-
The wireless router does not need to be reset after the power is off.
Power Off: The router configuration will not be deleted.
Reset: The router is factory reset and the data is emptied.
Added: Router Setup Tutorial].
Home Network Environment Cabling]:
1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.
2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.
Computer enters the router]:
1. The computer IP and DNS settings are automatically obtained.
2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).
Set Router Dialing]:
1. In the [Setup Wizard], select [PPPoE Dialing] (some are ADSL dialing), enter the username and password (provided by the network service provider) according to the prompts, and save.
2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.
-
This is fine, it's not that you can't go up when the power is off, but to give him time, and when the power is off, it will be stuck on the server, and it will take a while to get online.
-
The use of wireless sail sprammer is very popular, in order to make mobile phones or tablets and other devices better use the wireless wifi network, I believe that many users will buy a wireless router to connect and use, in use will inevitably encounter problems such as network disconnection or restart the router, then you need to set the router automatic connection mode, of course, users can set the router connection mode according to personal needs, this article mainly introduces the router automatic connection setting tutorial.
Auto-connect method:
1. Enter or directly in the browser address bar, and then enter the password, the default is admin.
2. Enter the router configuration interface, and then click on the network parameters - WLAN port settings.
3. Fill in the Internet access and password, the password of this place is left by the operator and the password when installing the network, so you must remember it.
4. Select the auto-connect (auto-connect after power-on and disconnection) option, and then save it directly.
5. Check the running status.
From the ghost win7 router setting interface, you can see that there are four connection modes of the router,On-demand connection、Automatic connection、Timing connection and manual bridge simple connection,Users can set the routing sensitive car pants connection mode according to their personal needs,The setting methods of different routers will be somewhat different,But everything is the same,I hope it will help you set up the router connection method。
-
Set up the Internet access method after the router is powered off:
Steps. 1. Plug in the router.
If you still can't access the internet, please see Step 2.
Steps. 2. Set up router dialing.
1. Open the browser - enter the general router address is this) incoming route - enter the user name and password, (the default is admin).
2. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.
-
No, you don't.
In the case of ensuring that the broadband account and password remain unchanged, there is no need to reset the Internet access parameters after the wireless router is powered off.
There are a few situations where you need to reset the Internet access parameters:
The wireless router is faulty and the wireless network cannot be used normally;
The wireless router is reset to factory mode;
The broadband account and password have been changed.
-
This is fine, it's not that you can't go up when the power is off, but to give him time, the power-off account is stuck on the server, and it will take a while to go online Follow-up question: Well, it won't be possible to wait for half a day Answer: Then you go to the routing settings interface to see the running status, what is the situation Follow-up question:
Unicom adsl has been dialing Answer: Then reset it, the general route does not need to be set Follow-up question: After resetting the route, it will not restart or that, I only know that the power is off and set up overnight Answer:
You're fine with soft-up routing, is there something wrong with your line? Follow-up question: There is a small button in the back and long press to restart it doesn't work, the line must be good, Wireless router can't be directly on after power off Answer:
Then go and test your routing, if it's set up right, there is no problem with the line, it's only a problem with the routing Follow-up: I can use it overnight.
-
That's the problem of the router, and it generally doesn't need to be reset after the power is off.
Ways to resolve router setup exceptions:
Press (hold for 5 seconds) the router's reset button and wait until all the lights are on together for the reset to be successful.
After the reset is successful, you will need to set up the router again (there is a wizard), because it has been restored to the factory defaults.
Resources.
-
Hand support specifies DNS,There are in the WAN port network parameters,Each province is different,It's best to look at the information in the local connection when you can access the Internet,You can find it,Or use cmd,Enter ipconfig You can also see Adopt it to praise。
-
Set up routes, enable DHCP, set DNS, and specify the IP address for your computer
Computer network IP automatic.
Press and hold the reset button on the back of the router to factory reset the router and then reinstall the router again. >>>More
The installation and setup of the router is as follows:
1.First connect the line, you can refer to the figure below. >>>More
The router can't connect to the internet.
More often than not, when our computer can't play, we all wonder if it's a problem with the computer. And if our computer can get the IP normally when still can't access the Internet, this may be the problem of the router, if you encounter the problem that the router can't connect to the Internet, the following will introduce the solution for you. >>>More
1. Check the IP first, method: win+r--- enter: cmd--- enter in the black and white interface: ipconfig, press enter. >>>More
Here's how to reset your wireless router.
1. The broadband network cable or the network cable out of the cat is connected to the WAN port of the router, and the LAN port is connected to the computer. >>>More