I changed the wireless password, how can I not get in, it has always been this

The router has been reset and the admin password is admin

According to your instructions, you can infer that you did not make the modification or did not restart the router after the modification.

1. After the password is changed, the router needs to be restarted to take effect.

2. If the router has not been restarted. You can click the restart button. Posture Front.

3. The restart button is in: Settings Management - Restart the router, and it will take effect after restarting.

4. The main reason for the successful modification of the United States and Europe is that the save button was not clicked after changing the password. The result is that the modification is not successful. Please re-enter the reset settings.

5. Steps to modify the router secret sail width: First of all, you need a device. The recommendation is a computer. After connecting the router, open the browser, and connect the router to the network (wifi) connected to the router, or you can connect it directly with a network cable.

6. After that, some routers are separate passwords. Most of them are usernames, admins, passwords, and admins. Once you are in the router settings.

Change the router password in the router settings bar. After clicking Save, the route will be automatically restarted. If there is no reboot.

Please manually click the restart button.

First of all, it needs to be explained that if you only change the wifi password, there will be no problem of connecting to the Internet. If you can't connect to the Internet after changing the wifi password, most likely you have accidentally made a mistake with other configuration information in the router. At this time, Zheng Ju, it is recommended to restore your wireless router to factory settings first, and then reset the router to surf the Internet, reset the wifi name, and reset the wifi password.

After changing the wifi password, the device needs to forget the wifi and re-enter the wifi password to connect normally.

Forgot wifi on the computer:

1.Turn on the system wifi

2.Click Network Settings to enter the Network Settings interface.

3.Click Manage WiFi settings to enter the WiFi management settings interface.

4.Find the wifi name of the original router and select Forget.

Forgot wifi on the phone:

1.Turn on the system wifi and select the round button to the right of the wifi name you need to forget.

Click Ignore this network.

After changing the wireless password, if it appears, it can be connected, but it cannot be connected to the Internet. Shut down and restart the computer to resume surfing the Internet.

Restart the router after confirming that the password is correct. Or unplug the router and plug it back in after a few minutes.

If the router cannot log in to the management plane if the router enters admin, there may be two reasons for this: The password of the router is not the original password. 2. Problems with the browser.

Solution: 1. Reset the router, and after the reset, log in again with the original password admin. Router reset method: Press and hold the router reset button for 5 for 10 seconds, let go after the SYS light of the router goes out, and the reset is successful when the SYS light flashes again.

2. Change to a new browser and log in again.

Answer: Dear, hello, I am Yunduo, an electronic consultant, and I am happy to answer for you Please later, verify the function of changing the wifi password, we first need to go to the router to change the wifi password. Use any Internet device that can be connected to the wireless router to access the router settings screen. Enter "router IP address" in the browser to enter the router settings interface.

Generally, the IP address and username and password for logging in to the router settings interface can be found on the sticker on the back of the router.

Click the "Wireless Connection" icon to enter the "Wireless Settings" menu, switch to "Security Settings", and you can set the wifi password. Here I will change it to "12345678".

After the modification is completed, you can save the application, and this router does not need to be restarted after setting. Once the setup is complete, all Wi-Fi devices that have been connected to the router will no longer be able to use it for Wi-Fi.

Hello, this kind of problem, it is recommended that you explain what connection method your two router use? Wired bridging? Or wireless bridging? Or use the second router as a switch?

Also, please explain what system your computer is? Do you have an account and password for dial-up Internet access with a broadband connection?

You follow the steps below to set up the wifi again

1.Turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then plug in any LAN port with the network cable connected to the computer, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare a more wild modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used directly by plugging in the network like a computer, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

5.If you choose PPPoe dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open a broadband laughing booth, and it will be OK to fill it in!!

6.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

I hope mine is helpful to you, and if in doubt, please keep "following up"!

Hello: Hello, it is recommended that you do a factory reset and set up your router by following these steps:

1. Connect the home network cable to the WAN port of the router.

2. Use another network cable to connect to your computer at one end, and connect to your routing LAN port at the other end, (LAN port is the interface marked on the route!) ）

3. Turn on the computer, open the browser, and enter the route login IP in the address bar

4. Enter the routing login account and password in the pop-up dialog box, friendly reminder, if you don't know the routing login IP, login account and password, you can turn the route over and take a look, and write it on the back of the route! (Generally username: admin, password:.)

admin）

5. After entering the routing setting interface, the quick setting interface will generally pop up, you can select the broadband dialing method in this interface, PPPOE, and enter the Internet account and password!

6. Find the wireless settings, set your wireless SSID, wireless password, and wireless channel.

7. After the settings are completed, save the exit and restart the route! Once the routing restart is complete, your routing hardware connection and setup are complete! In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

For details, please see this post.

If so, no network access.

We recommend that you try a few of the methods in this post.

If it still doesn't work, please keep asking.

Hope your problem is solved soon! Thank you

3. Click on the display character, and you will find that the current password is still before the change, of course, it can't be connected to the network.

4. Decisively change to the modified password, and click OK.

5. Click OK and wait for a while for the network to reconnect.

You want to know the forgotten password on your phone and enter a new one.