Apple 6 can t connect to Bluetooth speaker, do you understand?

iphone6 can't find bluetooth solution:

2. If this is the first time to connect a Bluetooth device with a mobile phone, you can turn off Bluetooth first and then turn it on.

3. If everything goes well, you should find the Bluetooth device around you at this time.

4. Then tap the Bluetooth device to connect.

Turn back on pairing mode for Bluetooth devices:

If the above method still doesn't work, we can try to turn off the Bluetooth device first. Then turn on the pairing mode of the Bluetooth device according to its specific operation and see if it can be successfully connected.

Delete the originally connected Bluetooth device:

At some point, you will also encounter such a situation, which used to connect to a normal Bluetooth device, but now suddenly the connection is unsuccessful. At this point, we can click on the "Info" icon on the right side of the Bluetooth device.

Then click on the "Ignore Device" option.

Then click "Ignore Device" to delete the information that was previously connected to the device from the system, and then we can pair and connect with the Bluetooth device again to see if it can be successful.

For these methods above, each method can be tried a few more times to ensure that it can connect properly.

Update your phone's system firmware:

In the firmware version, you will experience a malfunction of an unhealthy Bluetooth connection. At present, the latest firmware on Apple iphone6 is the version, if the above methods cannot solve your problem, please upgrade and update the phone system.

The Bluetooth speaker and the Apple 6 mobile phone can be operated according to the following steps:1,Turn on the Bluetooth function on the mobile phone,Go in to search for the status of the Bluetooth headset。 2. To make the wireless Bluetooth speaker in the power-on state, you need to press and hold the answer button of the wireless Bluetooth speaker.

3. Until the indicator light: blue light and red light flashes alternately and then releases. 4. At this time, the Bluetooth speaker and the mobile phone will enter the match.

After the mobile phone displays this Bluetooth speaker model device, click OK to connect and use.

1. First of all, to turn on the Bluetooth function of your phone (pair with Bluetooth speakers), tap Settings in the main menu.

2. Set Bluetooth (confirm that it is turned on, it is green).

3. Then, turn on the power switch of the Bluetooth speaker, and press and hold the Bluetooth function button (until the Bluetooth device makes a beeping sound, indicating that the Bluetooth pairing with the mobile phone is successful).

4. At this time, the name of the device is in the Bluetooth of the mobile phone.

5. Click on this Bluetooth device, and there will be a prompt that it is connected. As long as the indicator light of the Bluetooth speaker is flashing, it means that it has not been successfully connected, and only when the indicator light is always on, it means that the two pairs of Bluetooth devices are successfully docked!

6. At the same time, the sound icon of the mobile phone will also flash and make a sound, indicating that the Bluetooth device has been successfully connected. Once another device is paired again, the originally paired device is invalid (only one device can be paired).

2, if the jbl bluetooth speaker has been linked to other mobile phones before, you need to reset, press and hold the power button of the jbl bluetooth speaker no, to release, until you hear the jbl bluetooth speaker beep sound can release the power button, at this time use your iphone to search for bluetooth, find jbl audio, click the link.

It's not that you can't connect, it's that your Bluetooth speaker didn't press the search mode.

In general, the search mode, red and blue lights, one jump and one jump.

After powering off, re-drive the Bluetooth speaker.

Bluetooth connection method BAI (optional model, based on the actual product):

1. Turn on the machine or press the mode button to switch to DAO Bluetooth mode, and the LED indicator flashes back. Some Bluetooth answers are flashing two lights.

3. Manually click, the device will be automatically paired and connected, the connection password is 0000 or 12344, the device that has been paired successfully will be automatically connected the next time it is turned on. Note: Within 10 seconds of entering Bluetooth mode, Bluetooth will automatically find the device and pair it to connect, and after 10 seconds it will be connected manually.

The reason why the Bluetooth speaker can't connect to the phone.

1、The Bluetooth speaker has not entered the matching state,Some Bluetooth speakers are turned on after the Bluetooth module responds very slowly and fails to start in time。

2. The password entered is incorrect, and the password must be successfully matched to connect successfully.

3. The distance is too far, the signal transmission ability of some Bluetooth speakers is not as strong as you think, and the distance is too far away to receive the signal.

4. Hardware facilities failure, whether there is a problem with the Bluetooth module of the audio or a problem with the Bluetooth function of the mobile phone, it cannot be successfully connected.

Bluetooth speakers can't connect to mobile phone solutions.

2. To make the Bluetooth speaker in the power-on state, you need to press and hold the on/off button of the Bluetooth headset for about 5-6 seconds. Until the indicator light: blue and red flashes alternately and then releases.

3. At this time, the Bluetooth speaker and the mobile phone will enter the matching state again. After the Bluetooth speaker is displayed on the phone, tap OK to connect.

4. Note that the effective distance between the mobile phone and the Bluetooth speaker is within 10 meters. Some Bluetooth speakers need to enter the password when matching, generally: 0000 or 8888.

There should be no matchmaking relationship, the method is:

Step 1: Turn on the Bluetooth speaker. Bluetooth speaker only needs to turn on the power switch, hear the prompt tone, and then the Bluetooth indicator flashes, indicating that the Bluetooth has been turned on and has entered the searchable mode.

Step 2: Bluetooth search. Turn on the Bluetooth function of the phone, set it to "visible to everyone" or be searched or open to detect in the Bluetooth settings of the phone, and then click "Search" to find the Bluetooth device.

Reasons why iPhone 6S Plus is not connected to Bluetooth speakers successfully: The Bluetooth device is not turned on; Phone system compatibility issues.

Method: Go to Settings - Bluetooth - Turn on Bluetooth; Or restart your phone.

Here's how:

1. Under the main menu interface, click Settings;

2. Click to enter Bluetooth;

3. Click the gray button behind the option to turn on the Bluetooth facility.

4. If you still can't turn on Bluetooth, then turn off the phone first, and then restart the phone.

Apple Bluetooth can only be used to transmit data between Apples, and can only be connected with Bluetooth headsets or Bluetooth speakers to answer**or listen**, and cannot be connected with other electronic devices.

iPhones have strict rights restrictions, especially when it comes to copyright issues. Apple's restriction is mainly to prevent the transmission of digital files between mobile phones, resulting in infringement. But Bluetooth headphones are not subject to this restriction.

Apple's Bluetooth is perfectly compatible with Apple's series products. Use the airdrop function when using it.