Why is my phone connected to the wireless network, but I can t access the Internet?

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If individual applications are not available online:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

If you are using a Unicom broadband network, it is recommended to check the wireless network in the following ways:

Check whether the modem and the router match, for example, some routers cannot drive the modem's rate.

Check to see if other users around you are also experiencing slow connections.

What is the specific network speed of the customer service number of the broadband home, and whether it matches the actual usage rate.

Link the cat and the computer separately to test whether the network speed is normal, if it is normal, you need to check the router problem.

If you can't get on the Internet, it may be that there is a problem with the wifi network, or there may be a problem with the operator, and it has nothing to do with the mobile phone.

Why does the mobile phone show that it is connected to WiFi, but it can't connect to the Internet?

Ask a good question. Answer: Hello, first, first check whether there is a problem with the wireless network, connect to the wireless network with other mobile phone devices to see if you can access the Internet, if other mobile phones can access the Internet, it means that the network is fine; At this time, you can restart your phone and take a look!

Second, check whether there is a problem with the line, do not use the router, plug the network cable plugged into the router WAN port directly into the computer, use the computer for dial-up connection, see if the computer can access the Internet, if the computer can access the Internet, it means that there is no problem with the network!

3. If the network is normal, unplug the power of the router, restart the router, plug the router back in about five seconds, wait for the router to start normally, and check whether the mobile phone can access the Internet! I hope it helps.

It's a mobile hotspot, right?

01.Network diagnostics.

Step 2: In Change Network Settings, select and open Network and Sharing Center.

Step 3: In the Network and Sharing Center, find the mobile network hotspot you are connected to and click on it.

Step 4: Click "Diagnose" to diagnose the cause of network unavailability.

I've tried asking questions, big brother, I can't help it, I went in and saw that the network connection status is like this, and I wanted to ask how to reconnect to the network.

The computer is still connected to the mobile phone hotspot and cannot be used, so we need to check whether the computer was pulled into the blacklist of the mobile phone hotspot by mistake. Click on the hotspot to unlist the blacklisted device.

The question is not big brother, you misunderstood, I pulled the broadband and connected the phone with an oil leaker.

Is there a way to ask a question?

A4: Check the security settings of your router. Check whether some security policies that restrict MAC or IP address connections are enabled, or the corresponding rate limiting policy, if yes, turn it off, otherwise only devices with a specific MAC or IP address can be connected, and you should be able to surf the Internet normally after turning it off.

If it still doesn't work, you can also log in to the management interface, see if the router is set up with advanced security settings, and check whether the router is set up with the IP address and MAC address binding function, because once this function is turned on, even if the mobile phone is connected to the Internet, it will not be able to access the Internet, for this case, you can turn off this function, or add the MAC address of the mobile phone to the router's whitelist!

Mine too. It turned out that it could be on, but then suddenly it didn't. Later, I changed the domain name of the mobile phone, that is, I filled in the DNS address in the router.

You can check the following: manually set the IP address (to be on the same network segment as your wireless router), subnet mask, gateway (that is, the IP address of your wireless router), domain name (local DNS).

Needless to say, the signal can be connected wirelessly! No. If you can automatically connect but can't access the Internet, then simply change the phone to. That's how I am, the router doesn't turn on, and the wireless network doesn't connect.

If it's wireless in the office, it may be that the user is full, and mine is, you can change the office to another wireless.

1. I don't know what the signal strength is, and if the signal is not good, it is difficult to successfully connect to the Internet.

2, there are some mobile phones do not support the router wireless network SSID is Chinese, if so, change to English and alphabet first. The router's settings and bandwidth are also important.

3. Finally, the wireless network is not enabled by the firewall, this is also a problem, this is a permission problem, my wireless network is a firewall, even if there is no password, others can not connect! I'm using TP Link wireless routing.

If you want to use IP, you don't need to set it, just get it automatically! You should have one of the questions above depending on the situation!

There is also the management of bandwidth, in the wireless router, if the bandwidth is too small, this situation will also occur, find the network manager!

Note: If the router is set up with wireless and wired MAC address filtering, you should also add this MAC to the wired MAC address filtering so that you can go up! Pay attention to the instructions of the router!

What wireless network you are connected to, and some need to log in.

Generally, after setting up the wireless router, it will switch to an automatic dial-up connection.

You don't need to manually connect the router and dial up.

If the phone is not available for internet access in this situation.

Then you can only re-flash the machine.

Or try to change the connection method in the wireless router.

If it helped you, please choose it, thank you.

The main problem is that the WAN port of the route is set incorrectly.

1. The connected network cable should be plugged into the WAN port. wan mouth.

2. Then set the IP of the LAN port of the wireless router, this IP should not be in the same network segment as the IP of the cell route, you may wish to set it to restart at this time, and then use the IP you just set to access the wireless router.

3. Next, set the WAN port, this one selects the dynamic IP. Dynamic IP4, and then configure the DHCP service, and the address pool must be the same IP range as the LAN port.

Definitely can't get on, you have to connect the router directly to the Internet, let the computer connect to the router again (whether you are wired and wireless connection, wired connection LAN port), as long as the computer can be on, the mobile phone can definitely be on, as for how to set up the router for you, here is no explanation.

What cat do you use? Wireless cat or wired cat?

If it is a wireless cat, it must be cracked to realize the wireless routing function, so that mobile phones and laptops can access the Internet wirelessly.

If it is a wired modem + wireless router, the wireless router must be set up in accordance with the ADSL virtual dialing (PPPoE) mode and automatic dialing.