-
If your Samsung phone can't charge properly, we recommend you to try it as follows:
1.Use the original charger to connect to the home power source for charging.
2.Replace the power outlet, try or change a data cable to connect to the charger for charging.
For phones with removable batteries, you can also try:
1) It is recommended to turn off the battery and remove it, and use a cotton swab to clean the battery contacts and the contact points where the phone connects to the battery. Try charging again after reinstalling the battery.
2) If possible, replace the battery or use the cradle to charge it.
3.If the phone can be turned on normally, it is recommended to back up the data in the phone (such as contacts, multiple files, etc.) and restore the phone to factory settings.
If the problem persists according to the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.
-
The phone is not turning on (some software is running).
-
1. Suddenly it can't be charged, but now it is displayed as charging, and the power supply is removed and there is no charge. Reason: Did you not use the original charger?
If you're using it, then your charger is broken. Very few people know if their charger is broken. There is also a problem with the data cable interface. Try changing the charger and cable.
2. The mobile phone is charged but the power is not enough, because there is a problem with the mobile phone system software, resulting in the battery being protected before the battery is fully charged.
You can take off the battery and have a universal charge to charge the battery,See if it can be full,If you can, it's a software problem.,Try the software within your next Android battery management.,If it doesn't work, it may be as if it's flashing.。
If it can't be fully charged, it may be a battery problem, so replace the battery.
3. There is also a loose charging interface of the mobile phone, which causes it to be unable to be charged, and the internal charging circuit is burned, which can only be repaired!
-
1. First of all, the mobile phone system is faulty, which causes problems with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.
2. Secondly, the charger is faulty. This malfunction is the main reason why the phone cannot be charged. So how to judge the quality of the charger.
It's actually very simple, try it with another charger. If it can be charged, then it can be concluded that the charger is faulty.
When you encounter this kind of problem, you have no choice but to buy another charger.
3. Poor contact between the charger and the mobile phone. This is also a common situation where the charger is not plugged in properly due to carelessness on the part of the phone user.
The solution is simple, it is to switch sockets back and forth.
4. There is a problem with the mobile phone battery. Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big problem and must be taken seriously.
Therefore, when it is found that the charger and mobile phone system are not faulty, you should focus on checking the battery. If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately.
Here's a word of advice for everyone, don't disassemble the battery indiscriminately. Because a swollen battery can easily cause **, bringing serious consequences.
5. There are quality problems in the mobile phone itself. If you buy a copycat phone, then there is a high probability that the mobile phone will malfunction. If it is a brand machine, it needs to be returned to the original factory for processing.
-
A common reason why your phone won't charge.
-
It's the original charger is the original charger that has been used, and the charging cable of another mobile phone has been used is now the original charger has been dropped, and the charging cable of another mobile phone has been used, and now the mobile phone can't be charged, is there a problem with the mobile phone battery, or?
-
The contact of the mobile phone is poor, and it is recommended to change the small opening of the mobile phone charging.
-
Hello dear Samsung users:
We welcome your comments on our services.
-
You can try a different cable...
Reasons for battery heating: The power consumption of the mobile phone in standby is very small, that is to say, the equivalent load resistance of its battery is large, so the discharge current is very small, so the battery will not heat up, and the internal consumption of battery power is very small. The power consumption of the mobile phone when it is ready to talk or use *** is very large, that is to say, the equivalent load resistance of its battery is small, and it is discharged with a high current when working. >>>More
Splash screen when charging, jump screen, are caused by too much ripple of the charger, screen display and touch control, are realized by the internal chip in the way of scanning, when the normal scanning signal is interfered with by too strong ripple, it is impossible to achieve normal touch control and display, there will be a splash screen, jump screen. Generally, replacing the charger can solve the problem 90% of the time. If you unplug the charger, or even start it again, it still flashes and jumps, and it basically has to be repaired, either to change the screen or change the chip.
If your phone won't charge, we recommend you try it as follows: >>>More
There are several possibilities, 1 is that the mobile phone is running out, and there is no response when it is just plugged in, and it will be fine after a while. 2.The phone is not in good contact, or it is not plugged in properly. >>>More
1. If you can't turn on the machine, the biggest possibility is that it can't be turned on due to insufficient power. Check to see if the plug is plugged in properly and confirm that the phone is charging. >>>More