The wiper effect is very poor, how to fix it, what to do if the wiper scrapes blurry on a rainy day

Hello car owner, this situation is generally caused by the quality of the wiper blade is too inferior, it is recommended that you replace the wiper blade at the first point, recommend the Bosch wiper blade, the quality of the Bosch wiper blade is better!

In this case, you can consider replacing a better wiper blade with a pure brand, a Bosch brand. Or replace the wiper assembly.

Hello, the wiper effect is very poor, one is to consider the aging of the rubber strip of the wiper, resulting in the appearance of strips after scraping the glass, and the other is that the wiper is not adjusted well, the angle is wrong, and the overall scraping is not clean and there will be abnormal noise.

Hello, if the effect of this wiper is very poor, it is recommended that you better replace the wiper blade.

If the wiper effect is very poor, it is basically caused by the aging of the wiper strip, and it can be replaced with a new one.

Hello, generally the wiper strip is aging. You can replace it with a wiper strip. Generally fine.

Hello. Generally speaking, this situation is a problem of aging of the adhesive strip, and it is recommended that you replace a pair directly.

If this is the case for you, it is recommended to focus on checking whether the wiper blade is aging, and it is best to replace the wiper blade.

Hello In this case, as you said, it is recommended to check whether the wiper blades are aged, then check whether the wiper arm is weak, and then check whether there is oil stain on the glass.

There is also the possibility that the wiper is not clean because of the bad angle

This situation is generally caused by the quality of the wiper blade is too low, it is recommended that you replace the wiper blade at the first point, recommend the Bosch wiper blade, the quality of the Bosch wiper blade is better!

Generally, family car wipers are equipped with standard, fast and slow three gears, which can be adjusted, generally on the right side of the steering wheel. There may be some differences between models.

The manual wiper adjustment method is as follows:

Light rainfall: Don't rush to use wipers when it starts to rain lightly. Spray glass water to moisten the glass before opening it for the first time to avoid dry scraping of the glass window due to lack of moisture.

Heavy rainfall: If the rain is heavy, adjust the working frequency of the wiper in time to ensure a clear vision. If the rain is too heavy and the rain is too urgent, and you still can't see clearly when you drive to the highest gear, it is recommended to find a safe place to stop temporarily and wait for the rain to lighten, and remember to turn on the fog lights and double flashes when parking on the side of the road to avoid accidents.

Use rear window wipers: If your car has a rear wiper, don't forget to turn it on when it rains.

Generally, SUVs, hatchbacks, MPVs and other models are mostly equipped with rear wipers, this is because the rear windshield of the sedan has air flow through, while the hatchback or SUV does not, which leads to the fact that once there is rain, the sedan can use the air flow to blow down the water droplets, but the hatchback cannot, the water can not be blown off in time, it will be easy to stick to the dust, affect the sight of the rearview mirror, and lead to unsafe driving.

The wiper is blurry on a rainy day, this may be because the wiper is aging and needs to be replaced, because the wiper arm is made of rubber and is easy to age, so a new one can be solved!

If the wiper is blurry, it's best to replace it again. Apply a little dish soap or something to it, so that you can wipe it cleaner and cleaner.

At the same time, it is possible that the performance of this wiper will deteriorate after a long time, and you can replace it with another one, and try it again, which can further improve its efficiency.

Every time it is the rainy season, the unclean glass of the car will directly affect the driver's eyesight and cause unsafe accidents. If your wipers are not clear at the same time, it will further affect the safety of the driver. Today I'm going to tell you what to do if the wiper is not clear, it will be blurry after scraping.

Wipers: The oil film on the glass is the front windshield, if not the wipers. Perhaps the biggest problem is that there is an oil film on the glass.

If the owner's car has this oil film, it is inevitable to scrape it. At this time, remember to clean the front windshield well. Wipers:

Check if the wipers are hardened. Due to the long period of exposure of the wipers to the outside and the wind and sun, they often age. Assuming that in working condition, if it is not clean, it depends on whether the wiper is hardened and aged.

Wipers: Wiper rod angle problemAssuming that the wiper is suspected to be unclean due to the angle, the owner only needs to debug it. If it doesn't work, i.e. the downward pressure on the wiper is too high, just relax the distance between the springs.

The existence of wipers is still very important for our cars, because it is directly related to the safety of the driver. I hope that the wipers shared with you today can not be clear about what you should do, and it will be blurry after scraping, which can help you. If you want to know more, please ****, let's learn more.

The wiper noise is too loud to solve:

1. Wipers are consumables, whether they are bone-based wiper blades or boneless wiper blades, they generally need to be replaced in 3-12 months, which is more quality and use, and should be replaced in time.

2. There is also a small trick to eliminate the vibration and noise of the wiper blade, and use pliers to adjust the gap between the joints and the rubber sheet.

3. Remember not to dry scrape, so that the fine sand on the glass will accelerate the damage to the wiper blades, shorten the replacement cycle, and affect the use at critical moments!

4. Wipers are not only used when it rains, especially in North China, where there is often haze and fine sand, and the frequency of use will be higher, which will accelerate the replacement cycle.

Extended stock section rounding:

In the process of daily car washing and maintenance, the owner does not clean the glass well, resulting in some dirt and dirt and attachments on the front windshield of the car, so as to guide the glass finish to decline, at this time, the owner uses no matter how good the wiper is, the glass cleaning is not clean will not only affect the owner's driving sight, but also may cause damage to the wiper.

After wiping, the wiper will blur because the wiper does not completely clean the water. When this happens, you should replace the wipers with a new one, which can solve this problem perfectly. Wipers are rubber products, and rubber products will age after a long period of use.

After aging, the rubber of the wiper cannot fit the windshield completely, which will cause the wiper to fail to clean the water.

If the water is not clean, the windshield will blur after wiping.

Wipers don't have a fixed lifespan, but when the wipers are not clean and there is abnormal noise during the wipers, the wipers should be replaced.

When replacing the wipers, it is recommended to choose the best of the big brands, because the products of the big brands have a long service life and guaranteed quality.

And before choosing a wiper, you should determine the type and size of the interface.

Otherwise, improper installation will affect the normal operation of the wipers.

When using the car, be sure not to open the wiper leak when there is no water on the windshield.

When parking, it is recommended not to park in the sun, which will accelerate the aging rate of the wiper rubber.

When parking at night in winter, it is recommended to erect wipers to prevent the rubber of the wipers from freezing with the windshield.