How to reset the 360 router

Here's how to reset your wireless router.

1. The broadband network cable or the network cable out of the cat is connected to the WAN port of the router, and the LAN port is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

The router has a reset button, through which after the router is restored to factory settings, you can log in to the router's settings interface with the original password and set it again.

Calculate how much it will cost you to renovate your home

The 360 router is an important network device, as long as the friends who want to use wifi at home need to use it. However, in the process of use, some owners reported that the wifi password of their home was known and wanted to change it. So how do you reset a 360 router?

How to reset the 360 router:

Router reset is relatively simple, first press and hold the reset button on the back of the router with your hand and do not release, after 15 seconds, if all the indicators of the router are flashing, it means that the factory reset is successful, and you can release the button; You can also go to the router settings page to find the factory reset function, wait a little longer, and you can resume the reset, but note that this process cannot be powered off.

What to pay attention to when using the router:

1. First of all, all routers will be optimized before leaving the factory, and you can access the Internet with simple installation, so if there is no special need, you don't need to make other changes. And in order to prevent others from abusing the bandwidth, you can also turn on the router's traffic control function.

2. Secondly, when installing the router, it should be noted that there should not be too many obstacles around the location, try to place it in a high and wide place, and it should not be too close to other wireless devices, such as microwave ovens and other equipment, otherwise it will cause interference to the router. At the same time, if you find that the network connection of the wireless computer finds excess signal information, you should also delete it.

3. Then, in order to avoid the compatibility problem of wap, for example, if there is no signal or drop in wireless, you can update the wireless network card, and if the wireless function of the router is not properly set, it will also affect the network operation. It is recommended to update and optimize in a timely manner.

4. Finally, when using the router, check the network cable regularly to see if there is aging and damage, otherwise it will lead to the inability to access the Internet. Moreover, the computer should also carry out anti-virus and patch packages in time to improve the security of the network.

Summary: The above is the relevant content of how to reset the 360 router and what to pay attention to when using the router, I hope to help friends in need, if you need to know more about related knowledge in the later stage, welcome to pay attention to Qi Meng Pinjia.com.

Enter the area and get the decoration for free**].

[Calculate how much it will cost you to renovate your home].

With the advent of the Internet information age, it is no longer difficult for every household to enjoy Internet surfing, in order to improve the use experience, a lot of space will achieve network sharing, which requires the use of routers to achieve, so how to set up 360 routers? Let's take a look today!

How to set up a 360 router:

First, go to the control panel, click "Network & Internet", and find the "Change Adapter Settings" option; Then click "Properties" in "Target Network", find "Internet Protocol", and click to get the IP address; Finally, click Start Settings and Connect to the network on the router page. Set the account and password at the same time to save it to take effect.

1. How to set up the 360 router - computer.

Plug in the router and power it on, connect the yellow port of the router to one end of the broadband network cable, the gray port to the other end of the broadband network cable, and one port is not connected to the computer.

2. Then change the computer attributes to IP and DNS address". If the computer system has defaulted, just click OK; Then connect your computer browser to the router settings interface, select the "broadband PPPOE" Internet access method, and enter the broadband account and broadband password.

3. Finally, change the wifi name, enter the wifi password, and tick the wifi password and router password options at the same time to set it successfully.

2. How to set up the 360 router - mobile phone.

1. First, connect the 360 router interface to the modem network port. If you don't use the optical modem, plug the broadband network cable directly into the 360 router interface.

2. Then connect the mobile phone to the signal of the 360 router, you can first turn on the WLAN of the mobile phone, find the wifi signal name of the 360 router in the search list, and connect it.

3. Finally, click on the mobile browser, enter **, and click to start configuration, and you can connect to the Internet to surf the Internet.

Summary: The above is the relevant content of how to set up the 360 router for everyone, I hope to help friends in need, if you need to know more about relevant knowledge in the future, welcome to pay attention to Qeeka Home information.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

The 360 router is a stable and powerful network device. If you need to reset it, you can do so by following these steps:

The first step is to enter the 360 router management interface. You can connect the router wifi through your computer or mobile phone, and type "to enter the management interface" in the browser. If you've changed your login password before, you'll need to enter the correct password to log in.

Step 2: Enter the router settings interface. In the left navigation bar of the management interface, click "Setup Wizard" and select "Reset Router".

Step 3: Select the network type. Depending on the type of network provided by your ISP, you can choose the following options including ADSL, dynamic IP, static IP, PPPoE, etc. If you are unsure, you can contact your internet service provider.

Step 4: Set up internet access and password. According to the option selected by the type of network enlightenment, enter the corresponding password information. If you don't know the password, you can contact your internet service provider to get it.

Step 5, Set the wifi name and password. On the WiFi Settings screen, enter the Wi-Fi name and password you want to set, and select an encryption method. We recommend that you select WPA2-PSK encryption to ensure network security.

Step 6: Save the settings and restart the router. After the setup is complete, click the "Save" button and wait for the router to restart. After restarting, you need to reconnect to the wifi and enter a new wifi password to access the internet.

The above are the steps to reset the 360 router, I hope it can help you. If you encounter any problems during the setup process, you can refer to the router's user manual or contact 360 customer service for help.

Summary. The first step is to restore the factory settings of the router that has been configured, and when resetting it to surf the Internet, the 192 routing network is recommended to restore it to factory settings first. The method of factory reset of 360 router is also very simple, press and hold the RESET button for about 10 seconds, and you can restore the factory settings.

For a used 360 router, when you reset it to surf the Internet, it is recommended to follow the steps below on the 192 router. Restore the factory settings, set the router line connection, set the computer IP address, set the router to surf the Internet, and check whether the settings are successful.

The first step is to restore the factory settings of the router that has been configured, and when resetting it to surf the Internet, the 192 routing network is recommended to restore it to factory settings first. The method of factory reset of 360 router is also very simple, press and hold the RESET button for about 10 seconds, and you can restore the factory settings. Tips:

When the router is powered on, press and hold the reset button.

First, restore the 360 router to factory settings The second step, the router line is connected to the WAN port of the router, and you need to use a network cable to connect to the network port (LAN port) of the cat; If you don't use a cat for your home broadband, you need to plug the broadband network cable into the WAN port. 2. Connect your home computer to any of the interfaces with a network cable.

Tips: When the computer is set up to connect the Internet on the router, the computer does not need to be in the network state, please remember this. Step 3, set the computer IP address, you need to set the computer's IP address, set to automatically obtain (dynamic IP), set the computer IP address, set to automatically get the fourth step, set the router to surf the Internet 1, open the settings interface in the computer's browser input:

Or open the settings screen – > click: Get Started or Turn on Now.

2. Set Internet Access: The 360 router will automatically detect the Internet access mode of your home broadband, please set the corresponding Internet access parameters according to the detection results.

3. Set wireless parametersAfter the Internet parameters are set successfully, you will automatically enter the setting page of wireless parameters.