If we only build a house in the countryside and don t erect pillars, what will happen to the built h

Personally, I think that the security of such a house is probably not particularly high, and I suggest that it is better to erect pillars.

First of all, it depends on how high and what kind of house you build, and secondly, it depends on what area of the countryside you are in. For a one-story bungalow and a two-story building, even if there are no ring beams, it is okay to only do a good job of load-bearing walls. However, if you want to build a house with more than three floors, ring beams and pillars and load-bearing walls are indispensable, especially for the whole roof.

With sufficient funds, the two-storey building can also be used in its entirety. As the saying goes, money is priceless!

It is relatively unsafe to build a house without load-bearing things, and this kind of house cannot withstand the wind and rain, and the danger factor is particularly high.

The built house is not very strong and can collapse easily, especially when it rains heavily.

The usable area of the house will be larger, and a lot of European decoration styles can be done, but the structure of this house will decline.

The peasant brothers build a house, the more they build, the better, the more money, the cover is high, 5 floors need 6 floors, 6 floors need 8 and a half floors. As a result, it fell off. People eat the management division.

Eat lawsuits, don't do it, eat the national meal, all the supply system, don't be yourself for a minute. And there are people looking at you, you are like a generalissimo. Smaller than the Emperor. Spirit.

Everyone knows the role of the ring beams and pillars, but if you don't have much money and want to improve the living conditions, you can save a little bit, the house is erected, but there are cracks everywhere, but it can't be poured, it's ugly.

The house is of course as strong as possible, as long as there is money or the frame is safe!

Regardless of the first or second floor, ring beams and columns should be used.

The two-storey rural villa has just been completed, with 37 concrete bricks on the foundation plus ring beams, columns, and two-story ring beams.

The circle beam is done, not bad for that money!

The poles of self-built villas in rural areas are generally built at the corners of the wall, around the house, or on the body of a relatively long wallIt is used to connect walls, as well as grab foundation beams. If it is a brick-concrete structure, the main function of the pole is to resist the shear stress, the seismic grade of the building, and the transverse load. If it is a frame-shear structure, it is also resistant to shear stress, the seismic level of the building, and the vertical load is shouldered.

In the case of building a house in rural areas, the function of the pole is to better enhance the unity and stability of the building structure design, and connect with the raft foundation above the roadbed project and the ground ring beam of the newly opened real estate to create a skeleton structure, which can be good tensile and bending resistance, and resist the interaction force damage suffered by the house. For example, natural disasters, cracks in buildings. To put it simply, it is to make the house stronger, more load-bearing, and more durable.

In addition, the pole also effectively fixes the connection in the middle of the wall to avoid cracking the bearing capacity of the wall and cracking the building, because the pole will release the tie bar to the surrounding wall and throw the nearby wall. The vast majority of the rural self-built villas are brick-concrete building structures, and the biggest feature of brick-concrete structure building structures is that they are loaded by the wall, rather than using columns to carry weight, so this kind of column is called shear wall instead of load-bearing column, and all the building steel of shear wall is the main reinforcement of the structure rather than the main reinforcement of the structure.

The role of shear wall in the structure of brick-concrete structure building is to improve the overall structural strength of the wall, improve the professional ability of the wall to resist transverse shear stress, in short, it is to be more able to build the seismic level, and to reduce the harm or damage of the house in a certain seismic intensity. Yes, after all, the house is used to live in people, and no one can grasp the cyclical movement of the platesSometimes the shock of natural disasters can reach thousands of miles. Although it costs a little more to build a new house, the column structure of the house at least makes people feel at ease to live in.

There are no columns for the circle beam of the self-built house, as long as the floor is not high or it is not on the ** belt, it can not be used; The main function of the column is to make the house more solid, and it is not easy to collapse, and it plays a supporting role for the house.

I don't think it's okay to have circle beams in a self-built house without columns; The main function of the column is to increase the stability of the house, which can make the house have a longer life.

It is not possible to make circle beams in self-built houses without columns; The role of the column is mainly safety, if the foundation is not very strong, the use of columns can increase the safety factor of the house.

In the design of the main structure, it is necessary to consider the geological conditions, dynamic and static loads, and the scope of use. The structural force is a very complex and rigorous thing, which cannot be determined intuitively and uniformly. At the same time, there are reasons for not conforming to the specifications and building, so don't joke about safety.

The so-called ground beam is the professional term ground ring beam on our rural self-built houses, which is set below plus or minus zero as the basic function; There is also a kind of ring beam that is set under the floor slab, and the ring beam needs to be built on the structural column. It plays a role in stabilizing the main body and strengthening the earthquake resistance.

You're kidding, according to the information you provide, you not only have to have ground beams but also to form a closure, if there are no few columns are easy to be unstable, a rural hand car may be able to scrap a house, you can't save much and have to pay a huge risk, so it is not feasible in the structure, in addition to the other wall you said is not good on three sides of the column, different foundation forms have different settlements, and finally will cause cracking of the floor slab, so on the whole, your idea is very immature, A single layer is not good, let alone a second floor.

Don't take it for granted when building a house in the countryside, you still have to ask insiders more, otherwise you will regret it for life.

If you don't hit the ground ring beam, then the column should be deep enough, so the ground circle beam is not wasted, and it replaces part of the bricks.

This is set up for earthquake resistance, it's up to you, it's okay without ring beams. If you don't get it, you will regret it, and if you do, you are afraid of spending money. Actually, the cost has already been calculated.

Or you'll make a house made of wood.

If it's not high, it's no problem. But the pillars should be a little deeper. In the past, it was possible to build the house directly with bricks.

The four-story house was built in the countryside, and there was no remedy for the ground circle beams and columns.

Hello, it is recommended that for the situation that the four-story rural house that has been built does not have ground circle beams and columns, the following measures need to be taken as soon as possible to remedy:1Find a professional architect or structural engineer to conduct a site survey and evaluation to understand the structural and safety performance status of the house.

2.For the parts where the problem is found, it can be repaired by local reinforcement, and the bearing capacity of the foundation can be increased to improve the overall stability. 3.

If the problem is severe, it may need to be demolished and rebuilt or reinforced, to ensure the structural safety of the house. In short, in order to ensure the structural safety and service life of the house, it is recommended to follow the code and air wisdom standards during the construction process, and do not omit the necessary structural design and construction requirements.

Summary. Hello dear In the absence of ground ring beams and columns, if you want to strengthen the load-bearing capacity of the house, you can consider the following measures:1

Add reinforced concrete beams and columns: You can add reinforced concrete beams and columns under the original house structure to increase the load-bearing capacity of the house. 2.

Reinforcement of the wall: Reinforced concrete columns or wall panels can be made on the wall of the house to increase the load-bearing capacity of the house as a whole. 3.

Reinforced roof: Reinforced concrete beams or wall panels can be added to the roof to strengthen the load-bearing capacity of the house. However, it should be noted that the above measures need to be designed and constructed according to the actual situation, and it is best to find a professional construction team to operate to ensure that the reinforced house structure is safe and reliable.

Hope mine is helpful to you, dear

The four-story house was built in the countryside, and there was no remedy for the ground circle beams and columns.

Good. Hello dear In the absence of ground ring beams and columns, if you want to strengthen the load-bearing capacity of the house, you can consider the following measures:1

Add reinforced concrete beams and columns to clear the concrete ground and columns: You can add reinforced concrete beams and columns under the original house structure, which can increase the load-bearing capacity of the house. 2.

Reinforcement of the wall: Reinforced concrete columns or wall panels can be made on the wall of the house to increase the load-bearing capacity of the house as a whole. 3.

Reinforced roof: Reinforced concrete beams or wall panels can be added to the roof to strengthen the load-bearing capacity of the house. However, it should be noted that the above measures need to be designed and constructed according to the actual situation, and it is best to find a professional construction team to operate to ensure that the reinforced housing structure is safe and reliable.

Hope mine is helpful to you, dear

How to add it, can you tell me about the specific method?

Add below the original house. It is best to find a professional construction team.

The four-story house was built in the countryside, and there was no remedy for the ground circle beams and columns.

Kiss has already helped you find the results; If the fourth floor of the rural house is not laid with ground ring beams and columns, the following remedial measures are recommended: 1Reinforcement of the foundation:

Concrete or steel reinforcement is applied to the foundation to increase the load-bearing capacity of the foundation. 2.Increase the thickness of the wall:

Reinforcement and concrete are added to the inside of the wall to increase the load-bearing capacity of the wall. 3.Retrofitting beams and columns:

Reinforced concrete beams and stand-up trouser imitation columns were installed between the floors to increase the load-bearing capacity of the floors. 4.Installation of steel structure:

Install steel structures on the original structure of the ruined house to increase the load-bearing capacity of the whole house. It is advisable to seek the advice and advice of a professional architect or structural engineer to ensure the effectiveness and safety of the remedial measures. I hope my dear friend helps.

This question is a bit interesting, the same rural self-built houses, the basis does have a variety of practices. But no matter what kind of foundation and what kind of structure must be made of ground beams, starting from the foundation column to make the frame, it is obvious that this approach is not advisable.

The only self-built house I have ever seen in a rural area that does not have ground beams is still because there is no way to make ground beams. It was a two-story old house with additional floors, and because it could not be demolished and rebuilt, only four more floors were added on top of the previous two floors. After digging the pile again and making the foundation, because there was no way to make the ground beam, the direct foundation column was made to the top floor of the second floor and then made a ring beam, and then four layers were added to it.

Of course, this is all the result of actual measurements and designed by professionals.

Why do you build a house in the countryside, the beam is to be firm and also for the house to sink, the beam is also related to the geology, the geology is soft, then you must have to play the beam, the geology is soft and does not build the beam, the house will sink in three or five years, now the house is built with bricks, and cement, and the cement board are very heavy, I Tang Ge built a bungalow, also hit the beam, now it is more than ten years, there is a little crack on it, it should be sinking, if you don't hit the beam to sink faster.

Ground beams are not dispensable in rural self-built houses, but play a very large role, and the effect is also very obvious. For the whole building, the ground beam is equivalent to the stirrups on the reinforcement of our columns, when we tie the column iron, don't say that the stirrups are not needed, even if the stirrups are too little, it will affect the overall structure of the column, weakening the load-bearing capacity of the column.

And the ground beam is not only connected to the whole foundation to prevent the uneven settlement of the foundation, and the ground beam can also carry the weight of the wall on the first floor of the rural self-built house, first of all, it can ensure that the wall on the first floor will not crack because of sinking. In general, it is normal for rural self-built houses to be ground beams or not, because this does not mean that there are any regulations, and you can make your own decisions about your own house. However, it is not recommended to save even the floor beam, for the whole house, the floor beam does not need a lot of money, and there is no need to save money that affects the safety of the house.

The frame column is the support beam, and the beam then bears the load transmitted by the slab and the infill wall, and the structural column is actually a part of the brick wall, which is used to improve the seismic performance of the brick wall (the wall here includes both the load-bearing wall of the brick-concrete structure and the infill wall of the reinforced concrete structure, the structural column is the first to build the wall, and the steel bar and the horse tooth are reserved before pouring, and the frame column must be poured first.

Because the decoration method of many rural houses is different, and it is also in order to have stronger beams, there will be different decoration methods.

This is according to their respective needs, but also because of the different regions, generally the north will make the floor beams to make the house more stable, and the south will play pillars, so that the house is more light and ventilated.

Formally speaking, it must be to lay a floor beam, but some people do it relatively simply in order to save costs.