ITUNES DETECTS AN IPHONE IN RECOVERY MODE AND MUST RESTORE IT WITH A BACKUP FIRST. But I don t have

Updated on technology 2024-08-06
12 answers
  1. Anonymous users2024-02-15

    How did you get to where you are? If you click to upgrade iOS, then it must not be recovered, at least I know that is the case at the moment.

    If you operate something else, you may be able to recover.

  2. Anonymous users2024-02-14

    Sync Assistant - iPhone version. Do not use it as if it were jailbreaked. Then you can back it up. I've used it. It has to work!

  3. Anonymous users2024-02-13

    This is also the case with my mobile phone now, I don't know if the landlord's problem has been solved.

  4. Anonymous users2024-02-12

    It is recommended that you find a professional, the iPhone is not generally difficult to handle.

  5. Anonymous users2024-02-11

    iPhone6 restored on iTunes keeps showing that it is preparing to restore from backup, what should I do?

    iPhone6 restored on iTunes keeps showing that it is preparing to restore from backup, what should I do? Hello dear, <>

    Connect your iPhone to computer to iTunes and turn on it, confirm that the device is in recovery mode. (If the recovery screen does not appear, click "Your iPhone" and then tap "Summary" on the upper right) Click "Recover" and wait for the error dialog box to appear. When prompted, click OK.

    While your iPhone is connected to your computer, quit and restart iTunes. (It's not about restarting your computer [don't unplug your iPhone] This is especially important.) I mostly spend time.

    Now the system should re-recognize the iPhone in recovery mode. Try the recovery again to start a normal recovery operation. It's going to take a little longer.

    Hope my answer is helpful to you, <>

  6. Anonymous users2024-02-10

    I only encountered this situation a second ago... In this way, close iTunes first, reopen it, he will prompt you to recover, and then wait, the first time I prompted 1602 error,, no matter, close iTunes, in the open, he also prompted to restore, and then the same point to recover, and so on he prompted 1604 error again, no matter what, close iTunes in open, this time it was successful, the third time. I've seen it on the forums, and a lot of them have recovered like this...

  7. Anonymous users2024-02-09

    Haha, finally someone with me,..Now this one of mine is like this, and I'm looking for ,!!Various methods failed to flash the firmware.

  8. Anonymous users2024-02-08

    First, directly restore it to your previous firmware to see if it can be.

  9. Anonymous users2024-02-07

    Have you tried a force restart?

  10. Anonymous users2024-02-06

    It is recommended to enter DFU mode to restore the system.

    The operation is as follows: Step 2: Connect the iphone4s with a data cable to the computer.

    Step 3: Press and hold the power button on the top of your iPhone4S, and then slide to power off when the shutdown interface appears.

    Step 4: Then please press and hold the power button to turn on, then the Apple logo will appear on the screen, do not release the power button.

    Step 5: Then press and hold the home button on the home screen until the screen goes black.

    Step 6: When the screen is black, please release the power button and the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode

    Step 7: Press and hold the "Shift" key on your keyboard, click "Recover", and select the corresponding firmware to restore the system.

  11. Anonymous users2024-02-05

    When your iPhone is in recovery mode, you can't back it up, but you can use the backup to restore your iPhone in recovery mode.

    To back up the data in your phone, you must first exit the recovery mode, and the way to exit the recovery mode is to press the power on/off button + home button at the same time for more than 10 seconds.

    After exiting the recovery mode, connect to the computer and you can back up your data.

    The steps are as follows: connect the mobile phone to the computer through a data cable;

    Launch iTunes;

    Tap the phone icon;

    point summary; Click Back Up Now to back up the data from your phone to your computer.

  12. Anonymous users2024-02-04

    You can't back up your iPhone in recovery mode, you need to press and hold the power button to exit the recovery mode first.

    Backups can be divided into system backups and data backups.

    1. System backup: refers to the loss of system files caused by disk damage or damage, computer virus or human error deletion of the user's operating system, resulting in the computer operating system not booting normally, so the system backup is used to store the operating system in advance for backup support after failure.

    2. Data backup: refers to the user's storage of data, including files, databases, applications, etc., for data recovery.

Related questions
17 answers2024-08-06

The merchant should change it, it's purely a cartridge problem! No matter where it is, it makes sense, and if it is substituted, it can be replaced, if it is imitated, a ** store will be closed in the past, and it will definitely be replaced!

22 answers2024-08-06

What kind of food is you here, because you generally do not need to do SC certification to enter the supermarket, and only need to test and implement the standards. >>>More

4 answers2024-08-06

The conventional way is not good, because you can't communicate if you don't know the IP, and it's too troublesome to test them one by one, because there are too many IP addresses. Provide you with several methods, 1. Capture packets: Find a hub also called a hub (you can't use a switch), connect your computer to the hub, and then install a packet capture software on the computer (there is a famous packet capture software called sniffer, you can go to the network by yourself**), start to capture packets, and then connect the network cable of access control to the hub (be sure to open the packet capture software first, and then connect the access control), stop capturing packets after 10 seconds, and get the IP address of access control from the captured packets. >>>More

9 answers2024-08-06

There are two obvious errors in the answer Impossible, unless you are approximately equal, which is indeed more suitable for the answer Phenotypic plants so p(aa)=aa (aa+aa)=aa (1-aa)=(2 0 02 0 98) ( )= Disclaimer I also have that multiple-choice question at hand, and the answer should be wrong.

7 answers2024-08-06

Since the birth of the first plastic product, celluloid, the plastics industry has a history of 120 years. Its development history can be divided into three stages. >>>More