How to set to ignore iPhone wireless network

What you do by ignoring a network is that it stops from connecting to the Internet and doesn't automatically connect again. If you want to reconnect to the network, select the network in the "Wi-Fi network" settings, and then enter the password (if you have one). Write a guide on iPhone 3GS.

The steps are as follows: 1) Find the Settings icon on the home screen and open it.

2) Under the list of settings, tap to select the "Wi-Fi" button.

4) Then, at the bottom of the screen, tap on the "Ignore this network" button.

5) Then, a prompt window will appear at the bottom of the screen, and the prompt will read: Ignore "so-and-so" to automatically stop joining this network. Tap the "Ignore" button to confirm the ignorance.

After your iPhone connects to a Wi-Fi network, you can also set to ignore the network for network connections. If you're looking for a better network, in the list of networks, look for the network with a stronger signal and tap to connect. Locked networks require a password.

If you have retained some of the Wi-Fi hotspot password data in your iPhone, you need to press the "Details" button on the right side of the hotspot and click the "Forget this network" button to delete the password data reserved for the hotspot if you can scan the hotspot.

If the hotspot cannot be scanned, the data cannot be deleted because it is stored encrypted.

1. As shown in the figure below, the Wi-Fi network on the iPhone.

The list of currently connected wireless networks.

It says "No internet connection.

2. Next, please click the [Ignore this network] option in the list, as shown in the figure below.

3. Then click the [Ignore] option, the purpose of this operation is to delete this network from the system on the iPhone, and then reconnect to the wireless network in a hidden place, and enter the wireless password.

4. If the problem still can't be solved after following the above methods, you can also reset the network settings of your iPhone. In the Settings - General list, find the Restore option, as shown in the image.

5. Next, in the list, click Reset Network Settings.

6. Finally, confirm that you can restore the network settings, wait for the restoration to be successful, and then try to access the wireless network.

Communication between two entities without a connected network service does not require a connection to be established beforehand. There are three types of connectionless services: datagrams, acknowledgments, deliveries, and requests.

The datagram service does not require a reply from the receiver. Although the additional overhead of this method is small, the reliability of this method cannot be guaranteed.

Acknowledgment delivery, also known as reliable datagrams, requires the receiving end to produce an acknowledgment for each packet. The request service requires the receiver user to send a reply packet back to the sender user for each packet received. Confirm the delivery by an email similar to **.

A request is similar to a user's "one-question-and-answer" in a transaction.

1.Start by opening Settings --- General.

1.Start by turning off Wi-Fi.

2.After turning on the Wi-Fi button, the Wi-Fi name that you have ignored will appear, so manually enter the password to connect.

Turn off the wireless network and re-enter, if this method doesn't work, go to Settings - General - Restore - Restore Network Settings, this method will not lose any of your other data, you can try, I hope it can help you.

Ignore this network is for previously connected wifi networks. After clicking Ignore, you simply forgot the password of the hotspot.

Recovery method: 1. Select a hotspot and click Ignore this network.

2. Turn off the wifi function of your phone.

3. Turn on the wifi function again, and pull down to refresh the list of networks that can be connected.

4. You will find that the network you just ignored appears, click to connect and enter the password to connect again.

iPhone -- Settings -- WiFi (wireless LAN) -- click on the name of the connected network to go in, but don't see it here Ignore this network? Paste the screenshot and take a look.

Settings - wifi (wireless local area network) - click on the name of the connected network to enter and there will be ignored networks.

1.Open the settings button of your iPhone.

2.Tap Turn on Wi-Fi features.

3.Once you're in, click on the small dot on the right.

4.Click to select Ignore this network.

5.After popping up, select Ignore it.

Only networks that are already connected or have been connected will have the option to ignore them.

Refer to the following post.,It's normal after restoring the network settings.,It's also a little guide for future generations.。

Here's how to set it up:

First of all, open the settings interface on your iPhone and find the [Wi-Fi] option in the settings interface.

Click the [Wireless LAN] option to enter the wireless LAN connection interface, and find the [Other] option, because the route is set to WiFi hidden, so the hidden WiFi cannot be searched by direct search.

Click the [Other] function button to enter the manual input interface of Hide WiFi, enter the name of the hidden WiFi set on the router, and select WPA2 for security, as shown in the figure below.

4. After selecting security, the password input box appears, enter the password of the hidden wifi in the password input box and click the [Join] button, and the iPhone can connect to the hidden wifi.

Further reading: This is also the case when other mobile phones are connected to hidden WiFi. Security chooses WPA2, WPA2 is the second version of WPA, which is a new encryption method based on WPA.

WPA2 is supported by most businesses and many new residential Wi-Fi products. As of March 2006, WPA2 has become a mandatory standard.

Open "Settings" to enter wireless, pull the wireless list to the bottom, add other networks, enter the wireless name (SSID) and password, wireless name, security, password, there are in the router's wireless list.

I used to be able to connect to the wireless network, but I suddenly found that I couldn't connect. For such a problem, we can first try to delete the wireless network information that has been connected to Xiaosou, and then reconnect.

First of all, please open the "Set Baizhi" app on the home screen, find the "Wireless LAN" bar in the settings list, and click Qiao Lao to enter. Next, in the Wi-Fi list, find the Wi-Fi network that you can't connect to, click the "Info" icon on the right, and then go to the Wi-Fi details list.

If it's a network you've asked before, you'll see the option to "Ignore this network", click on it to continue. Then click the "Ignore" button to confirm the deletion of the original connection information. Finally, reconnect to the Wi-Fi network and see the results.

Sometimes if you can't connect at one time, you can try to connect several times. If that doesn't work, try restarting your router and trying to connect again.

If none of the above methods work, you can also try to restore the system's network settings, which can be used to rule out problems with the phone system itself. Find the "General" column in the settings list, and click to enter it. Find the "Restore" column at the bottom of the general list and click to enter.

Click on the "Reset Network Settings Permissions" column in the restore list, if you currently set a lock screen password, you need to enter it here to continue. Then click on the "Reset Network Settings" button to start the restoration. When the restore is successful, try to reconnect to the wireless network.

Extend. 1.Apple iOS (iPhone Operation System) is a handheld device operating system developed by Apple Inc.

Apple first announced the system at MacWorld on January 9, 2007, and was originally designed for use in the iPhone, and later applied to Apple products such as iPod touch, iPad, and Apple TV. iOS, like Apple's Mac OS X operating system, is also based on Darwin, so it is also a Unix-like commercial operating system. Originally, the system was called iPhone OS, until it was announced at the WWDC conference on June 7, 2010, that it would be renamed iOS.

2.iOS (InternetWorking Operating System-Cisco, abbreviated as IOS), Cisco Network Configuration System. IOS is a complex operating system optimized for interconnectivity—similar to a local area operating system (NOS), such as Novell's Netware, optimized for LANS.

iOS provides a single set of rules for cost-effectively maintaining an Internet network over a long period of time. In short, it is a software architecture that is decoupled from hardware and can be dynamically upgraded to adapt to changing technologies (hardware and software) as network technologies continue to evolve. iOS can be thought of as an interconnection hub

A highly intelligent administrator who is responsible for managing the functions that control complex distributed network resources.

1. Find "Wireless LAN" in "Settings";

2. We will see that the iPhone has detected a lot of WiFi network stupidity, pull the interface to the lower end, and you can see that there is a "Other."

1. Find "Wireless LAN" in "Settings";

2. We will see that the iPhone has monitored a lot of WiFi networks, pull the interface to the lower end, and you can see that there is a file to accompany "other". Regardless of the pin.