My Honor 3c keeps staying on the boot interface, what should I do

We recommend that you try the following:

Unplug the battery and reinstall it to see if it can turn on normally.

Whether it can enter recovery. How to enter recovery: In the shutdown state, first press and hold the "volume up button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter recovery.

If you can enter Recovery, please switch the system under Recovery and back up your data, if it is not successful, you need to erase all your data (your contacts, text messages, mobile phone applications, etc. will disappear).

Whether it can enter fastboot. How to enter fastboot: In the shutdown state, first press and hold the "meter key", then press and hold the "volume down button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter fastboot.

Please connect your mobile phone to the computer and flash a complete system package with the method of miflash.

If this is still the case, please enter the after-sales process to detect the fault of your phone.

The first possibility is that the hardware problem can not be solved by installing software, and the voltage of the general mobile phone will be somewhat unstable after a period of use, and if the battery is replaced for a period of time, it will still be unstable and will automatically restart.

However, the automatic restart caused by this reason is generally not very frequent, and if it occurs more frequently, it is recommended that you replace the battery.

The second possibility, to solve the problem, you need to find out which two software are in conflict, generally from the system tool software, such as installing 360 mobile phone guard and security manager at the same time, this situation is easy to occur.

It's also possible that you have installed software that doesn't have good compatibility!

In the case of a stuck machine, it is recommended that: 1. Press and hold the power button for more than 10 seconds or try to press and hold the power button at the same time, and the volume reduction button will be forced to interrupt the power supply. 2. Or directly pull out the battery, turn off the battery completely, and then turn it back on.

Dear users, hello:

If you can enter recovery, you can double clear (double wipe), double clear does not flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button to prevent Li Sheng from collapsing, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

Flash the ROM from the corresponding mobile phone of the Internet to correct **,Then copy it to the root directory of the SD card,ROM is in ZIP format (you can open it to verify it,There must be meta-inf in the zip package,But don't change the files in the ZIP package),Don't unzip.。 After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it). (If it's just double clearing, stop at this step).

Select the fifth item, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start brushing the group.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

Hello !

According to your description, Huawei Honor 3C restarts indefinitely, we recommend that you try the following steps:

When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing this, restart and the repair is complete.

Hope this helps you!!