Let s talk about it, how do you distinguish between good and bad skateboards?

Board surface, mainly by hand weighing, I don't know why, maybe playing the board for too long, generally the board surface to start with I know whether it is a good board surface, birch and maple just look at the words can not be seen, but the hand touches it, birch is more bulky, maple or add fiber to the weight of the board in general, bamboo board surface is the lightest. In addition, the coloring of the Kanban surface, rough must be defective. ‍‍

Looking at the wood grain, you can roughly distinguish the material, the best part of Canadian maple, the general part of Canadian maple, and the other woods; Weight, the same number of layers, assuming the glue is the same, then Canadian maple is generally the lightest; Listen to the sound, **crisp, not stuffy; The board from a good factory is more rounded at the junction between the surface and the edge, and there will be no abrupt or rough feeling. ‍‍

It's not that complicated. Look directly at the price point. Generally, the retail price of domestic board surface is 220-300.

The retail price of imported panels is more than 380. Domestic brackets range from 100 to 300, and imported brackets are more than 280. Domestic wheels are 100-260, imported wheels are more than 280.

It's mainly these big pieces. The above ** are the retail prices stipulated by ** merchants, and they will be discounted by 8-9 when they are generally sold. If a complete set of skateboards looks lower than 280, then it's basically not a good thing. ‍‍

Look at the bracket, look at the weight, I personally don't like the hollow bracket, it's not that it's bad, but I like the feeling of thickness, the primary color bracket is the most fake, it may also be factory goods, this depends on the workmanship, and the other is to look at the brand, too famous brand imitations, the low-end is slightly better, and look at the wheelbase and PU pad, this is only known if you use it. ‍‍

Bridges play a non-negligible role in the performance of skateboards. At present, most bridges made in the United States are made of special aluminum alloys, and there are almost no fractures. The bridge distance and height of the skateboard bridge are also different, and different skateboard bridges should be matched with different widths of the board surface and wheels, so that the skateboard will be more comfortable and easier to handle. ‍‍

There's an old saying that you get what you pay for. What is expensive is definitely good. Now the skateboarding industry is very transparent.

The more expensive the better. But the premise is that there is no branding. A board of 300 yuan is sold for 3000 with a trendy label.

It's a tight skateboard brand, and if you want to buy a good one, you can buy an expensive one. ‍‍

The main thing is the quality of the material and bracket of the kanban, a good material and the bracket can have better cushioning, reduce the damage of the skateboard, and a simple and rough way is to look at the price, the higher the brand of skateboard, the better.

The quality of the skateboard depends on the slippery feeling when it is used, as well as the length of time it is used, and the longer it is used, the stronger the skateboard will be.

Skateboards are generally distinguished by their technical indicators.

Performance indicators: When selecting materials for wheels, it should be considered that they are suitable for different site pavement, such as floor pavement, cement pavement, asphalt pavement, etc. No matter what road surface you are sliding on, the wheels must have good elasticity, wear resistance, and moderate hardness, and ensure that the wheels have enough friction coefficient for the road surface. (The hardness coefficient of the wheel generally has three units, a, b, and d, and it is impossible to accurately convert it because some materials and indicators are different.)

Cushions and sleeves mainly play the role of cushioning and shock absorption. One is to play a role in shock absorption when the road surface is uneven; the second is to protect parts when there is a large amount of movement; The third is to maintain the balance of the body.

The board surface is generally made of Canadian maple multi-layer board compression, and the compression process is divided into cold pressing and hot pressing, and cold pressing is to compress the wood chips directly without adding glue, which is more advanced and has better performance. The board surface has high impact toughness and good elasticity, which ensures that the pedal is not damaged when jumping on the skateboard at a certain height.

The bracket bracket, which we call "bridge" for short, is the skateboard accessory that bears the most torque, the most squeezing, and the most friction in the entire skateboard. Bridges are generally cast in alloys, and the craftsmanship and design vary from brand to brand. Bridges are available in high, medium and low levels, and the length of the central axis of the bridge also matches the width of the deck.

1. First of all, the material of the board, the best maple is Canadian maple, which has a greater density than other maples, good toughness, good elasticity, large and beautiful textures. The double rocker is made with a light and crisp sound. The general market price of the board is around 200.

This is followed by Russian maple, Northeast maple, and Chinese maple. Some longboards or small fish boards are made of bamboo, like long boards and small fish boards, if they are made of bamboo, their toughness is stronger than that of maple, and they are durable. The disadvantage is that the elasticity is not as good as that of maple.

2.Bridges, bridges are divided into die-cast bridges and gravity cast bridges. The general bracket is a die-cast bridge, and the gravity casting bridge** is much more expensive than the die-casting bridge, but its strength is several times that of the die-casting bridge. The material is generally aluminum alloy.

3. Wheels, wheels are generally distinguished from hardness and resilience. The higher the hardness, the greater the resilience and the higher its **. The diameter of the small wheel is generally between 50 and 58mm, and the width is between 30 and 36mm.

The hardness is between 90A and 60D, and the resilience is between 55% and 85%. Choose the hardness, resilience and size of the wheels according to the site. (I won't go into detail here).

4. Bearings, generally between ABEC1 and 9, the larger the value, the higher the precision. I generally don't look at the bearing grade, because now the bearing grade on the market is its own standard, mainly to look at the real thing, when rotating, the sound is big or small, the smaller the sound, the longer the rotation time, the better its precision, the better the bearing. The worse it is.

Some brands are also not classified according to this hierarchy.

Skateboards are basically the same, you can't see it, it's useless to touch, because buying a skateboard is assembled like buying a computer, if you want to buy it, look at the brand, imported ones are generally very good, and the domestic ones are also boiling point, skateboard bridges must be bought a good point, it is best to be imported, such as "ventrue (more than two hundred) thunder (more than three hundred)" other board surface or something accessories are up to you, if you can buy imported then of course better, you go to the skateboard shop to ask.

Generally, skateboards are made of seven layers (and a few nine-layers) of compressed maple. Wheels, PU pads, bridges, bearings, sandpaper and other components. There are also street style and U pools for skateboarding!

The easiest way to identify is to turn the board over and stand on it, and step on it hard, if the board and the ground are easy to contact, it is average, and vice versa! Hope it helps.

There are more than 300 general entry professional boards Be careful with toys It is recommended to go to a professional store to choose Don't buy toys for cheap.

It is generally recommended to choose a professional board for bond skateboarding.

The composition of professional skateboard is divided into board surface, bracket (also called bridge), bearing, wheel, sandpaper, and snail. A single board surface can reach 400+, the bracket can reach 300+, imported bearings and imported wheels are generally 200-300, sandpaper is relatively cheap, dozens of dollars, regardless of domestic or imported.

Therefore, if you want to match a set of top-of-the-line skateboards, you will probably need more than 1000**. Because the skateboard is relatively professional, wheels, bearings, brackets, sandpaper, bridges, these parts, there are special manufacturers, so some high-level skaters will choose to buy accessories separately and assemble them themselves. However, if you don't know how to do it, you may encounter pitfalls, and you may not be able to buy it if you are expensive.

But for novices, it is enough to buy a set of domestic assembly sets between 300-400, and domestic brands such as cooghi are suitable for competition and beginners.