How to set the wireless network password can prevent others from rubbing the network

Hello, you can fix this rubbing problem by setting up Mac filtering. Here's how:

1. The first thing is to log in to the router. Then enter [ in the browser, and the general router is logged in with this IP. Of course, there are not, you can check it yourself on the back of the router (it is usually marked).

2. Enter the administrator password and log in to the router. The image below shows the screen after logging in.

3. Click on the wireless settings to see all the options that can be set.

4. Click on the wireless host status, and you can see the device that is currently connected to the router.

5. Here are the key steps. Click [Wireless MAC Address Filter], and you will come to the MAC address list. As you can see in the image below, those are the list of MAC addresses that you added yourself earlier.

Note at the back to make a difference, "Status:" first select invalid, and finally take effect in the same selection. Then click Save.

7. Select the MAC address that allows the connection, and then click [Specify entry to take effect].

on the router"Wireless setup", there is one"MAC address filtering", click"Add an entry", fill in the MAC address to save, and then click on that"Enable filtering", select Allow access from the MAC address that takes effect in the list. Then add your own device on Mac. In this way, devices that are not on the list will be denied connection, no matter how many times they connect.

How to set up a wireless network to prevent others from rubbing the network:1. Change the router management address, management, and password. After logging in, modify the administrative address according to the following standard, and then save it.

2. After saving, continue to modify the router management and password according to the figure below, and then save.

3. Set the SSID to be hidden according to the following figure and save it.

4. Change the password to a more complex password to reduce the probability of the password being cracked. The settings are as follows:

5. Bind Mac, computers and mobile devices that are not included in your bound MAC address will not be able to connect to the Internet (unless the user knows the MAC address of your device, and then modifies the MAC of the device to your device MAC.) The settings are as follows:

6. Turn off the WPS function to prevent users from using the PIN code to connect to your network. The closure method is shown in the figure below

1. When the above functions are set, the router may automatically restart, so don't worry.

2. After the settings are completed, please remember your SSID and wireless password.

The WiFi name can be hidden, and it is encrypted with WAP.

Wi-Fi (pronunciation: wafa, French pronunciation: wifi), also known as "mobile hotspot" in Chinese, is a trademark of the Wi-Fi Alliance manufacturer as a brand certification for products, is a standard wireless LAN technology.

Due to the close relationship between the two systems, Wi-Fi is often used as a synonym for IEEE standards. "Wi-Fi" is often written as "WiFi" or "WiFi", but they are not recognized by the Wi-Fi Alliance.

Not every product that matches the IEEE applies for Wi-Fi Alliance certification, and a product that lacks Wi-Fi certification does not necessarily mean that it is not compatible with Wi-Fi devices.

IEEE devices are installed in many products on the market, such as personal computers, game consoles, *****, smartphones, tablets, printers, laptops, and other peripherals that can be used to access the Internet wirelessly.

This method is suitable for Android mobile phones, other Apple mobile phones, but due to the different mobile phone brands, systems and software versions, there are small differences in the operation steps, this time with the iphone11 system as the operation demonstration, the following shares the wifi setting does not let others rub the network password details, please see the following steps:

Here's how:1. Take Samsung S6 as an example, first open the wifi software in the mobile phone (different brands of routers need different software, here take tp-link as an example), as shown in the following figure:

2. After that, enter the password to log in to the wifi, as shown in the figure below

3. Then select the device function in the red box, as shown in the image below

4. Then you can see the current mobile phone model connected to wifi, as shown in the figure below

5. Click to enter the details function, if you want to propose wifi, select the disabling function in the red box, as shown in the figure below

How to do wifi without being rubbed off by others.

Here's how to set up wifi to prevent others from surfing the network:

2. Enter the management interface of the router and click "Security Firewall".

3. Enter the firewall interface and click "WiFi Anti-Rubbing Network".

4. Enter the following interface and click the "Whitelist Lu Slip" button.

5. At the bottom, it will prompt "Use whitelist mode, don't be careful to let the devices in the whitelist not be able to connect to the Internet", click "OK" to turn on "Whitelist mode".

6. Click the "Add Device" button.

7. On the pop-up page, add the device name and MAC address. If you don't know how to check the device name and MAC address, you can click on the blue font "How to find MAC address". Copy and paste the device name and MAC address into the whitelist input box, and then click Add to add the device to the whitelist.

Only devices in the whitelist can connect to wifi, and others cannot use the network.