The computer can start, but it can t enter the system, whether it has nothing to do with the hardwar

Updated on number 2024-08-05
17 answers
  1. Anonymous users2024-02-15

    You say "can't enter the system" and can't judge that the specific fault is in**.

    If it stops on the boot screen (or motherboard information) of the motherboard, it is usually a hard disk problem.

    If the screen passes through the motherboard, but then the blue screen. It's mostly a memory problem.

    If it stops on the operating system splash screen, it may be an operating system or driver issue.

    In this case, you can reboot and press F8 to try "Safe Mode", if Safe Mode can't get in either, it may be a serious operating system problem).

    If "Welcome" appears, or if the desktop appears but there is no icon. Most likely the problem is caused by the virus.

    Most of the problems I've seen like not being able to enter the system are caused by viruses, but many antivirus software runs on the Windows interface, and it can't be killed if you can't enter the system.

    The solution to this is to first repair your operating system (reinstall it). After that, you should install an antivirus software with a "pre-boot antivirus" function (such as kv2008), and if this problem occurs again, it can be solved by killing the virus before starting.

  2. Anonymous users2024-02-14

    Check first to see if the memory and graphics card are loose, and if there is any problem with the hard disk data cable. If not, reinstall the system. It's a hardware problem!

  3. Anonymous users2024-02-13

    Most likely, there is a problem with the system. It is recommended to reinstall the system.

  4. Anonymous users2024-02-12

    Try connecting the hard drive to another computer, or change the power supply. Most of the time it is due to the power supply. There is a problem with other hard drives.

  5. Anonymous users2024-02-11

    If you have the conditions to replace it with good hardware, you can basically find out the problem.

  6. Anonymous users2024-02-10

    Computer practitioners, to tell you accurately, are the problem of the hard disk, and the hard disk has bad sectors.

  7. Anonymous users2024-02-09

    Any hardware failure on your computer will cause it to fail to boot.

    Specific judgment failure analysis:

    The power-on screen is displayed, but it does not enter the system. It may be that the system program is damaged, or the hard disk has a bad sector or other fault, the power-on switch screen has no display, the black screen, and the CPU fan can rotate, which may be a fault of the graphics card, memory, motherboard, etc.

    Press the power button when the power is on, the power light is not on, and the computer has no response, so you should consider and detect whether the power supply is normal; and the motherboard is faulty.

    Specific problems are troubled step by step, and you can.

    Replace a component to accurately determine the fault.

    You can solve computer problems!

  8. Anonymous users2024-02-08

    If the keyboard light is not on, it means that the motherboard is not powered on, and it is better to go to the computer company to test the motherboard.

  9. Anonymous users2024-02-07

    If the computer can't even be powered on, it can only be sent for repair. Motherboard, power supply, graphics card, memory Mainly these 4 are the most likely to have problems.

  10. Anonymous users2024-02-06

    There are many reasons why the computer can't start, small horses and carts, hardware problems, software problems, system problems, etc., it can't be said that it must be that hardware problem, it depends on what specific prompts are given!

  11. Anonymous users2024-02-05

    If you can't start it for a long time, can you start it in the end?,It may be a hard disk problem.,If you can't start it, you may be able to start the system.。 Others are also possible.

  12. Anonymous users2024-02-04

    It's not a hardware problem, it's a system problem, it said that a registration file in the system is missing, resulting in a boot failure, just reinstall the system!

  13. Anonymous users2024-02-03

    If it's a blue screen, the hard disk track is broken.

  14. Anonymous users2024-02-02

    Did you see if the power was plugged in first? Is there electricity?

  15. Anonymous users2024-02-01

    1 Check whether the antivirus software has killed the virus, you can determine whether it is caused by the computer system poisoning or malware, if there is a virus, it is recommended to use the computer manager to kill the virus, or if it doesn't work, reinstall or restore the system, you can solve it.

    2 **Computer Manager hardware testing tool to test the temperature of each hardware of the computer, open the case, see if the CPU fan and graphics card fan rotate normally, find out the problem, and change the CPU fan.

    3 If you add a discrete graphics card to the trapped computer, and the power supply is not enough, you can only change to a higher power power supply, and the power supply is unstable for a long time, so you must change the power supply to test.

    4 Shut down, touch the motherboard south bridge hall, north bridge chip, graphics card chip, if it is very hot, Wang Zhiyan is likely to be broken, to be repaired.

  16. Anonymous users2024-01-31

    It's already to this interface.,It's generally a system problem.,Let's start from scratch.。

  17. Anonymous users2024-01-30

    System problems, reinstall the system, look.

Related questions
17 answers2024-08-05

Have you ever overclocked?

Overclocking, if it is overclocked too much, karma is this symptom. >>>More

6 answers2024-08-05

The computer we use daily, sometimes it can not enter the system normally when it is turned on, and there is a situation that the computer cannot enter the system after it is turned on. >>>More

7 answers2024-08-05

Press the del button when you boot up, see if you can enter the BIOS, and if you can enter, see if the hard disk is still there. >>>More

23 answers2024-08-05

Press the DEL key to enter the BIOS to see if the hard disk is not detected, and whether the parameters of the hard disk are set correctly, if you don't know how to set it, choose to restore factory settings to save, or the hard disk may not be powered on, check the hard disk connection, meaning:"If the hard disk fails to boot, please insert the system disk or press the enter key"If the problem is not solved, then set it in the BIOS settings to boot from the optical drive, reinstall the system, and the fault persists, that is, there is a problem with your hard drive. >>>More

19 answers2024-08-05

It shouldn't be a compatibility issue.

Personally, I think it should be magnetized, so if you have a printer next to you, use the buttons of the monitor to degauss. >>>More