Wire cutting has the same accessories, why is there a big processing time gap between the two machin

There is a big gap between the parts of the same type of wire cutting when processing, first check whether the parameter settings of wire cutting are normal, and whether the cutting speed is normal.

The material of the copper wire, the material of the workpiece, the water quality, the wear degree of the conductive block, and the maintenance of the machine tool are all possible! Also, the degree of veneer processing you have twice may not be the same!

If the processing time of the two machines is very large, then it should be that the wear is relatively large.

Hello! Probably because the speed set by the two machines is not the same. There will also be a slight difference in the drawing, and the sharpness is not the same when cutting.

Though I say that it is the same two machines, at the time of setting. There may still be some time differences, which is also very normal, after all, when machining parts, the cutter head used is also said to be fast and unpleasant.

First, if it is the time of the accessory, the time of the accessory, there are still many differences in its time, because the system is different, and the time spent is not the same.

It is related to the processing conditions (such as voltage, current, water pressure, line tension, etc.). If it's all the same, it has something to do with the material.

The gap in cutting is large, the two machines, its power is different, that is, of course, the gap is large.

Cutting the same part, the processing time difference between the two machines is actually related to its torque and speed.

Now we are also accompanying Tan Jian in wire cutting, and there is a big gap between the two tail boxes when they are combined for processing, which is also because it is very normal.

Now cutting the same accessories, the two machines and the processing time gap is large. It's mainly for two people, what does this brother say? Well, his abilities are limited, the difference is too great.

Wire cutting is simply a principle similar to that of a wire saw, except that the rope is removed from the material in the form of discharge.

After the important parts on Saturday, why did the two machines not master the equipment and these skills in the old working hours, so what happened to the house?

And you need to find some professional and ask him to help you look at the distance, and then he may be able to make the most professional for you.

If you have different strengths, you have to be long, and the short ones are not necessarily good, and the strong ones are not necessarily long.

Wire cutting is the same accessory, as far as you look for some of the content of this accessory according to the technique, or pay attention to some of this.

Now let him get into the configuration, so that he can make these gaps choose to use, so because this triangle is still so selective, there is no score in the high examination papers.

Why is the processing time difference between the two machines with the same accessory, and Adi is particularly far from it.

Why is there a big gap in processing time between the two machines for the same accessories, it may be that you have not debugged it.

Wire cutting also fits two machines, why the processing time gap is large, this is mainly determined by the performance of the machine.

Wire cutting also fitted two machines, his processing time, his difference is a big thing, because their time is different.

Now cutting the same accessories, the gap between the two cameras and the processing time is large, and the gap between the two cameras and the processing time is particularly large if you want to cut the song with the same accessories.

The difference in processing time between two machines is due to the difference in the benefits of the same parts of wire cutting.

Wire cutting also has the same accessories, and there is a large gap between the two machines and the processing time, which is the difference in the product of the material.