The host is installed with a router and can get on the network, when I don t want to open but can t

Even the modem has to be connected there on the broadband connection, and you have to enter your password!

Please elaborate. If the route is not automatically connected, you can set it.

Please check them one by one according to the following methods, or set it again to see if it works.

**The wire is connected to the modem, the modem is connected to the router WAN interface, and the computer is connected to the router LAN interface. Then make the following settings:

1. Set the IP attribute in the local connection of the desktop to be obtained automatically.

2. Open a web browser and enter the IP of the router in the address bar (or press enter.

3. Enter the username and password of the router in the login box (on the router) and log in to enter the settings page.

4. Select the setting item, set up the network connection first according to the connection wizard, select PPPoe when selecting the Internet access mode, and enter the broadband user name and password as required.

5. Save the settings.

6. Then select the setting item, and follow the connection wizard to set the wireless network security, which needs to set the user name and password of the wireless network for the wireless network card to use for Internet access.

7. Save the settings to exit and restart the router.

8. In this way, the cable network of the desktop machine can be used. Set the IP attribute of the wireless network card of the notebook to automatically obtain,And refresh the wireless network (at the beginning, you have to brush it several times),Click on the settings after finding it,Enter the password (the password set above),Save it and you can get it。

Remember, don't dial in with a broadband connection anymore and go straight to the Internet.

Reboot your router and then reconfigure it if it doesn't work! Since you said that the router is easy to use, then you should have used this router before, reset the information in it, and replace it with the current information.

Is the network cable plugged in? Is the network card driver of the computer normal?

Are you sure it's a desktop host? Are you sure it's a wireless router?

If it is, it's normal if you can't get on, and the host doesn't have a wireless network card.

It's best to tell me what you're configuring.

Do laptops use wireless Internet access? Is the wireless network card bad?

Is the laptop disconnected or IP conflicting?

The question is a bit logical, are you saying that the wireless network can be connected to the computer but not to the computer?

Is it wireless? Or is it wired? If there is a wire, check whether the network card driver is installed.

If the host is changed, it will be the settings in the computer! If you don't know how to set it! It's okay for people who call for broadband to get it!

Prepare two network cables (the first one you have ready, which is the one that goes through the "modem").

The second is to buy a network cable sent by the router, if you don't send it, you have to make a network cable with crystal heads at both ends. ）

1.Change the local connection to automatically obtain the IP address.

2.The network cable from the "modem" (modem) is connected to the "wan" port on the router, and the router's ports 1, 2, 3, and 4 are connected to the network cable port behind the computer host.

3.Open the browser and enter the password and username of the router are admin

4.Go to the router settings screen, select the PPPoE (ADSL virtual dialing) method, enter your home account and password, and confirm.

5.Then set the SSID, encryption method, and password. Save, restart. In the end, the setup is considered successful.

In this case, it is recommended that you first enter the routing settings interface to see what the status of your router's WAN port is! Thinking about how to fix it!

Enter the settings interface of the router, in the system tools, find the system log, there will be a log of the network in the general log.

The cat is connected to the host and plugged into the wireless WAN port Then plug in the host with the network cable that sent you One end is plugged in to the LAN port 1 Then start the computer directly connected to the unlimited route to set up Enter the broadband password in it Automatic connection In the open wireless network settings You are connected to the wrong way The route is used as a switch So this dial-up can access the Internet Desktop can not be on If there is a problem, ask me directly ** to give you an answer.

Put your original cat to the host line, connect the wireless router W at the beginning of the interface (that is, the cat to the wireless router w port), the given network cable into the wireless router L beginning of the interface, the other end, even your desktop, notebook with wireless function (note: remember to log in to your wireless router settings related things, there is generally a setup wizard inside).

Router dial-up settings: The following setup steps may help you: If it is not a new router, please press and hold the reset button in the power-on state for about 15 seconds until the router light flashes until the light flashes to go out and then turns on and then releases, and the router is restored to its factory state.

1. Remember the LP address, username and password on the label under the router chassis to log in to the router management interface;

2. Connect the computer to the LAN port of the router (the socket marked with numbers) with a network cable, and set the local LP of the computer to be obtained automatically;

3. Open the router management interface with a browser on the computer;

4. Set the Internet mode to PPPoE according to the setup wizard, and fill in the Internet account, password and other information as required, and set up LP and DNS to automatically obtain (dynamic);

5. At this time, you will connect the network cable from the outside, or the network cable from the cat to the WAN port of the router, click connect on the management interface, if the connection is successful, the network can go to the Internet normally, otherwise you should check where the setting is wrong.

6. Find the default SSLD in the wireless settings, use your mobile phone to search for wifi and connect, if you can't access the Internet, it means that there is a problem with the wireless part of your router, if you can access the Internet, then you can get the SSLD and security settings.

Good luck.

Cat - router WAN port (5), router LAN port (1 4) - computer.

Check that your line connections and settings are correct.

It is recommended to restore the factory settings and then reset it according to the manual.

The Internet access account and password of the telecom should be set to the route, have you done it?