeze will lead to too high temperature, which will seriously damage the engine.

No matter what brand of car it is, if you don't add antifreeze in winter, it freezes, and once the car is started, the car cylinder block can not circulate and dissipate heat, and the cylinder gasket is burned, and the water in the water tank will soak into the cylinder block.

The antifreeze flows into the cylinder barrel from the waterway along the trachoma of the cylinder block, and mixes with the engine oil, resulting in oil-water mixing. After this kind of failure, it is necessary to go to the 4S shop for maintenance immediately, otherwise it will cause the engine to be scrapped.

Wuling Light did not add antifreeze, frozen oil, there is water in the oil, it may be 1Engine water plugging leakage 2Oil radiator breakage 3Cracks in the cylinder liner 4Cylinder liner seal ring is broken 5Broken head gasket.

After Wuling Light empties the cooling system, it needs to be filled with antifreeze.

Liuzhou Wuling independently developed a mini car with high technology and high quality that meets international safety and environmental protection standards, and was launched in 2003.

Wuling Automobile brand was born in 1985, on November 18, 2002 officially established SAIC-GM-Wuling Automobile Co., Ltd., is a large-scale Sino-foreign joint venture automobile company jointly established by SAIC Motor Group Co., Ltd., General Motors (China) Co., Ltd., and Liuzhou Wuling Automobile Co., Ltd., its predecessor can be traced back to Liuzhou Power Machinery Factory, which was established in 1958.