How to deal with wipers that are not clean, what to do if the wipers are not clean

The wipers of the new car and the new car are blowing rain, and I have not heard that the scraping is not clean, but after running for a while, the problem of the front windshield not being clean. Although it is not a big problem, it is still very annoying.

The same goes for my car, which often has problems with not being clean. After analyzing the cause, not only did the wiper blade not be replaced, but it was also as clean as when it was a new car.

Reasons for not being able to scrape: Mainly invisible dirt on the glass. First, the car is parked at the downwind of the ** air-conditioning cooling water tower, and the cooling water tower will sprinkle the particles after the water tearing on the glass to form small white spots, which are difficult to completely remove after drying; The second is that the car is parked under the tree, and the mucus secreted by the insect sticks to the car glass; The third is the mucus of insect carcasses that are crushed by high-speed running for long distances.

Since these things stick to the glass, it is difficult to remove them completely with water and a car cloth (just they can't be seen), forming uneven surfaces on the glass. In this way, when the wiper is used, the glass will not be cleaned.

Treatment measures: soak the glass with water, gently touch it back and forth on the glass with your hands, if the glass surface is not smooth, it means that there is a foreign body. When clearing, you can try to wipe it with warm water a few times, and then gently rub it with your hands, or you can use newspapers to remove these difficult to remove dirt little by little, the effect is good, and then touch the glass with your hands after the water is flushed, which is very smooth.

At this point, turn on the wipers and try to scrape very cleanly. Car owners with such sunny conditions can try it.

The above experience may not be suitable for other car front gears are not clean, if there is no uneven feeling when touching the glass with your hands after the glass is wet, you may have to change the wiper blade.

The wipers blow the rain, and I haven't heard that the scraping is not clean, but after running for a while, the problem of the front windshield not being clean. Although it is not a big problem, it is still very annoying.

The same goes for my car, which often has problems with not being clean. After analyzing the cause, not only did the wiper blade not be replaced, but it was also as clean as when it was a new car.

Reasons for not being able to scrape: Mainly invisible dirt on the glass. First, the car is parked at the downwind of the ** air-conditioning cooling water tower, and the cooling water tower will sprinkle the particles after the water tearing on the glass to form small white spots, which are difficult to completely remove after drying; The second is that the car is parked under the tree, and the mucus secreted by the insect sticks to the car glass; The third is the mucus of insect carcasses that are crushed by high-speed running for long distances.

Since these things stick to the glass, it is difficult to remove them completely with water and a car cloth (just they can't be seen), forming uneven surfaces on the glass. In this way, when the wiper is used, the glass will not be cleaned.

Treatment measures: soak the glass with water, gently touch it back and forth on the glass with your hands, if the glass surface is not smooth, it means that there is a foreign body. When clearing, you can try to wipe it with warm water a few times, and then gently rub it with your hands, or you can use newspapers to remove these difficult to remove dirt little by little, the effect is good, and then touch the glass with your hands after the water is flushed, which is very smooth.

At this point, turn on the wipers and try to scrape very cleanly. Car owners with such sunny conditions can try it.

The above experience may not be suitable for other car front gears are not clean, if there is no uneven feeling when touching the glass with your hands after the glass is wet, you may have to change the wiper blade.

There are two reasons for this situation, one is that there is an oil film on the front windshield, and the second wiper blade is aging, first clean the front windshield with dish soap, and if it is still not clean after cleaning, it is recommended to replace the wiper blade.

Wipers, also known as wipers, water picks, wipers or windshield wipers, are equipment used to brush and scrape rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety. Because of the legal requirements, cars in almost all places carry windshield wipers.

Wipers are an important accessory installed on the windscreen, and its function is to sweep away rain, snow and dust that obstruct the view on the windshield glass. Therefore, it plays an important role in driving safety.

How to deal with the wiper scraping is not clean:1. Remove the two wipers;

2. Buy a piece of water sandpaper, tear it into small pieces, and use a small piece each time;

3. Use a suitable container to hold water, put the wiper and water sandpaper into the water and soak it through;

4. Polishing the rubber strip of the wiper with water sandpaper, pay attention not only to polish the two sides, but also to properly polish the front of the rubber strip, the time does not need to be very long, about 5 minutes.

Wipers, also known as wipers, water picks or windshield wipers, are devices used to scrape rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety.

If you find that the wiper is not clean, most of it is due to improper maintenance, the reason why the rubber strip of the wiper is rough, in fact, the rubber strip is not aging and hard, as long as you find a way to make the rough rubber strip polished and clean.

1.The glass is not clean: the glass is not cleaned properly when washing the car, and the surface of the glass is adhered to fine asphalt particles, etc., which will reduce the surface finish of the glass, and the rough glass surface will not only be unclean, but also hurt the wiper strip.

2.Wiper strip rough: If the original wiper strip is properly maintained, its lifespan can reach 5 years.

It should be noted that the fine sand particles on the wiper rubber strip should be removed in time. Scraping water with these fine grains of sand is equivalent to grinding the wiper strip with a grinding wheel.

It won't take long for the finish to deteriorate, and the frizzy strip will definitely not be able to clean the rain.

1.Lift the wiper blade and separate it from the windshield, check whether the wiper is damaged, replace it in time if it is damaged, if there is no damage, soak the wiper blade with water and then polish it back and forth with sandpaper several times, and finally rinse it with water.

2.If there is dust or stains on the windshield, try not to use the wipers to clean them. The function of the wiper itself is to clean up the rainwater, and the unknown stains on the glass may cause the aging and wear of the blade edge of the wiper strip, which will reduce the service life of the wiper.

3.When the wiper is not in use, place it in the lowest position, and pay more attention to cleaning the lower part of the wiper to prevent foreign objects from deforming the wiper blade due to long-term compression.

4.Generally, after half a year or a year of use, the wiper blades will have some wear problems, and if they are not used properly, it is easy to cause wiper failure. Therefore, when the wiper has problems such as deformation and dry cracking, it is urgent to replace the wiper.

1. Oil film appears on the glass.

If there is a film of oil on your glass, this film comes from the exhaust emissions of the car driving on the road, even if you scratch the wipers, it will not work. The wipers don't work, either it's a problem with the wipers or the problem is with the windshield.

Splash some water on the windshield, whether there is an oil film or not, you can tell at a glance. If you want to clean the windshield of the oil film, you can remove it well with kitchen degreasing products such as Mr. Vermeer and oil hoists.

2. Check whether the wipers are hardened.

The wiper blades are exposed to the sun for a long time, and the rubber strips will inevitably age. When the scrape is not clean, it may be that the rubber strip is aging, or it may be that there is dirt on the wiper, just check it and remove the dirt.

3. The angle of the wiper rod.

If the wiper is intact and fine, but it can't be cleaned, it may be the reason for the angle of the wiper, and the wiper can be adjusted, and the spring is too tight to relax the distance between the springs.

The wiper is not clean, and the above methods are still useless after trying, so you can only replace the wiper with a new one. Usually, you should also pay attention to the maintenance of the wiper, and don't wait until you need to use it to find that it is no longer working.

You clean the wiper pieces first, and see if the wiper is clean, if it still doesn't work, you have to replace it.

Hello, check whether the wiper blades are aged and check whether the glass has an oil layer.

The wiper is not clean: clean the wipers.

Prepare a piece of water sandpaper, remove the wipers, soak the wipers in a bucket, polish the adhesive strips of the wiper brush with water sandpaper, and install them in place after drying. However, if this method still cannot be solved, it is generally necessary to replace the new adhesive strip to solve the problem.

Reasons why wiper wipers are not clean

1. The angle of the wiper. If the arc of the wiper is too large or too small, it will affect the cleaning effect, if there is a problem caused by this kind of scraping, you can remove the wiper and readjust it.

2. The reason for the spring pressure of the wiper arm. When solving, you need to disassemble the wiper to adjust it, and the wiper arm spring pressure or buy a new spring can solve it.

3. There are too many sundries in the rubber strip. There are many reasons why the wiper is not clean, all of which are related to too much debris in the strip, if the strip is not damaged, you can clean it up directly, but if the strip has aging and other problems, you should also directly replace the new strip.

Hello! Glad for your question.

1. Wiper blade aging: two wiper blades are rubber products, which will be aged and hardened after a period of time, and it is more significant in winter. Most wiper blades are recommended to be replaced every one to two years.

2. There is a foreign object in the middle of the wiper blade: when the wiper is opened, there will be a sharp sound of friction between the wiper blade and the front windshield.

3. The installation angle of the two wiper arms is wrong: it will affect the wiper blades to jump on the windshield, then it will cause a sound. If the two wiper blades are normal, you need to adjust the angle of the wiper arm so that the two wiper blades are perpendicular to the windshield plane.

1.Remove the wipers and wash them several times;

2.Take out the fine abrasive cloth, fold it in half, and cover both sides of the wiper rubber sheet;

3.Moisten the wiper with clean water, then rub the wiper up and down; Don't use too much force when kneading, repeat three or four times.

4.After rubbing, wash away the fine sand with clean water.

5.Finally, simply install the wipers.

Usually do a good job in the maintenance of the car wiper to avoid potential safety hazards caused by the failure to work normally when used in rainy days.

Attachment: Methods for checking the wiper of the vehicle:

1.The way to check your wiper is simple. Spray some cleaning liquid, then start the wipers, pay attention to whether its movement is smooth, and listen for any loud noise. If there is, it means that the pressure of the wiper on the glass is too large and must be adjusted appropriately.

2.After sweeping the wipers once or twice, look to see if there is any residual moisture on the windshield and observe if there are any scratches. If it's obvious, the wiper blade on the wiper is aging and should be replaced with a new one.

3.If all kinds of faults are complete, be sure to check the wiper blades. The method is to pull the wiper up and touch the cleaned rubber wiper blade spike with your finger to check whether there is any damage and the elasticity of the rubber wiper blade. If the blade is aged, hardened, or cracked, it should be replaced in time.

Wiper wiper brush will have abnormal sound, wiper blade is a rubber product, so that Xian Juhe will use a period of time will be aging, hardening, winter is more obvious, if it has been not clean, the simplest and most effective solution is to directly replace the new wiper blade.

When the wiper blade is turned on, there will be a sharp sound of friction between the wiper blade and the front windshield, and the owner can check and clean up the foreign objects under the wiper blade or wiper to ensure that the wiper blade is clean. After a long time, the wiper connecting rod mechanism will age, the elasticity of the wiper arm will decrease, and the bushing will wear out or even fall off. Please check the wiper arm or wiper link bushing.

Resolution

In summer, there is more rain and dust, if the daily car washing and maintenance, do not pay attention to the cleaning of the glass, then there will be some dirt and attachments on the front windshield of the car, so that the finish of the glass will decrease. As long as the glass is scrubbed clean, it can be solved, remember to scrub the side glass of the car as well, so that the view will be better.

If the wiper strip is old or hairy and has dirt, then there will be scraped streaks on the glass. In this case, just clean the wiper strip with a rag or dirt with a rag, and then gently beat it with fine sandpaper. At the same time, it is important to clean some stubborn stains on the outer surface of the glass when washing the car.

What to do if the wiper is not clean? How to deal with the wiper scraping is not clean: 1. Remove the two wipers; 2. Buy a piece of water sandpaper, tear it into small pieces, and use a small piece of closed Kai each time; 3. Use a suitable container to hold water, and soak the wiper cherry ridge and water sandpaper into the water; 4. Polishing the rubber strip of the wiper with water sandpaper, pay attention not only to polish the two sides, but also to properly polish the front of the rubber strip, the time does not need to be very long, about 5 minutes.

Wiper car call, also known as wipers, water dials or windshield wipers, is a device used to scrape rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety. @2019