How to distinguish the front and back of the fabric according to the edge of the fabric?

Generally, the pattern on the front of the fabric is clearer and more beautiful than the reverse side.

Fabrics with a striped appearance and color-matched molded fabrics must have a clear and pleasing front pattern.

Convex and concave fabrics are tight and delicate on the front with stripes or patterned embosses, while the reverse side is coarser and has long floating lines.

Raised fabric: Single-sided raised fabric with the plush side of the fabric front. Double-sided plush fabrics are fronted with a smooth and neat pile.

Observe the edge of the fabric: if the edge of the fabric is smooth and clean, the neat side is the front of the fabric.

Double-layer, multi-layer and multi-layer fabrics, if the warp and weft densities on the front and back are different, the front side generally has a larger density or the front material is better.

Leno fabric: the one with a clear pattern and the protruding side of the warp is the front of the fabric.

Terry fabric: Cover the side with a high terry density.

Grey fabric: the front texture is clearly visible, and the reverse texture is blurred.

1. Self-definition - consumers like that side, just use that side. Generally, the cloth surface is clean, the texture is clear, the gloss is soft and the side is positive, and the pattern of the fabric is selected to be the clear side of the pattern and texture, 2, the manufacturer's definition - according to the product design and finishing effect to decide, the convex and concave and convex fabrics, the front is tight and delicate, and the grooves are clear; The reverse side is rougher, and the floating pile is longer and longer. Brushed and brushed fabrics, generally the front brushed and brushed, if the double-sided brushed fabric, the smooth and neat side of the fluff is positive.

Double-layer multi-layer fabric, generally the density of the front side is greater than the front, and the front side of the raw materials with better performance. Coated fabrics, generally with a color coating as positive. Leno fabric, with clear lines, the protruding side of the warp is the front.

Terry fabric, the terry dense side is the front.

3. According to the use - the coating surface for downproof, windproof and other purposes is the reverse side.

1.According to the fabric edge identification: the front edge of the general fabric is smoother and crisper than the reverse side, and the edge of the reverse edge is curled inward.

The fabric woven by the shuttleless loom has a relatively flat edge on the front side, and it is easy to find the wool tufts of the weft head on the reverse edge. Some high-end fabrics. Such as woolen velvet.

Letters or other words are woven on the edge of the fabric. The font code or text on the front is clearer, more obvious and smoother; The font code or text on the reverse side is blurry, and the font is written backwards.

The front of the fabric rises with dense plush. The reverse side is a frizz-free tissue. The ground structure is obvious, such as plush, velvet, velveteen, corduroy, etc.

Some fabrics are so fluffy that even the texture of the ground is difficult to see.

2) Rotten flower fabric: the front outline of the pattern is clear, layered, and the color is distinct, if it is a suede rotten flower, the suede is plump and flat, such as rotten silk, georgette velvet, etc.

3.According to the trademark and seal identification: when the whole fabric is inspected before leaving the factory, the product trademark paper or manual is generally pasted, and the side of the paste is the reverse side of the fabric; The reverse side of the fabric is stamped with the date of manufacture and the inspection seal at both ends of each horse.

Unlike domestic products, the trademark header and seal of export products are stamped on the front.

Summary. Hello, glad to answer for you.

Yes, the pinhole is protruding on the front side, and the pinhole recess is on the reverse side.

To identify the front and back of the fabric, there is a saying that it is to look at the pinhole, is this statement correct?

Hello, glad to answer for you. Yes, the pinhole is protruding on the front side, and the pinhole recess is on the reverse side.

How do you think about double-sided cloth.

1. The pattern and color of the front of the general fabric are clearer and more beautiful than the reverse side. 2. The front pattern of fabrics and color-matching fabrics with striped appearance must be clear and pleasing to the eye. 3. Convex strips and concave and convex fabrics, the front is tight and delicate, with strips or pattern embosses; The reverse side is rougher and has a long floating line.

4. Raised fabric: single-sided fluffy fabric, and the plush side is the front. For double-sided fluffy fabrics, the front of the fabric is the smooth and neat side of the fabric.

5. Observe the edge of the fabric, the smooth and neat side of the cloth edge is the front of the fabric. 6. Double-layer multi-layer fabrics, if the warp and weft densities on the front and back are different, the front side is generally willing to have a larger density or the front of the raw materials is better. 7. Leno fabric:

The grain is clear, and the protruding side of the warp is the front. 8. Towel fabric: the side with high terry density is the front.

9. Printed fabric: the pattern is clear, and the brighter color is the front. 10. Whole piece of fabric:

Except for export products, those pasted with instructions and factory inspection seals are generally reversed. Most fabrics have obvious differences between the front and back, but there are also many fabrics that are very similar to the front and back, and can be applied on both sides, so this kind of fabric can not be forced to distinguish between the front and back.

I don't know exactly what type of double-sided cloth you are talking about. You can take a look at this list of identification methods.

That's right. However, it does not apply to all fabrics.

It is generally believed that the pinhole is convex and the pinhole is recessed.

Textile fabrics are often made of polyester yarn or special-shaped polyester yarn, nylon yarn, cotton yarn, wool yarn, etc. as raw materials, there are many ways to identify the front and back of textile fabrics, which can generally be identified by hand touch, eye and other methods, and the following describes several methods to identify the front and back of textile fabrics:

1. Identification according to the organizational structure of textile fabrics.

The front of the plain weave fabric is relatively smooth and clean, the color and pattern are clear, and the color is uniform and distinct. The reverse side is dull, the cloth edge is rough, and the texture is not clear.

2. Identification according to the appearance effect of textile fabrics after special finishing.

Single-sided fluffy fabric, with the plush side on the front. Double-sided fluffy fabrics (such as flannel) with a smooth, tight and neat fuzz as the front of the fabric. The warp and weft densities of the front and back of double-layer and multi-layer fabrics are different, and the front side generally has a larger density or the front material is better.

3. Identification according to the trademark and seal of the textile fabric.

The whole fabric, except for export products, is generally pasted with the product manual (trademark) when inspecting the package, and the side of the paste is the reverse side of the fabric. The reverse side of each piece of fabric is stamped with the date of manufacture and the inspection seal at both ends of each piece of fabric. For export products, the trademark head and stamp cover are affixed on the front.

There are several ways to distinguish between the front and back of a fabric:

1. General fabrics:

The color of the pattern on the front is clearer and more beautiful than that on the reverse side;

2. Printed fabrics:

The flower pattern is clear, and the brighter color side is the front;

3. Convex strips and concave and convex fabrics:

The front side is tight and delicate, with stripes or pattern embosses, while the reverse side is rougher, with long floating lines;

4. Raised fabrics:

5. Towel fabric:

The side with a high density of terry is the front;

6. Double-layer multi-layer fabric:

If the warp and weft densities on the front and back are different, the front side will generally have a larger density or the raw material on the front side is better;

7. Leno fabric:

The grain is clear, and the protruding side of the warp is the front.

8. Whole piece of fabric:

In addition to export products, where there is a manual (trademark) and stamped with a factory inspection seal, the general is the opposite, 9, the front and back are very similar fabrics:

Both sides can be used as fronts.

There are the following ways to distinguish the front and back of the fabric: 1. General fabrics: the pattern and color of the front are clearer and more beautiful than the reverse side; 2. Printed fabrics:

The flower pattern is clear, and the brighter color side is the front; 3. Convex strips and concave and convex fabrics: the front is tight and delicate, with strips or pattern embosses and the reverse side is rough.

German E+L has this kind of equipment, which is not too high, 10 tens of thousands of yuan.

Fanshi Electronic Technology also has this kind of equipment, which is much lower than the imported one.

If production needs to monitor the front and back sides in real time, it is best to use machine identification, which is more efficient and less costly.

Twill cloth skimming is the face is the lining.

There are needles on the edge of the cloth, how to distinguish between the front and the back.

Different fabrics have different opinions! Under normal circumstances, it is occasionally ...... to feel drippingHee-hee......